NXP USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
UJA1168TK/FDJ
Lihat Detail Lembar Data

UJA1168TK/FDJ

Product Overview

Category

UJA1168TK/FDJ belongs to the category of integrated circuits (ICs) specifically designed for automotive applications.

Use

This product is primarily used in automotive electronic systems, providing various functionalities related to communication and control.

Characteristics

  • UJA1168TK/FDJ is a highly reliable and robust IC designed to withstand harsh automotive environments.
  • It offers advanced features such as fault detection and diagnosis, making it suitable for safety-critical applications.
  • The IC is capable of handling multiple communication protocols commonly used in automotive networks.

Package

UJA1168TK/FDJ is available in a compact and industry-standard package, ensuring compatibility with existing automotive electronic systems.

Essence

The essence of UJA1168TK/FDJ lies in its ability to facilitate efficient and secure communication between different components within an automotive network.

Packaging/Quantity

This product is typically packaged in reels or tubes, with varying quantities depending on customer requirements.

Specifications

  • Supply Voltage: 5V
  • Operating Temperature Range: -40°C to +125°C
  • Communication Protocols Supported: CAN, LIN, FlexRay
  • Number of Pins: 32
  • Package Type: TQFP

Detailed Pin Configuration

  1. VBAT
  2. GND
  3. CANH
  4. CANL
  5. LIN
  6. FlexRay
  7. ... (Detailed pin configuration continues)

Functional Features

  • Fault detection and diagnosis capabilities ensure system reliability and safety.
  • Support for multiple communication protocols enables compatibility with various automotive networks.
  • Low power consumption for efficient operation.
  • Integrated protection features safeguard against electrical transients and faults.

Advantages and Disadvantages

Advantages

  • Robust design suitable for automotive environments.
  • Comprehensive fault detection and diagnosis capabilities.
  • Wide range of supported communication protocols.
  • Compact package size for easy integration into existing systems.

Disadvantages

  • Limited pin count may restrict the number of connections to other components.
  • Higher cost compared to non-automotive-specific ICs.

Working Principles

UJA1168TK/FDJ operates by receiving and transmitting signals according to the selected communication protocol. It incorporates various internal circuits and algorithms to ensure reliable data transfer, fault detection, and diagnosis. The IC interfaces with other components in the automotive network, facilitating seamless communication and control.

Detailed Application Field Plans

UJA1168TK/FDJ finds extensive application in the automotive industry, including but not limited to:

  1. Body Control Modules (BCMs)
  2. Engine Control Units (ECUs)
  3. Transmission Control Units (TCUs)
  4. Infotainment Systems
  5. Advanced Driver Assistance Systems (ADAS)

Detailed and Complete Alternative Models

  1. UJA1169TK/FDJ
  2. UJA1170TK/FDJ
  3. UJA1171TK/FDJ
  4. ... (List of alternative models continues)

These alternative models offer similar functionalities and characteristics, providing customers with options based on their specific requirements.

Word count: 430 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan UJA1168TK/FDJ dalam solusi teknis

  1. What is the UJA1168TK/FDJ used for?
    - The UJA1168TK/FDJ is a high-speed CAN FD transceiver designed for use in automotive and industrial applications.

  2. What is the maximum data rate supported by the UJA1168TK/FDJ?
    - The UJA1168TK/FDJ supports data rates up to 5 Mbps for CAN FD communication.

  3. Can the UJA1168TK/FDJ be used in harsh automotive environments?
    - Yes, the UJA1168TK/FDJ is designed to operate in harsh automotive environments, with a wide operating temperature range and robust EMC performance.

  4. Does the UJA1168TK/FDJ support wake-up functionality?
    - Yes, the UJA1168TK/FDJ features wake-up functionality, allowing it to wake up from low-power modes in response to specific events on the CAN bus.

  5. Is the UJA1168TK/FDJ compatible with 5V and 3.3V microcontrollers?
    - Yes, the UJA1168TK/FDJ is compatible with both 5V and 3.3V microcontrollers, making it versatile for various system designs.

  6. Can the UJA1168TK/FDJ handle fault protection for the CAN bus?
    - Yes, the UJA1168TK/FDJ includes built-in fault protection features to safeguard the CAN bus against overvoltage, undervoltage, and other fault conditions.

  7. What diagnostic features are available with the UJA1168TK/FDJ?
    - The UJA1168TK/FDJ provides comprehensive diagnostic capabilities, including bus error detection, thermal warning, and more.

  8. Is the UJA1168TK/FDJ compliant with automotive industry standards?
    - Yes, the UJA1168TK/FDJ complies with relevant automotive industry standards such as ISO 11898-2 and ISO 11898-5.

  9. Can the UJA1168TK/FDJ be used in multi-node CAN networks?
    - Yes, the UJA1168TK/FDJ is suitable for use in multi-node CAN networks, offering reliable communication between nodes.

  10. What is the recommended layout and PCB design for integrating the UJA1168TK/FDJ?
    - The datasheet for the UJA1168TK/FDJ provides guidelines for recommended layout and PCB design to ensure optimal performance and EMC compliance.