Lihat spesifikasi untuk detail produk.
PZM5.6NB2,115 Product Overview
Introduction
PZM5.6NB2,115 is a semiconductor product belonging to the category of Zener diodes. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of PZM5.6NB2,115.
Basic Information Overview
- Category: Zener Diodes
- Use: Voltage regulation and protection in electronic circuits
- Characteristics: High precision voltage reference, low leakage current, and high reliability
- Package: SOD-123FL package
- Essence: Zener diode for voltage regulation
- Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel
Specifications
- Voltage - Zener (Nom) (Vz): 5.6V
- Power - Max: 500mW
- Impedance (Max) (Zzt): 20 Ohm
- Current - Reverse Leakage @ Vr: 100nA @ 3V
- Operating Temperature: -65°C ~ 150°C
Detailed Pin Configuration
The PZM5.6NB2,115 Zener diode has a standard SOD-123FL package with two pins. The anode is connected to pin 1, and the cathode is connected to pin 2.
Functional Features
- Precise voltage regulation at 5.6V
- Low reverse leakage current
- High reliability and stability over a wide temperature range
Advantages and Disadvantages
Advantages
- Provides accurate voltage regulation
- Low leakage current ensures minimal power loss
- Compact SOD-123FL package for space-constrained applications
Disadvantages
- Limited power dissipation capability compared to higher wattage diodes
- Sensitive to voltage and current fluctuations
Working Principles
PZM5.6NB2,115 operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse-biased. It achieves this by allowing current to flow in the reverse direction when the applied voltage reaches the Zener voltage.
Detailed Application Field Plans
PZM5.6NB2,115 is commonly used in various electronic circuits requiring stable voltage references and protection against voltage spikes. Typical applications include: - Voltage regulators in power supplies - Overvoltage protection in consumer electronics - Signal clamping and limiting circuits
Detailed and Complete Alternative Models
- PZM5.1NB2,115: 5.1V Zener diode with similar characteristics
- PZM6.2NB2,115: 6.2V Zener diode with similar characteristics
- PZM4.7NB2,115: 4.7V Zener diode with similar characteristics
In conclusion, PZM5.6NB2,115 is a reliable Zener diode offering precise voltage regulation and protection in electronic circuits. Its compact package and stable performance make it suitable for a wide range of applications.
Word count: 410
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PZM5.6NB2,115 dalam solusi teknis
What is PZM5.6NB2,115?
- PZM5.6NB2,115 is a specific type of diode used in electronic circuits for voltage regulation and rectification.
What are the key features of PZM5.6NB2,115?
- PZM5.6NB2,115 is a Zener diode with a voltage rating of 5.6V, low leakage current, and high reliability, making it suitable for precision voltage regulation applications.
How is PZM5.6NB2,115 used in voltage regulation?
- PZM5.6NB2,115 can be used to stabilize and regulate voltage in electronic circuits by maintaining a constant output voltage across its terminals.
What are the typical applications of PZM5.6NB2,115?
- PZM5.6NB2,115 is commonly used in power supplies, voltage regulators, and other electronic devices requiring stable voltage references.
What is the maximum power dissipation of PZM5.6NB2,115?
- The maximum power dissipation of PZM5.6NB2,115 is typically specified by the manufacturer and should be observed to prevent overheating and damage.
What is the temperature coefficient of PZM5.6NB2,115?
- The temperature coefficient indicates how the voltage reference of the diode changes with temperature and is an important parameter to consider in various operating conditions.
Can PZM5.6NB2,115 be used in reverse bias?
- Yes, PZM5.6NB2,115 can be used in reverse bias for certain applications such as voltage clamping and protection circuits.
What are the recommended operating conditions for PZM5.6NB2,115?
- It is important to operate PZM5.6NB2,115 within its specified voltage, current, and temperature limits to ensure proper functionality and longevity.
How does PZM5.6NB2,115 compare to other Zener diodes?
- PZM5.6NB2,115 may have different voltage ratings, power dissipation capabilities, and temperature coefficients compared to other Zener diodes, so it's essential to select the appropriate diode for the specific application.
Where can I find detailed specifications and application notes for PZM5.6NB2,115?
- Detailed specifications and application notes for PZM5.6NB2,115 can typically be found in the datasheet provided by the manufacturer or distributor.