NXP USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MP3V5010GC6T1
Lihat Detail Lembar Data

MP3V5010GC6T1

Introduction

The MP3V5010GC6T1 is a pressure sensor belonging to the category of micro-electro-mechanical systems (MEMS) sensors. This sensor is widely used in various applications due to its compact size, high accuracy, and low power consumption.

Basic Information Overview

  • Category: MEMS Pressure Sensor
  • Use: Measure absolute pressure in various applications
  • Characteristics: Small size, high accuracy, low power consumption
  • Package: Surface mount
  • Essence: Accurate pressure measurement
  • Packaging/Quantity: Typically available in reels of 2500 units

Specifications

  • Pressure Range: 0 to 10 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Operating Temperature: -40°C to 125°C
  • Output Type: Analog Voltage
  • Accuracy: ±1.5% Full Scale Span (typical)

Detailed Pin Configuration

The MP3V5010GC6T1 has a total of 6 pins: 1. VDD - Power supply input 2. VSS - Ground 3. VOUT - Analog voltage output 4. NC - No connection 5. NC - No connection 6. NC - No connection

Functional Features

  • High sensitivity to small pressure changes
  • Low power consumption for energy-efficient operation
  • Robust design suitable for harsh environments

Advantages and Disadvantages

Advantages

  • Compact size
  • High accuracy
  • Low power consumption

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MP3V5010GC6T1 operates on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their value, resulting in a corresponding change in the output voltage.

Detailed Application Field Plans

This sensor is commonly used in: - Medical devices - HVAC systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

  1. MP3V5004DP: Similar performance with digital output
  2. MP3V5050DP: Higher pressure range with digital output
  3. MP3V5004G: Lower pressure range with analog output

In conclusion, the MP3V5010GC6T1 is a versatile MEMS pressure sensor with high accuracy and low power consumption, making it suitable for a wide range of applications.

Word Count: 340

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MP3V5010GC6T1 dalam solusi teknis

  1. What is MP3V5010GC6T1?

    • MP3V5010GC6T1 is a pressure sensor designed for use in automotive and industrial applications.

  2. What is the operating voltage range of MP3V5010GC6T1?

    • The operating voltage range of MP3V5010GC6T1 is typically 4.75V to 5.25V.

  3. What is the pressure range that MP3V5010GC6T1 can measure?

    • MP3V5010GC6T1 can measure pressure in the range of 0 to 10 kPa.

  4. What is the output signal type of MP3V5010GC6T1?

    • MP3V5010GC6T1 provides an analog output signal.

  5. Can MP3V5010GC6T1 be used in harsh environments?

    • Yes, MP3V5010GC6T1 is designed to operate in harsh environments and is suitable for automotive and industrial applications.

  6. What is the accuracy of MP3V5010GC6T1?

    • The accuracy of MP3V5010GC6T1 is typically within ±1.5% full scale span.

  7. Is MP3V5010GC6T1 suitable for measuring air pressure in automotive intake manifolds?

    • Yes, MP3V5010GC6T1 is commonly used for measuring air pressure in automotive intake manifolds.

  8. Does MP3V5010GC6T1 require external calibration?

    • MP3V5010GC6T1 is factory calibrated and does not require external calibration.

  9. What are the typical applications of MP3V5010GC6T1?

    • Typical applications of MP3V5010GC6T1 include tire pressure monitoring systems, engine control systems, and industrial process control.

  10. Is MP3V5010GC6T1 RoHS compliant?

    • Yes, MP3V5010GC6T1 is RoHS compliant, making it suitable for use in environmentally conscious designs.