NXP USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MMA6828AKGWR2

MMA6828AKGWR2

Introduction

The MMA6828AKGWR2 is a sensor product belonging to the category of accelerometers. This device is commonly used for measuring acceleration, tilt, and vibration in various applications. The following entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the MMA6828AKGWR2.

Basic Information Overview

  • Category: Accelerometer Sensor
  • Use: Measurement of acceleration, tilt, and vibration
  • Characteristics: High sensitivity, low power consumption, compact size
  • Package: Surface-mount package
  • Essence: Accurate measurement of dynamic acceleration
  • Packaging/Quantity: Typically available in reels of 2500 units

Specifications

  • Sensitivity: 100 mV/g
  • Operating Voltage: 1.8V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Output Type: Analog
  • Bandwidth: 0.5 Hz to 1600 Hz
  • Noise: 120 µg/√Hz

Detailed Pin Configuration

The MMA6828AKGWR2 has a standard 16-pin surface-mount package with the following pin configuration: 1. VDD 2. GND 3. XOUT 4. YOUT 5. ZOUT 6. NC 7. NC 8. NC 9. NC 10. NC 11. NC 12. NC 13. NC 14. NC 15. NC 16. NC

Functional Features

  • High sensitivity for accurate measurement
  • Low power consumption for extended battery life
  • Wide operating temperature range for versatile applications
  • Analog output for compatibility with various systems

Advantages and Disadvantages

Advantages

  • Accurate measurement of dynamic acceleration
  • Compact size for easy integration into various devices
  • Low power consumption for extended battery life

Disadvantages

  • Limited bandwidth compared to some high-end accelerometers
  • Analog output may require additional signal conditioning in certain applications

Working Principles

The MMA6828AKGWR2 operates based on the principle of microelectromechanical systems (MEMS) technology. It utilizes a capacitive sensing element to measure changes in capacitance caused by acceleration. These changes are then converted into analog voltage signals proportional to the applied acceleration.

Detailed Application Field Plans

The MMA6828AKGWR2 finds extensive use in various applications, including: - Industrial machinery monitoring - Structural health monitoring - Automotive safety systems - Consumer electronics, such as smartphones and gaming devices - Wearable fitness and activity trackers

Detailed and Complete Alternative Models

Some alternative models to the MMA6828AKGWR2 include: - ADXL345 from Analog Devices - LIS3DH from STMicroelectronics - KX022 from Kionix - BMA250E from Bosch Sensortec

In conclusion, the MMA6828AKGWR2 accelerometer sensor offers high sensitivity, low power consumption, and compact size, making it suitable for diverse applications requiring accurate measurement of dynamic acceleration, tilt, and vibration.

[Word Count: 443]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MMA6828AKGWR2 dalam solusi teknis

  1. What is the MMA6828AKGWR2 accelerometer used for?

    • The MMA6828AKGWR2 accelerometer is commonly used for measuring acceleration, tilt, and motion in various technical solutions.

  2. What is the operating voltage range of the MMA6828AKGWR2?

    • The operating voltage range of the MMA6828AKGWR2 is typically between 1.71V and 3.6V.

  3. Can the MMA6828AKGWR2 be used for vibration monitoring?

    • Yes, the MMA6828AKGWR2 can be used for vibration monitoring due to its high sensitivity and low noise characteristics.

  4. What is the output data rate of the MMA6828AKGWR2?

    • The output data rate of the MMA6828AKGWR2 can be configured up to 800Hz, allowing for precise measurement of dynamic movements.

  5. Is the MMA6828AKGWR2 suitable for battery-powered applications?

    • Yes, the MMA6828AKGWR2's low power consumption makes it well-suited for battery-powered applications.

  6. Does the MMA6828AKGWR2 support I2C communication?

    • Yes, the MMA6828AKGWR2 supports I2C communication, providing a convenient interface for integration into digital systems.

  7. What are the typical applications of the MMA6828AKGWR2?

    • Typical applications of the MMA6828AKGWR2 include industrial equipment monitoring, wearable devices, and motion-based user interfaces.

  8. Can the MMA6828AKGWR2 withstand harsh environmental conditions?

    • The MMA6828AKGWR2 is designed to withstand harsh environmental conditions, making it suitable for rugged industrial applications.

  9. What is the resolution of the MMA6828AKGWR2?

    • The MMA6828AKGWR2 offers high resolution, enabling precise measurement of accelerations as small as 0.244 mg/LSB.

  10. Is the MMA6828AKGWR2 RoHS compliant?

    • Yes, the MMA6828AKGWR2 is RoHS compliant, ensuring environmental friendliness and regulatory compliance.