NXP USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MM912F634DV2AER2
Lihat Detail Lembar Data

MM912F634DV2AER2

Product Overview

Category

The MM912F634DV2AER2 belongs to the category of automotive integrated circuits.

Use

This product is specifically designed for use in automotive applications, providing various functionalities and features to enhance the performance and efficiency of automotive systems.

Characteristics

  • High reliability: The MM912F634DV2AER2 is built to withstand harsh automotive environments, ensuring reliable operation under extreme conditions.
  • Advanced functionality: This integrated circuit offers a wide range of advanced features, including real-time monitoring, control, and communication capabilities.
  • Compact package: The MM912F634DV2AER2 comes in a compact package, allowing for easy integration into automotive electronic systems.
  • Low power consumption: With its efficient design, this IC minimizes power consumption, contributing to overall energy efficiency in automotive applications.

Package and Quantity

The MM912F634DV2AER2 is typically packaged in a small outline integrated circuit (SOIC) package. The quantity may vary depending on the supplier or specific requirements.

Specifications

  • Operating voltage: 3.3V
  • Temperature range: -40°C to +125°C
  • Communication interface: CAN (Controller Area Network)
  • Memory capacity: 64 KB Flash, 4 KB RAM
  • Clock frequency: Up to 16 MHz

Detailed Pin Configuration

The MM912F634DV2AER2 has a total of 32 pins, each serving a specific function. Here is a detailed pin configuration:

  1. VDD: Power supply input
  2. VSS: Ground connection
  3. RESET: Reset signal input
  4. XTAL1: Crystal oscillator input
  5. XTAL2: Crystal oscillator output
  6. CANH: CAN bus high-level signal
  7. CANL: CAN bus low-level signal
  8. RXD: Serial data receive input
  9. TXD: Serial data transmit output
  10. INT: Interrupt signal output
  11. ADC0: Analog-to-digital converter input 0
  12. ADC1: Analog-to-digital converter input 1
  13. ADC2: Analog-to-digital converter input 2
  14. ADC3: Analog-to-digital converter input 3
  15. ADC4: Analog-to-digital converter input 4
  16. ADC5: Analog-to-digital converter input 5
  17. ADC6: Analog-to-digital converter input 6
  18. ADC7: Analog-to-digital converter input 7
  19. VREFH: High-level reference voltage input
  20. VREFL: Low-level reference voltage input
  21. ANA0: Analog input/output 0
  22. ANA1: Analog input/output 1
  23. ANA2: Analog input/output 2
  24. ANA3: Analog input/output 3
  25. ANA4: Analog input/output 4
  26. ANA5: Analog input/output 5
  27. ANA6: Analog input/output 6
  28. ANA7: Analog input/output 7
  29. TEST: Test mode selection input
  30. OSCOUT: Oscillator output
  31. OSCIN: Oscillator input
  32. NC: No connection

Functional Features

The MM912F634DV2AER2 offers several functional features that make it a valuable component in automotive applications:

  1. Real-time monitoring: This IC allows for real-time monitoring of various parameters, such as temperature, voltage, and current, enabling efficient system management.
  2. Control capabilities: With its integrated control functions, the MM912F634DV2AER2 can regulate and adjust different aspects of automotive systems, ensuring optimal performance.
  3. Communication interface: The CAN communication interface enables seamless data exchange between the MM912F634DV2AER2 and other components in the automotive network, facilitating efficient system integration.
  4. Analog-to-digital conversion: The built-in analog-to-digital converter (ADC) enables accurate measurement and conversion of analog signals, providing valuable data for system analysis and control.

Advantages and Disadvantages

Advantages

  • High reliability in harsh automotive environments
  • Advanced functionality for enhanced system performance
  • Compact package for easy integration
  • Low power consumption for improved energy efficiency

Disadvantages

  • Limited memory capacity compared to some other automotive ICs
  • Requires expertise in automotive electronics for proper utilization

Working Principles

The MM912F634DV2AER2 operates based on a combination of hardware and software algorithms. It utilizes its integrated circuits and communication interfaces to monitor, control, and communicate with various automotive systems. By analyzing sensor inputs, executing control algorithms, and exchanging data through the CAN bus, this IC ensures efficient operation and coordination of different components within the automotive system.

Detailed Application Field Plans

The

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MM912F634DV2AER2 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MM912F634DV2AER2 in technical solutions:

  1. Q: What is MM912F634DV2AER2? A: MM912F634DV2AER2 is a highly integrated system basis chip (SBC) designed for automotive applications, providing power management and communication functions.

  2. Q: What are the key features of MM912F634DV2AER2? A: The key features include LIN transceiver, voltage regulator, watchdog timer, fail-safe mode, low-power modes, and various communication interfaces.

  3. Q: How can MM912F634DV2AER2 be used in automotive applications? A: MM912F634DV2AER2 can be used as a central hub for managing power distribution, communication, and control functions in automotive electronic systems.

  4. Q: Can MM912F634DV2AER2 support multiple LIN bus networks? A: Yes, MM912F634DV2AER2 supports up to two LIN bus networks, making it suitable for applications requiring multiple LIN communication channels.

  5. Q: Does MM912F634DV2AER2 have built-in protection features? A: Yes, MM912F634DV2AER2 includes various protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  6. Q: What is the operating voltage range of MM912F634DV2AER2? A: MM912F634DV2AER2 operates within a wide voltage range of 5V to 27V, making it compatible with different automotive power supply systems.

  7. Q: Can MM912F634DV2AER2 be used in non-automotive applications? A: While MM912F634DV2AER2 is primarily designed for automotive applications, it can also be used in other industrial and embedded systems that require similar functionalities.

  8. Q: Does MM912F634DV2AER2 support communication protocols other than LIN? A: Yes, MM912F634DV2AER2 supports additional communication interfaces such as SPI and I2C, allowing integration with other devices or microcontrollers.

  9. Q: Is MM912F634DV2AER2 compatible with other Freescale/NXP products? A: Yes, MM912F634DV2AER2 is part of the NXP SBC family and can be easily integrated with other compatible devices from Freescale/NXP.

  10. Q: Are evaluation boards or development kits available for MM912F634DV2AER2? A: Yes, NXP provides evaluation boards and development kits specifically designed for MM912F634DV2AER2, which can help streamline the design and development process.

Please note that these answers are general and may vary depending on specific application requirements.