NXP USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MCZ33897EFR2
Lihat Detail Lembar Data

MCZ33897EFR2

Product Overview

  • Category: Integrated Circuit
  • Use: Automotive Electronics
  • Characteristics: High-Speed CAN Transceiver
  • Package: SOIC-8
  • Essence: Reliable and Efficient Communication Interface
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 5V
  • Operating Temperature Range: -40°C to +125°C
  • Data Rate: Up to 1 Mbps
  • Transmit Dominant Timeout: 64 µs
  • Receiver Input Threshold: ±0.2V
  • Standby Current: 10 µA (typical)
  • ESD Protection: ±8 kV HBM

Detailed Pin Configuration

The MCZ33897EFR2 has the following pin configuration:

  1. VBAT: Battery Supply Voltage
  2. GND: Ground
  3. TXD: Transmit Data
  4. RXD: Receive Data
  5. STB: Standby Control
  6. VIO: IO Supply Voltage
  7. CANH: CAN Bus High
  8. CANL: CAN Bus Low

Functional Features

  • High-speed CAN transceiver for automotive applications
  • Compliant with ISO 11898-2 standard
  • Supports data rates up to 1 Mbps
  • Low standby current for power efficiency
  • Built-in ESD protection for enhanced reliability
  • Standby mode for reduced power consumption

Advantages

  • Robust communication interface for automotive electronics
  • Wide operating temperature range for harsh environments
  • Compact SOIC-8 package for space-constrained designs
  • High-speed data transmission for efficient communication
  • Low power consumption for improved energy efficiency

Disadvantages

  • Limited quantity per reel (2500 units)
  • Requires external components for complete system integration
  • Not suitable for non-automotive applications

Working Principles

The MCZ33897EFR2 is a high-speed CAN transceiver designed for automotive electronics. It operates based on the ISO 11898-2 standard, providing a reliable communication interface between different electronic modules in a vehicle. The transceiver supports data rates up to 1 Mbps and features low standby current, making it suitable for power-efficient applications. It incorporates ESD protection to ensure robustness in harsh environments.

Detailed Application Field Plans

The MCZ33897EFR2 is widely used in various automotive applications, including:

  1. Engine Control Units (ECUs)
  2. Body Control Modules (BCMs)
  3. Transmission Control Units (TCUs)
  4. Anti-lock Braking Systems (ABS)
  5. Airbag Control Units (ACUs)
  6. Instrument Clusters
  7. Powertrain Systems
  8. Infotainment Systems

Detailed and Complete Alternative Models

  1. MCZ33897EFR1: Similar to MCZ33897EFR2 with minor differences in specifications.
  2. MCZ33897EFR3: Enhanced version with additional features such as fault detection and diagnostics.
  3. MCZ33897EFR4: Low-power variant with reduced standby current for further energy savings.

Note: Please refer to the respective datasheets for detailed specifications of alternative models.

Word count: 326 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MCZ33897EFR2 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MCZ33897EFR2 in technical solutions:

  1. Q: What is MCZ33897EFR2? A: MCZ33897EFR2 is a high-speed CAN transceiver designed for automotive and industrial applications.

  2. Q: What is the operating voltage range of MCZ33897EFR2? A: The operating voltage range of MCZ33897EFR2 is typically between 4.5V and 5.5V.

  3. Q: What is the maximum data rate supported by MCZ33897EFR2? A: MCZ33897EFR2 supports a maximum data rate of up to 1 Mbps.

  4. Q: Can MCZ33897EFR2 be used in harsh environments? A: Yes, MCZ33897EFR2 is designed to operate reliably in harsh automotive and industrial environments.

  5. Q: Does MCZ33897EFR2 support bus fault protection? A: Yes, MCZ33897EFR2 features built-in bus fault protection, including thermal shutdown and short-circuit protection.

  6. Q: Can MCZ33897EFR2 be used in multi-node networks? A: Yes, MCZ33897EFR2 can be used in multi-node networks, supporting up to 112 nodes on a single bus.

  7. Q: What is the standby current consumption of MCZ33897EFR2? A: The standby current consumption of MCZ33897EFR2 is typically less than 10 µA.

  8. Q: Is MCZ33897EFR2 compatible with other CAN transceivers? A: Yes, MCZ33897EFR2 is fully compatible with other ISO 11898-2 compliant CAN transceivers.

  9. Q: Does MCZ33897EFR2 support wake-up functionality? A: Yes, MCZ33897EFR2 supports wake-up functionality, allowing the device to be activated from a low-power sleep mode.

  10. Q: What is the recommended operating temperature range for MCZ33897EFR2? A: The recommended operating temperature range for MCZ33897EFR2 is typically between -40°C and +125°C.

Please note that these answers are general and may vary depending on the specific application and requirements.