Nuvoton Technology Corporation of America
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
W83176G-732
Lihat Detail Lembar Data

W83176G-732

Basic Information Overview

  • Category: Electronic Component
  • Use: Integrated Circuit
  • Characteristics: High-performance, Low-power consumption
  • Package: SOP-8
  • Essence: Microcontroller
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications and Parameters

  • Supply Voltage: 3.3V
  • Operating Temperature: -40°C to +85°C
  • Clock Frequency: 16 MHz
  • Flash Memory: 128 KB
  • RAM: 8 KB
  • I/O Pins: 14
  • Communication Interfaces: SPI, I2C, UART

Detailed and Complete Pin Configuration

  1. VDD (Power Supply)
  2. GND (Ground)
  3. RESET (Reset Pin)
  4. XTAL1 (External Crystal Oscillator Input)
  5. XTAL2 (External Crystal Oscillator Output)
  6. SDA (I2C Data Line)
  7. SCL (I2C Clock Line)
  8. RXD (UART Receive Data)
  9. TXD (UART Transmit Data)
  10. MOSI (SPI Master Out Slave In)
  11. MISO (SPI Master In Slave Out)
  12. SCK (SPI Serial Clock)
  13. CS (Chip Select)
  14. INT (Interrupt Pin)

Functional Characteristics

  • High processing speed and performance
  • Low power consumption for energy efficiency
  • Support for multiple communication interfaces
  • Built-in flash memory for program storage
  • Interrupt capability for event-driven programming
  • Flexible I/O pins for versatile connectivity

Advantages and Disadvantages

Advantages: - High-performance microcontroller - Low power consumption - Versatile communication interfaces - Ample program storage capacity - Interrupt capability for efficient event handling

Disadvantages: - Limited number of I/O pins - Requires external crystal oscillator for clock input

Applicable Range of Products

  • Consumer Electronics
  • Industrial Automation
  • Internet of Things (IoT) Devices
  • Automotive Electronics
  • Medical Equipment

Working Principles

The W83176G-732 is a microcontroller that operates based on the instructions stored in its flash memory. It executes these instructions to perform various tasks and control external devices. The microcontroller communicates with other components through its I/O pins and supports different communication protocols such as SPI, I2C, and UART.

Detailed Application Field Plans

  1. Consumer Electronics: Used in smart home systems for controlling appliances and devices.
  2. Industrial Automation: Applied in industrial control systems for monitoring and controlling machinery.
  3. Internet of Things (IoT) Devices: Utilized in IoT devices for data collection, processing, and communication.
  4. Automotive Electronics: Integrated into automotive systems for vehicle control and diagnostics.
  5. Medical Equipment: Employed in medical devices for data acquisition and patient monitoring.

Detailed Alternative Models

  1. W83176G-731: Similar specifications but with higher flash memory capacity.
  2. W83176G-733: Similar specifications but with additional analog input channels.
  3. W83176G-734: Similar specifications but with extended temperature range.

5 Common Technical Questions and Answers

  1. Q: What is the maximum clock frequency supported by W83176G-732? A: The maximum clock frequency is 16 MHz.

  2. Q: How many I/O pins does W83176G-732 have? A: It has 14 I/O pins.

  3. Q: Can I use both SPI and I2C interfaces simultaneously? A: Yes, the microcontroller supports multiple communication interfaces concurrently.

  4. Q: What is the operating voltage range for W83176G-732? A: The operating voltage range is 3.3V.

  5. Q: Does W83176G-732 have built-in memory for program storage? A: Yes, it has 128 KB of flash memory for program storage.

This concludes the encyclopedia entry for W83176G-732.