Nuvoton Technology Corporation of America
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
W78E051DDG
Lihat Detail Lembar Data

W78E051DDG

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High-performance, low-power consumption
  • Package: Dual in-line package (DIP)
  • Essence: Integrated circuit for controlling and managing electronic devices
  • Packaging/Quantity: Bulk packaging, typically sold in reels or tubes

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 20 MHz
  • Program Memory Size: 8 KB
  • RAM Size: 256 bytes
  • I/O Pins: 32
  • Timers/Counters: 3
  • Communication Interfaces: UART, SPI, I2C
  • Operating Voltage: 2.4V - 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The W78E051DDG microcontroller has a total of 40 pins. The pin configuration is as follows:

  1. VSS: Ground
  2. P0.0: General-purpose I/O pin
  3. P0.1: General-purpose I/O pin
  4. P0.2: General-purpose I/O pin
  5. P0.3: General-purpose I/O pin
  6. P0.4: General-purpose I/O pin
  7. P0.5: General-purpose I/O pin
  8. P0.6: General-purpose I/O pin
  9. P0.7: General-purpose I/O pin
  10. RST: Reset pin
  11. XTAL1: Crystal oscillator input
  12. XTAL2: Crystal oscillator output
  13. PSEN: Program store enable
  14. ALE/PROG: Address latch enable/Program pulse input
  15. EA/VPP: External access enable/Voltage programming pin
  16. P2.0: General-purpose I/O pin
  17. P2.1: General-purpose I/O pin
  18. P2.2: General-purpose I/O pin
  19. P2.3: General-purpose I/O pin
  20. P2.4: General-purpose I/O pin
  21. P2.5: General-purpose I/O pin
  22. P2.6: General-purpose I/O pin
  23. P2.7: General-purpose I/O pin
  24. ALE/PROG: Address latch enable/Program pulse input
  25. PSEN: Program store enable
  26. P3.0/RXD: General-purpose I/O pin/Serial receive data
  27. P3.1/TXD: General-purpose I/O pin/Serial transmit data
  28. P3.2/INT0: General-purpose I/O pin/External interrupt 0
  29. P3.3/INT1: General-purpose I/O pin/External interrupt 1
  30. P3.4/T0: General-purpose I/O pin/Timer 0 external input
  31. P3.5/T1: General-purpose I/O pin/Timer 1 external input
  32. P3.6/WR: General-purpose I/O pin/Write control for external memory
  33. P3.7/RD: General-purpose I/O pin/Read control for external memory
  34. VCC: Power supply

Functional Features

  • High-performance 8-bit microcontroller suitable for various embedded applications
  • Low-power consumption for energy-efficient designs
  • Wide operating voltage range allows flexibility in power supply options
  • Multiple communication interfaces (UART, SPI, I2C) for easy integration with other devices
  • Built-in timers/counters for precise timing and event management
  • Extensive I/O capabilities with 32 pins for interfacing with external components
  • Supports external memory for expanded storage requirements

Advantages and Disadvantages

Advantages: - High-performance and low-power consumption make it suitable for battery-powered devices - Wide operating voltage range allows compatibility with different power sources - Multiple communication interfaces enable easy connectivity with other devices - Ample I/O pins provide flexibility in interfacing with external components - Built-in timers/counters facilitate accurate timing and event management

Disadvantages: - Limited program memory size (8 KB) may restrict the complexity of applications - Relatively small RAM size (256 bytes) may limit data storage capabilities - Lack of built-in peripherals, such as ADC or DAC, may require additional external components for certain applications

Working Principles

The W78E051DDG microcontroller operates based on an 8-bit architecture. It executes instructions stored in its program memory to perform various tasks. The CPU speed can reach up to 20 MHz, allowing for fast and efficient processing. The microcontroller communicates with external devices through its I/O pins and supports multiple communication protocols like UART, SPI, and I2C.

Detailed Application Field Plans

The W

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan W78E051DDG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of W78E051DDG in technical solutions:

  1. Q: What is the W78E051DDG microcontroller used for? A: The W78E051DDG is a microcontroller commonly used in various technical solutions, such as industrial automation, consumer electronics, and embedded systems.

  2. Q: What is the maximum clock frequency supported by the W78E051DDG? A: The W78E051DDG supports a maximum clock frequency of 24 MHz.

  3. Q: How much program memory does the W78E051DDG have? A: The W78E051DDG has 8 KB of on-chip program memory.

  4. Q: Can I expand the program memory of the W78E051DDG? A: No, the W78E051DDG does not support external program memory expansion.

  5. Q: How many I/O pins does the W78E051DDG have? A: The W78E051DDG has a total of 32 I/O pins.

  6. Q: Does the W78E051DDG support analog-to-digital conversion (ADC)? A: No, the W78E051DDG does not have an integrated ADC.

  7. Q: What communication interfaces are supported by the W78E051DDG? A: The W78E051DDG supports UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface) communication interfaces.

  8. Q: Can I use the W78E051DDG for real-time applications? A: Yes, the W78E051DDG has built-in timers and interrupt capabilities that make it suitable for real-time applications.

  9. Q: What is the operating voltage range of the W78E051DDG? A: The W78E051DDG operates within a voltage range of 2.4V to 5.5V.

  10. Q: Is the W78E051DDG programmable in C language? A: Yes, the W78E051DDG can be programmed using C language with the appropriate development tools and compilers.

Please note that these answers are based on general information about the W78E051DDG microcontroller. It's always recommended to refer to the official datasheet and documentation for accurate and detailed specifications.