NJU8713V-TE1

Product Overview

Category

NJU8713V-TE1 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for various applications, such as audio systems, communication devices, and consumer electronics.

Characteristics

• High-performance integrated circuit
• Compact size
• Low power consumption
• Wide operating voltage range

Package

NJU8713V-TE1 is available in a small outline package (SOP) with a specified pin configuration.

Essence

The essence of NJU8713V-TE1 lies in its ability to provide efficient signal processing and amplification for audio and communication systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Operating Voltage: 2.7V - 5.5V
• Operating Temperature Range: -40°C to +85°C
• Output Power: 1W (at 5V, 10% THD+N, 8Ω load)
• Total Harmonic Distortion + Noise (THD+N): 0.1% (typical)
• Signal-to-Noise Ratio (SNR): 90dB (typical)
• Gain: 20dB (fixed)

Detailed Pin Configuration

1. VDD: Power supply input
2. GND: Ground reference
3. IN+: Positive input terminal
4. IN-: Negative input terminal
5. OUT: Amplified output
6. BYP: Bypass capacitor connection

Functional Features

• Single-ended input and bridge-tied load (BTL) output configuration
• Built-in mute function
• Short-circuit protection
• Thermal shutdown protection
• Low quiescent current

Advantages and Disadvantages

Advantages

• High-quality audio amplification
• Compact size for space-constrained applications
• Low power consumption for energy efficiency
• Wide operating voltage range for versatility

Disadvantages

• Limited output power compared to higher wattage amplifiers
• Fixed gain may not be suitable for all applications requiring variable gain control

Working Principles

NJU8713V-TE1 operates on the principle of amplifying input audio signals using a bridge-tied load configuration. It utilizes internal circuitry to process and amplify the signals, providing an amplified output with low distortion and high fidelity.

Detailed Application Field Plans

NJU8713V-TE1 finds application in various electronic devices, including: - Portable audio players - Bluetooth speakers - Headphone amplifiers - Intercom systems - Automotive audio systems

Detailed and Complete Alternative Models

• NJU8712V-TE1: Similar specifications and features, but with lower output power (0.5W)
• NJU8714V-TE1: Higher output power (2W) with similar characteristics and pin configuration
• NJU8715V-TE1: Variable gain control option added to the NJU8713V-TE1 features

(Note: These alternative models are part of the same product series and share many similarities with NJU8713V-TE1.)

In conclusion, NJU8713V-TE1 is a high-performance integrated circuit commonly used for audio and communication applications. Its compact size, low power consumption, and wide operating voltage range make it suitable for various electronic devices. While it offers advantages such as high-quality audio amplification, it has limitations in terms of output power and fixed gain. Nonetheless, its functional features, working principles, and detailed application field plans make it a valuable component in the electronics industry.