Nexperia USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PMV45EN2R
Lihat Detail Lembar Data

PMV45EN2R

Product Overview

Belongs to: Electronic Components
Category: Power MOSFET
Use: Switching applications
Characteristics: High voltage, low on-resistance
Package: TO-220AB
Essence: Power management
Packaging/Quantity: Single unit

Specifications

  • Voltage Rating: 450V
  • Current Rating: 41A
  • On-Resistance: 0.09 ohms
  • Gate Charge: 40nC
  • Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • High voltage capability
  • Low gate charge
  • Fast switching speed
  • Low on-resistance

Advantages and Disadvantages

Advantages: - Suitable for high voltage applications - Low power dissipation - Fast switching times

Disadvantages: - Sensitive to static electricity - Higher cost compared to lower voltage MOSFETs

Working Principles

The PMV45EN2R operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

  1. Switched-Mode Power Supplies: Utilized in high-voltage power supply circuits due to its high voltage rating and low on-resistance.
  2. Motor Control: Used in motor drive circuits for controlling high-power motors efficiently.
  3. Inverters: Employed in DC to AC converter circuits for various industrial and consumer applications.

Detailed and Complete Alternative Models

  1. IRF840: Similar voltage and current ratings, different package (TO-220)
  2. STP55NF06: Comparable specifications, different manufacturer (STMicroelectronics)
  3. IXFH41N50: Higher voltage rating, similar current rating, different package (TO-247)

This completes the entry for PMV45EN2R, covering its product details, specifications, features, and application areas.

Word Count: 275

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PMV45EN2R dalam solusi teknis

Sure, here are 10 common questions and answers related to the application of PMV45EN2R in technical solutions:

  1. What is PMV45EN2R?

    • PMV45EN2R is a high-performance pressure sensor designed for use in various technical applications.

  2. What is the operating voltage range of PMV45EN2R?

    • The operating voltage range of PMV45EN2R is typically between 4.75V and 5.25V.

  3. What is the pressure range that PMV45EN2R can measure?

    • PMV45EN2R can measure pressure within the range of 0 to 45 psi.

  4. What is the output signal format of PMV45EN2R?

    • PMV45EN2R provides a digital output signal in I2C format.

  5. Is PMV45EN2R suitable for harsh environments?

    • Yes, PMV45EN2R is designed to be robust and can withstand harsh environmental conditions.

  6. Can PMV45EN2R be used in medical devices?

    • Yes, PMV45EN2R can be integrated into medical devices for pressure monitoring applications.

  7. What is the accuracy of PMV45EN2R?

    • PMV45EN2R offers high accuracy with typical error margins of less than 1% of the full-scale range.

  8. Does PMV45EN2R require calibration before use?

    • PMV45EN2R is factory calibrated, but it may benefit from periodic recalibration to maintain accuracy.

  9. Can PMV45EN2R be used in automotive applications?

    • Yes, PMV45EN2R is suitable for automotive applications such as tire pressure monitoring systems.

  10. What is the temperature range within which PMV45EN2R operates?

    • PMV45EN2R can operate within a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.

I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.