Nexperia USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PDTA123EU,115
Lihat Detail Lembar Data

PDTA123EU,115

Product Overview

  • Belongs to: Semiconductor category
  • Use: Transistor for amplification and switching applications
  • Characteristics: Small package, high current capability, low voltage drop
  • Package: SOT416 (SC-75)
  • Essence: NPN bipolar junction transistor
  • Packaging/Quantity: Reel, 3000 units

Specifications

  • Collector-Base Voltage (VCBO): 50V
  • Collector-Emitter Voltage (VCEO): 50V
  • Emitter-Base Voltage (VEBO): 5V
  • Continuous Collector Current (IC): 100mA
  • Power Dissipation (Ptot): 200mW
  • Transition Frequency (fT): 250MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages

  • Small package size
  • Suitable for high-density PCB designs
  • Low power consumption

Disadvantages

  • Limited maximum current and voltage ratings
  • Sensitive to temperature variations

Working Principles

The PDTA123EU,115 is a NPN bipolar junction transistor that operates by controlling the flow of current between its collector and emitter terminals using the base terminal. When a small current is applied to the base, it allows a larger current to flow from the collector to the emitter, enabling amplification and switching functions.

Detailed Application Field Plans

The PDTA123EU,115 is commonly used in audio amplifiers, signal processing circuits, and low-power switching applications. Its small package and low power dissipation make it suitable for portable electronic devices and battery-powered systems.

Detailed and Complete Alternative Models

  • BC847C,215
  • BCP56,115
  • MMBT2222ALT1G

This comprehensive entry provides an in-depth understanding of the PDTA123EU,115, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PDTA123EU,115 dalam solusi teknis

  1. What is PDTA123EU,115?

    • PDTA123EU,115 is a small signal NPN transistor used in various technical solutions for amplification and switching purposes.

  2. What are the typical applications of PDTA123EU,115?

    • PDTA123EU,115 is commonly used in audio amplifiers, signal processing circuits, and general purpose switching applications.

  3. What are the electrical characteristics of PDTA123EU,115?

    • The electrical characteristics include a maximum collector current of 100mA, a maximum collector-base voltage of 50V, and a maximum power dissipation of 200mW.

  4. How do I properly bias PDTA123EU,115 in an amplifier circuit?

    • Proper biasing involves setting the base voltage to ensure the transistor operates within its linear region for amplification without entering saturation or cutoff.

  5. Can PDTA123EU,115 be used in high-frequency applications?

    • While it can be used in moderate frequency applications, it may not be suitable for very high-frequency designs due to its transition frequency and capacitance characteristics.

  6. What are the recommended operating conditions for PDTA123EU,115?

    • It is recommended to operate PDTA123EU,115 within a temperature range of -55°C to 150°C and to stay within the specified voltage and current limits.

  7. How do I select appropriate biasing resistors for PDTA123EU,115?

    • The selection of biasing resistors depends on the desired operating point and the specific circuit requirements. Calculations based on the transistor's datasheet can help determine suitable values.

  8. Are there any common failure modes associated with PDTA123EU,115?

    • Common failure modes include thermal runaway due to excessive heat buildup, as well as overvoltage or overcurrent conditions leading to breakdown.

  9. Can PDTA123EU,115 be used in low-power battery-operated devices?

    • Yes, PDTA123EU,115's low power dissipation makes it suitable for use in low-power applications such as portable electronics.

  10. Where can I find detailed application notes for using PDTA123EU,115 in technical solutions?

    • Detailed application notes can often be found in the manufacturer's datasheet, as well as in technical reference books and online resources related to transistor circuit design.