Nexperia USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
NX3008PBKW,115
Lihat Detail Lembar Data

NX3008PBKW,115

Product Overview

  • Belongs to: Integrated Circuits (ICs)
  • Category: Power Management ICs
  • Use: Voltage Regulator
  • Characteristics: High efficiency, compact design, low power consumption
  • Package: DSBGA-6
  • Essence: Regulates voltage for electronic devices
  • Packaging/Quantity: Tape & Reel (3000 units)

Specifications

  • Input Voltage: 2.7V to 5.5V
  • Output Voltage: 0.6V to 3.3V
  • Output Current: 3A
  • Switching Frequency: 2.1MHz
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: VIN
  • Pin 2: GND
  • Pin 3: EN
  • Pin 4: FB
  • Pin 5: SW
  • Pin 6: VOUT

Functional Features

  • High efficiency synchronous buck regulator
  • Integrated power MOSFET switches
  • Overcurrent and thermal protection
  • Power good output indicator

Advantages

  • Compact size for space-constrained applications
  • Wide input voltage range
  • High efficiency for extended battery life
  • Integrated protection features for reliability

Disadvantages

  • Limited output current compared to some alternatives
  • Higher cost compared to non-integrated solutions

Working Principles

The NX3008PBKW,115 is a synchronous buck regulator that efficiently converts input voltage to a lower, regulated output voltage. It utilizes integrated power MOSFET switches to minimize external component count and reduce power losses.

Detailed Application Field Plans

  • Portable electronic devices
  • Battery-powered systems
  • IoT devices
  • Wearable technology
  • Industrial automation

Detailed and Complete Alternative Models

  • LM2675M-ADJ/NOPB
  • TPS54360DDAR
  • MP2315GJ-Z

This comprehensive entry provides an in-depth understanding of the NX3008PBKW,115, covering its specifications, features, advantages, and application fields, as well as alternative models for comparison.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan NX3008PBKW,115 dalam solusi teknis

Sure, here are 10 common questions and answers related to the application of NX3008PBKW,115 in technical solutions:

  1. What is the maximum voltage rating for NX3008PBKW,115?

    • The maximum voltage rating for NX3008PBKW,115 is typically 30V.

  2. What is the maximum current rating for NX3008PBKW,115?

    • The maximum continuous drain current rating for NX3008PBKW,115 is typically 8A.

  3. Can NX3008PBKW,115 be used in automotive applications?

    • Yes, NX3008PBKW,115 is suitable for use in automotive applications, such as power distribution and motor control.

  4. What is the typical on-resistance for NX3008PBKW,115?

    • The typical on-resistance for NX3008PBKW,115 is around 20mΩ.

  5. Is NX3008PBKW,115 suitable for use in battery management systems?

    • Yes, NX3008PBKW,115 can be used in battery management systems for applications such as load switching and protection.

  6. What is the operating temperature range for NX3008PBKW,115?

    • The operating temperature range for NX3008PBKW,115 is typically -55°C to 150°C.

  7. Can NX3008PBKW,115 be used in industrial automation equipment?

    • Yes, NX3008PBKW,115 is suitable for use in industrial automation equipment for tasks like relay and solenoid driving.

  8. Does NX3008PBKW,115 have built-in overcurrent protection?

    • No, NX3008PBKW,115 does not have built-in overcurrent protection and may require external circuitry for protection.

  9. What package type is NX3008PBKW,115 available in?

    • NX3008PBKW,115 is available in a PowerPAK® SO-8 package.

  10. Can NX3008PBKW,115 be used in power supply applications?

    • Yes, NX3008PBKW,115 can be used in power supply applications for tasks such as load switching and DC-DC conversion.

I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.