74LVC1G07GW-Q100H

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Logic Gate Buffer/Driver
• Characteristics:
  • Low-voltage CMOS technology
  • High-speed operation
  • Wide operating voltage range
  • Small package size
• Package: SOT-353 (SC-88A)
• Essence: Single Buffer/Driver with Open-Drain Output
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 400 MHz
• Propagation Delay: 3.8 ns (typical)
• Output Drive Capability: ±24 mA
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The 74LVC1G07GW-Q100H has a total of 5 pins: 1. GND (Ground) 2. A (Input) 3. Y (Output) 4. VCC (Power Supply) 5. NC (No Connection)

Functional Features

• Single buffer/driver with open-drain output
• Provides level shifting and signal buffering capabilities
• Allows bidirectional communication between devices with different voltage levels
• Supports voltage translation between 1.8V, 2.5V, 3.3V, and 5V systems
• Enables interfacing between low-voltage microcontrollers and higher voltage peripherals

Advantages and Disadvantages

Advantages: - Low-voltage operation allows for compatibility with various systems - High-speed operation enables efficient data transfer - Small package size saves board space - Wide operating voltage range provides flexibility in system design

Disadvantages: - Limited output drive capability may not be suitable for high-current applications - Open-drain output requires external pull-up resistor for proper operation

Working Principles

The 74LVC1G07GW-Q100H is based on low-voltage CMOS technology. It functions as a buffer/driver with an open-drain output. When the input signal is high, the output is in a high-impedance state (disconnected). When the input signal is low, the output is pulled to ground through an internal transistor. The open-drain configuration allows for bidirectional communication and level shifting between devices with different voltage levels.

Detailed Application Field Plans

The 74LVC1G07GW-Q100H is commonly used in various applications, including: - Interface level translation between microcontrollers and peripherals - I2C bus communication - General-purpose logic level conversion - Voltage level shifting in battery-powered devices - Signal buffering in communication systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as replacements for the 74LVC1G07GW-Q100H are: - SN74LVC1G07DBVR - MC74VHC1GT07DTT1G - TC7SZ07FU

These alternatives offer similar functionality and characteristics, providing options for different design requirements.

Word count: 346 words