Nexperia USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
74LVC163PW,118
Lihat Detail Lembar Data

74LVC163PW,118

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Counter/Divider
  • Characteristics: Low-voltage CMOS device, high-speed operation, low power consumption
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: 4-bit synchronous binary counter with asynchronous reset
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: -0.5V to VCC + 0.5V
  • Operating Temperature Range: -40°C to +125°C
  • Maximum Clock Frequency: 200MHz

Detailed Pin Configuration

The 74LVC163PW,118 IC has a total of 16 pins. The pin configuration is as follows:

  1. CLK (Clock Input)
  2. MR (Master Reset Input)
  3. CP (Parallel Load Input)
  4. D0 (Data Input 0)
  5. D1 (Data Input 1)
  6. D2 (Data Input 2)
  7. D3 (Data Input 3)
  8. Q0 (Output 0)
  9. Q1 (Output 1)
  10. Q2 (Output 2)
  11. Q3 (Output 3)
  12. GND (Ground)
  13. QD (Down Counter Output)
  14. PE (Parallel Enable Input)
  15. VCC (Supply Voltage)
  16. QA (Carry Output)

Functional Features

  • Synchronous counting operation
  • Asynchronous master reset
  • Parallel load capability
  • Carry output for cascading multiple counters
  • Low propagation delay
  • High noise immunity
  • Power-down protection

Advantages and Disadvantages

Advantages: - Low-voltage operation allows for compatibility with a wide range of systems - High-speed operation enables efficient counting and dividing tasks - Low power consumption helps in reducing overall energy usage - Small package size saves board space

Disadvantages: - Limited maximum clock frequency compared to some other counter ICs - Lack of built-in error detection or correction mechanisms

Working Principles

The 74LVC163PW,118 is a synchronous binary counter that counts up or down based on the clock input. The counter can be reset asynchronously using the master reset input. It also has a parallel load capability, allowing the user to load a specific count value into the counter.

The counter operates by incrementing or decrementing its internal count value on each rising edge of the clock signal. The outputs represent the binary representation of the count value. The carry output can be used to cascade multiple counters for higher bit-count applications.

Detailed Application Field Plans

The 74LVC163PW,118 is commonly used in various applications, including: - Frequency division in digital communication systems - Event counting in industrial automation - Timekeeping circuits in electronic devices - Address generation in memory systems - Control circuitry in microcontrollers

Detailed and Complete Alternative Models

Some alternative models to the 74LVC163PW,118 include: - CD40163BE: CMOS presettable synchronous 4-bit binary counter - SN74LS163AN: Synchronous 4-bit binary counter with asynchronous clear - MC14516BCL: Presettable synchronous 4-bit binary up/down counter

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Word Count: 346 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 74LVC163PW,118 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of 74LVC163PW,118 in technical solutions:

  1. Q: What is the function of the 74LVC163PW,118? A: The 74LVC163PW,118 is a 4-bit synchronous binary counter that can be used for various applications such as frequency division, event counting, and time delay generation.

  2. Q: What is the operating voltage range of the 74LVC163PW,118? A: The 74LVC163PW,118 operates within a voltage range of 1.65V to 5.5V.

  3. Q: How many outputs does the 74LVC163PW,118 have? A: The 74LVC163PW,118 has four outputs (Q0, Q1, Q2, and Q3) representing the binary count.

  4. Q: Can the 74LVC163PW,118 be cascaded to increase the number of bits? A: Yes, multiple 74LVC163PW,118 counters can be cascaded to increase the number of bits in the counter.

  5. Q: What is the maximum clock frequency supported by the 74LVC163PW,118? A: The 74LVC163PW,118 can operate at a maximum clock frequency of 125 MHz.

  6. Q: Does the 74LVC163PW,118 have an asynchronous reset feature? A: No, the 74LVC163PW,118 does not have an asynchronous reset. It only supports synchronous reset.

  7. Q: What is the power supply current consumption of the 74LVC163PW,118? A: The power supply current consumption of the 74LVC163PW,118 is typically around 2.5 mA.

  8. Q: Can the 74LVC163PW,118 be used in both CMOS and TTL logic systems? A: Yes, the 74LVC163PW,118 is compatible with both CMOS and TTL logic levels.

  9. Q: Does the 74LVC163PW,118 have any built-in error detection or correction features? A: No, the 74LVC163PW,118 does not have any built-in error detection or correction features. It is a basic binary counter.

  10. Q: What package options are available for the 74LVC163PW,118? A: The 74LVC163PW,118 is available in various package options such as TSSOP-16 and DHVQFN16.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications of the 74LVC163PW,118.