Lihat spesifikasi untuk detail produk.
Encyclopedia Entry: 74AHCT240D,112
Product Overview
Category
The 74AHCT240D,112 belongs to the category of integrated circuits (ICs), specifically a type of octal buffer/line driver.
Use
This IC is commonly used in digital systems for signal buffering and line driving applications. It provides high-speed, non-inverting buffers with 3-state outputs, making it suitable for various digital logic designs.
Characteristics
- High-speed operation: The 74AHCT240D,112 offers fast switching times, allowing for efficient data transfer.
- Non-inverting buffers: It maintains the input logic state at the output, ensuring accurate signal propagation.
- 3-state outputs: The IC supports three output states - high impedance, logic high, and logic low - providing flexibility in bus-oriented applications.
- Wide supply voltage range: It can operate within a voltage range of 4.5V to 5.5V, making it compatible with standard digital systems.
- Low power consumption: The IC is designed to minimize power consumption, enhancing energy efficiency.
Package and Quantity
The 74AHCT240D,112 is available in a small-outline integrated circuit (SOIC) package. It typically comes in reels or tubes, with a quantity of 2500 units per reel.
Specifications
- Supply Voltage Range: 4.5V to 5.5V
- Input Voltage Range: 0V to VCC
- Output Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +125°C
- Input Capacitance: 3.5pF (typical)
- Output Capacitance: 6pF (typical)
- Propagation Delay Time: 7ns (typical)
- Output Current: ±8mA
Pin Configuration
The 74AHCT240D,112 IC has a total of 20 pins. The pin configuration is as follows:
+---\/---+
A1 -|1 20|- VCC
A2 -|2 19|- B1
A3 -|3 18|- B2
A4 -|4 17|- B3
A5 -|5 16|- B4
A6 -|6 15|- B5
A7 -|7 14|- B6
A8 -|8 13|- B7
GND -|9 12|- B8
OE -|10 11|- Y
+-------+
Functional Features
- Octal Buffer/Line Driver: The 74AHCT240D,112 provides eight independent buffer circuits, each capable of driving one line.
- 3-State Outputs: The outputs can be put into a high impedance state using the Output Enable (OE) pin, allowing multiple devices to share a common bus without interference.
- Non-Inverting Operation: The IC maintains the logic state of the input signal at the output, ensuring accurate data transmission.
Advantages and Disadvantages
Advantages
- High-speed operation enables efficient data transfer.
- Non-inverting buffers preserve signal integrity.
- 3-state outputs provide flexibility in bus-oriented applications.
- Wide supply voltage range allows compatibility with standard digital systems.
- Low power consumption enhances energy efficiency.
Disadvantages
- Limited number of buffer circuits (eight), which may not be sufficient for complex designs requiring more lines.
- Requires external pull-up or pull-down resistors for proper operation in certain configurations.
Working Principles
The 74AHCT240D,112 operates by receiving digital input signals on the A1-A8 pins. These inputs are buffered and non-inverted, maintaining the logic state at the corresponding outputs (B1-B8). The Output Enable (OE) pin controls the output state, allowing the outputs to be either active or in a high impedance state.
Application Field Plans
The 74AHCT240D,112 finds applications in various digital systems, including but not limited to: - Microprocessor-based systems - Data communication systems - Memory interfaces - Industrial control systems - Automotive electronics
Alternative Models
Several alternative models with similar functionality are available in the market. Some notable alternatives to the 74AHCT240D,112 include: - SN74HCT240N by Texas Instruments - MC74HCT240AN by ON Semiconductor - CD74HCT240E by Texas Instruments - 74HCT240 by NXP Semiconductors
These alternatives offer comparable features and can be considered based on specific design requirements.
In conclusion, the 74AHCT240D,112 is a versatile octal buffer/line driver IC widely used in digital systems. Its high
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 74AHCT240D,112 dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of 74AHCT240D,112 in technical solutions:
Q: What is the function of the 74AHCT240D,112? A: The 74AHCT240D,112 is an octal inverting buffer/line driver with 3-state outputs.
Q: What is the voltage supply range for the 74AHCT240D,112? A: The voltage supply range is typically between 4.5V and 5.5V.
Q: How many inputs and outputs does the 74AHCT240D,112 have? A: It has 8 inputs and 8 outputs.
Q: Can the 74AHCT240D,112 be used for level shifting? A: Yes, it can be used for level shifting as it supports both TTL and CMOS logic levels.
Q: What is the maximum output current that the 74AHCT240D,112 can drive? A: The maximum output current is typically 8mA.
Q: Does the 74AHCT240D,112 have internal pull-up or pull-down resistors? A: No, it does not have internal pull-up or pull-down resistors.
Q: Can the 74AHCT240D,112 be used in high-speed applications? A: Yes, it is designed for high-speed operation and has a typical propagation delay of 9 ns.
Q: Is the 74AHCT240D,112 compatible with other logic families? A: Yes, it is compatible with most TTL and CMOS logic families.
Q: Can the 74AHCT240D,112 be used for bidirectional communication? A: No, it is a unidirectional buffer and does not support bidirectional communication.
Q: What is the package type of the 74AHCT240D,112? A: It is available in various package types, such as SOIC, TSSOP, and SSOP.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the 74AHCT240D,112.