Nexperia USA Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
2PC4081S,135
Lihat Detail Lembar Data

2PC4081S,135

Product Information Overview

  • Category: Integrated Circuit
  • Use: Amplifier
  • Characteristics: High gain, low power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Operational Amplifier
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

The 2PC4081S,135 is a quad operational amplifier with a wide operating voltage range of ±22V. It has a high open-loop gain and low input bias current, making it suitable for various applications.

Detailed Pin Configuration

The 2PC4081S,135 features a standard pin configuration for a quad operational amplifier, with four amplifiers in a single package. Each amplifier has its non-inverting input (pin 3), inverting input (pin 2), output (pin 6), and power supply pins (pins 4 and 11).

Functional Features

This operational amplifier provides high gain, low offset voltage, and low noise, making it ideal for precision signal conditioning and instrumentation applications. It also offers good stability and high common-mode rejection ratio.

Advantages and Disadvantages

Advantages: - High gain - Low power consumption - Wide operating voltage range

Disadvantages: - Limited bandwidth compared to some newer models - Sensitive to electrostatic discharge

Working Principles

The 2PC4081S,135 operates based on the principles of differential input and single-ended output. It amplifies the difference between the two input voltages while rejecting any common-mode signals.

Detailed Application Field Plans

This operational amplifier is commonly used in audio preamplifiers, active filters, and precision signal conditioning circuits. It is also suitable for use in industrial control systems and sensor interfaces due to its high precision and low noise characteristics.

Detailed and Complete Alternative Models

  • LM324: A widely used quad operational amplifier with similar specifications
  • TL084: Another quad operational amplifier known for its low noise and high slew rate

In conclusion, the 2PC4081S,135 is a versatile quad operational amplifier with high gain and low power consumption, making it suitable for a wide range of precision signal processing applications.

[Word count: 298]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 2PC4081S,135 dalam solusi teknis

  1. What is the 2PC4081S,135 used for?

    • The 2PC4081S,135 is a dual N-channel enhancement mode Field-Effect Transistor (FET) used for various switching applications in technical solutions.

  2. What are the key features of the 2PC4081S,135?

    • The key features include low on-state resistance, fast switching speed, low gate charge, and high ruggedness.

  3. What is the maximum drain-source voltage of the 2PC4081S,135?

    • The maximum drain-source voltage is typically around 20V.

  4. What is the typical drain current of the 2PC4081S,135?

    • The typical drain current ranges from a few milliamps to several amps, depending on the application and operating conditions.

  5. Can the 2PC4081S,135 be used for PWM (Pulse Width Modulation) applications?

    • Yes, the 2PC4081S,135 can be used for PWM applications due to its fast switching speed and low gate charge.

  6. What are the recommended operating temperature range for the 2PC4081S,135?

    • The recommended operating temperature range is typically between -55°C to 150°C.

  7. Is the 2PC4081S,135 suitable for battery-powered applications?

    • Yes, the 2PC4081S,135 is suitable for battery-powered applications due to its low on-state resistance and efficient switching characteristics.

  8. Does the 2PC4081S,135 require a heat sink for high-power applications?

    • For high-power applications, it is recommended to use a heat sink to ensure proper thermal management and reliability.

  9. Can the 2PC4081S,135 be used in automotive electronics?

    • Yes, the 2PC4081S,135 can be used in automotive electronics due to its ruggedness and ability to operate in harsh environments.

  10. Are there any specific ESD (Electrostatic Discharge) protection considerations for using the 2PC4081S,135?

    • It is recommended to follow standard ESD protection practices when handling and integrating the 2PC4081S,135 into electronic circuits to prevent damage from electrostatic discharge.