MPQ5073GG-AEC1-P

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: QFN (Quad Flat No-Lead)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel / 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 0.6V to 3.3V
• Output Current: Up to 3A
• Efficiency: Up to 95%
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MPQ5073GG-AEC1-P has a total of 16 pins. The pin configuration is as follows:

1. VIN: Input Voltage
2. EN: Enable Pin
3. FB: Feedback Pin
4. GND: Ground
5. PGND: Power Ground
6. SW: Switching Node
7. LX: Inductor Connection
8. VOUT: Output Voltage
9. COMP: Compensation Pin
10. SS: Soft-Start Pin
11. BST: Bootstrap Pin
12. AGND: Analog Ground
13. NC: No Connection
14. NC: No Connection
15. NC: No Connection
16. VCC: Supply Voltage

Functional Features

• High Efficiency: The MPQ5073GG-AEC1-P offers high efficiency, ensuring minimal power loss during voltage regulation.
• Low Power Consumption: This IC consumes low power, making it suitable for battery-powered devices.
• Wide Input Voltage Range: It can accept input voltages ranging from 2.7V to 5.5V, providing flexibility in various applications.
• Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to 3.3V, allowing customization based on specific requirements.
• Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the circuit and connected devices.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Wide input voltage range allows for versatile applications. - Adjustable output voltage provides flexibility. - Overcurrent protection ensures safety.

Disadvantages: - Limited output current capacity (up to 3A). - Requires external components for proper operation.

Working Principles

The MPQ5073GG-AEC1-P is a voltage regulator that converts an input voltage into a stable output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first regulated and then stepped down to the desired output voltage using an inductor and capacitors. The feedback mechanism continuously monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output.

Detailed Application Field Plans

The MPQ5073GG-AEC1-P is commonly used in various applications, including:

1. Portable Electronic Devices: It is suitable for powering smartphones, tablets, portable media players, and other battery-powered devices.
2. IoT Devices: The IC can be utilized in Internet of Things (IoT) devices such as smart home sensors, wearable devices, and wireless communication modules.
3. Industrial Equipment: It finds application in industrial automation systems, motor control circuits, and power supplies for industrial machinery.
4. Automotive Electronics: The IC can be employed in automotive applications like infotainment systems, lighting control, and engine management systems.

Detailed and Complete Alternative Models

1. MPQ5072GG-AEC1-P: Similar to MPQ5073GG-AEC1-P but with a lower output current capacity of 2A.
2. MPQ5074GG-AEC1-P: Similar to MPQ5073GG-AEC1-P but with a higher output current capacity of 4A.
3. MPQ5075GG-AEC1-P: Similar to MPQ5073GG-AEC1-P but with additional features such as adjustable frequency and synchronization capability.

(Note: The above alternative models are for illustrative purposes only and may not represent the complete range of alternatives available in the market.)

In conclusion, the MPQ5073GG-AEC1-P is a voltage regulator IC that offers high efficiency, low power consumption, and a wide input voltage range. It is commonly used in portable electronic devices, IoT devices, industrial equipment, and automotive electronics. While it has limitations in terms of output current capacity, it provides reliable voltage regulation for various applications.