Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SMBG4758CE3/TR13
Lihat Detail Lembar Data

SMBG4758CE3/TR13

Product Overview

Category: Semiconductor
Use: Voltage regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-23
Essence: Regulates voltage in electronic circuits
Packaging/Quantity: Tape and reel

Specifications

  • Input Voltage: 4.5V to 18V
  • Output Voltage: 1.2V to 15V
  • Dropout Voltage: 300mV at 1A
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Small package size

Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives

Working Principles

The SMBG4758CE3/TR13 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback mechanism to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

The SMBG4758CE3/TR13 is commonly used in battery-powered devices, portable electronics, and automotive applications where a stable voltage supply is essential for proper operation.

Detailed and Complete Alternative Models

  1. LM1117
  2. XC6206
  3. LT1763

This completes the requested content in the English editing encyclopedia entry structure format, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SMBG4758CE3/TR13 dalam solusi teknis

  1. What is SMBG4758CE3/TR13?

    • SMBG4758CE3/TR13 is a specific model of sensor or component used in technical solutions, particularly in the field of electronics and engineering.

  2. How does SMBG4758CE3/TR13 work?

    • SMBG4758CE3/TR13 operates as a sensor or component that detects and measures specific parameters within a technical system, such as voltage, current, or temperature.

  3. What are the typical applications of SMBG4758CE3/TR13?

    • SMBG4758CE3/TR13 is commonly used in power supplies, industrial equipment, automotive systems, and other electronic devices where precise measurement and control are required.

  4. What are the key specifications of SMBG4758CE3/TR13?

    • The key specifications may include its operating voltage range, current rating, temperature range, accuracy, response time, and physical dimensions.

  5. How do I interface with SMBG4758CE3/TR13 in my design?

    • Interface options may include standard electrical connections, communication protocols, and integration with microcontrollers or data acquisition systems.

  6. Are there any special considerations for using SMBG4758CE3/TR13 in high-voltage applications?

    • Yes, it's important to ensure that SMBG4758CE3/TR13 is rated for the specific voltage levels and that proper isolation and safety measures are implemented.

  7. Can SMBG4758CE3/TR13 be used in harsh environments?

    • Some models of SMBG4758CE3/TR13 may have ruggedized or environmentally sealed versions suitable for use in harsh conditions.

  8. What are the common failure modes of SMBG4758CE3/TR13?

    • Failure modes may include overvoltage damage, overcurrent stress, thermal overload, or degradation over time due to environmental factors.

  9. Is calibration or compensation required for SMBG4758CE3/TR13?

    • Depending on the application, calibration or compensation may be necessary to maintain accurate measurements over time and environmental changes.

  10. Where can I find detailed technical documentation for SMBG4758CE3/TR13?

    • Detailed technical documentation, including datasheets, application notes, and specifications, can typically be obtained from the manufacturer's website or authorized distributors.