Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MXL5KP5.0CA
Lihat Detail Lembar Data

MXL5KP5.0CA

Introduction

MXL5KP5.0CA is a component belonging to the category of transient voltage suppressor diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against transient voltage spikes
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: DO-214AB (SMC), SMC/DO-214AB package
  • Essence: Silicon junction diode
  • Packaging/Quantity: Tape and reel packaging, 3000 units per reel

Specifications

  • Peak Pulse Power: 5000W
  • Breakdown Voltage Range: 6.4V to 220V
  • Operating Temperature Range: -55°C to +150°C
  • Storage Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The MXL5KP5.0CA has a standard SMC/DO-214AB package with two pins. Pin 1 is the cathode, and pin 2 is the anode.

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients by diverting excess current away from sensitive components.
  • Fast Response Time: Responds quickly to transient voltage spikes, minimizing the risk of damage to connected devices.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against transient voltage spikes
  • Fast response time
  • High surge capability

Disadvantages

  • Clamping voltage may be higher than some alternative models
  • Limited breakdown voltage range compared to some alternatives

Working Principles

When a transient voltage spike occurs, the MXL5KP5.0CA conducts excess current away from the protected circuit, limiting the voltage across it. This action helps prevent damage to sensitive electronic components.

Detailed Application Field Plans

The MXL5KP5.0CA is commonly used in various applications, including: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to MXL5KP5.0CA include: - SMAJ5.0A: Similar characteristics, SMA package - P6KE6.8CA: Higher breakdown voltage, axial package - 1.5KE6.8CA: Higher surge capability, axial package

In conclusion, MXL5KP5.0CA is a transient voltage suppressor diode with high surge capability, low clamping voltage, and fast response time. It is widely used for protecting electronic circuits from transient voltage spikes in various applications.

[Word count: 398]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MXL5KP5.0CA dalam solusi teknis

  1. What is MXL5KP5.0CA?

    • MXL5KP5.0CA is a type of transient voltage suppressor diode designed to protect electronic circuits from voltage spikes and transients.

  2. Where can MXL5KP5.0CA be used in technical solutions?

    • MXL5KP5.0CA can be used in various technical solutions such as power supplies, automotive electronics, industrial equipment, and communication systems to protect sensitive components from voltage surges.

  3. What is the maximum clamping voltage of MXL5KP5.0CA?

    • The maximum clamping voltage of MXL5KP5.0CA is 8.55V at 10A, which means it limits the peak voltage during a transient event to this level.

  4. What is the peak pulse power dissipation of MXL5KP5.0CA?

    • The peak pulse power dissipation of MXL5KP5.0CA is 5000W for a 10/1000μs waveform, indicating its ability to handle high transient power levels.

  5. How does MXL5KP5.0CA provide protection in technical solutions?

    • MXL5KP5.0CA provides protection by diverting excessive current away from sensitive components when a transient event occurs, thus safeguarding them from damage.

  6. What are the key features of MXL5KP5.0CA for technical applications?

    • The key features of MXL5KP5.0CA include low clamping voltage, fast response time, high surge capability, and compatibility with automated placement equipment.

  7. Can MXL5KP5.0CA be used in high-speed data line protection?

    • Yes, MXL5KP5.0CA is suitable for high-speed data line protection due to its fast response time and low capacitance.

  8. Is MXL5KP5.0CA RoHS compliant?

    • Yes, MXL5KP5.0CA is RoHS compliant, ensuring that it meets environmental standards for hazardous substance restrictions.

  9. What are the recommended operating and storage temperatures for MXL5KP5.0CA?

    • The recommended operating temperature range for MXL5KP5.0CA is -55°C to +150°C, and the storage temperature range is -55°C to +175°C.

  10. Are there any application notes or reference designs available for using MXL5KP5.0CA in technical solutions?

    • Yes, application notes and reference designs are available to guide engineers in implementing MXL5KP5.0CA effectively in their technical solutions, ensuring proper protection against transient events.