Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MC33164LP

MC33164LP

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Low Quiescent Current
  • Package: DIP-8, SOIC-8
  • Essence: Linear Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 26V
  • Output Voltage Range: 1.25V to 20V
  • Dropout Voltage: 0.4V (typical)
  • Quiescent Current: 120µA (typical)
  • Output Current: 100mA
  • Line Regulation: 0.04%/V
  • Load Regulation: 0.2%/mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MC33164LP has a total of 8 pins:

  1. VIN - Input voltage pin
  2. GND - Ground pin
  3. VOUT - Output voltage pin
  4. NC - No connection pin
  5. NC - No connection pin
  6. NC - No connection pin
  7. NC - No connection pin
  8. NC - No connection pin

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output differentials.
  • Low quiescent current minimizes power consumption in standby or idle modes.
  • Internal thermal shutdown protection prevents damage due to excessive temperature.
  • Short-circuit current limiting protects the device from overcurrent conditions.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications.
  • Stable output voltage with low ripple and noise.
  • Compact package options provide flexibility in design.
  • Low quiescent current extends battery life in portable devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a significant power loss in low input-output differential scenarios.

Working Principles

The MC33164LP is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The dropout voltage is minimized by utilizing a PNP pass transistor and an error amplifier with low input offset voltage.

Detailed Application Field Plans

The MC33164LP is commonly used in various electronic devices and systems, including:

  1. Battery-powered devices: Portable audio players, handheld gaming consoles, and remote controls.
  2. Automotive electronics: Dashboard displays, infotainment systems, and lighting controls.
  3. Industrial equipment: Sensors, actuators, and control systems.
  4. Communication devices: Wireless routers, modems, and network switches.
  5. Medical devices: Patient monitoring systems, infusion pumps, and diagnostic equipment.

Detailed and Complete Alternative Models

  1. LM317: Adjustable Linear Voltage Regulator
  2. LT1084: Low Dropout Positive Fixed Voltage Regulator
  3. LM1117: Low Dropout Linear Regulator
  4. MAX603: Micropower Low Dropout Voltage Reference

These alternative models offer similar functionality and can be considered as substitutes for the MC33164LP in various applications.

Word count: 410 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MC33164LP dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MC33164LP in technical solutions:

  1. Q: What is MC33164LP? A: MC33164LP is a low dropout voltage regulator (LDO) integrated circuit commonly used in various technical solutions.

  2. Q: What is the input voltage range of MC33164LP? A: The input voltage range of MC33164LP is typically between 2.7V and 16V.

  3. Q: What is the output voltage range of MC33164LP? A: The output voltage range of MC33164LP can be adjusted from 1.25V to the input voltage minus the dropout voltage.

  4. Q: What is the dropout voltage of MC33164LP? A: The dropout voltage of MC33164LP is typically around 0.5V at a load current of 100mA.

  5. Q: What is the maximum load current that MC33164LP can handle? A: MC33164LP can handle a maximum load current of up to 500mA.

  6. Q: Is MC33164LP suitable for battery-powered applications? A: Yes, MC33164LP is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.

  7. Q: Does MC33164LP have built-in thermal shutdown protection? A: Yes, MC33164LP has built-in thermal shutdown protection to prevent overheating and damage.

  8. Q: Can MC33164LP operate in both fixed and adjustable output voltage modes? A: Yes, MC33164LP can be configured to operate in either fixed or adjustable output voltage modes.

  9. Q: What is the typical accuracy of the output voltage of MC33164LP? A: The typical accuracy of the output voltage of MC33164LP is around ±2%.

  10. Q: What are some common applications of MC33164LP? A: MC33164LP is commonly used in various technical solutions such as battery-powered devices, portable electronics, automotive systems, and industrial control systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.