Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
JANTX2N2484UB
Lihat Detail Lembar Data

JANTX2N2484UB

Product Overview

Category

The JANTX2N2484UB belongs to the category of high-performance transistors.

Use

It is commonly used in electronic circuits for amplification and switching purposes.

Characteristics

  • High voltage capability
  • Low input capacitance
  • High current gain
  • Low noise

Package

The JANTX2N2484UB is typically available in a TO-18 metal can package.

Essence

This transistor is essential for applications requiring high voltage and low noise operation.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Collector-Emitter Voltage: 60V
  • Maximum Collector Current: 0.1A
  • Power Dissipation: 0.5W
  • Transition Frequency: 100MHz
  • Operating Temperature Range: -65°C to 200°C

Detailed Pin Configuration

The JANTX2N2484UB has three pins: 1. Base (B) 2. Emitter (E) 3. Collector (C)

Functional Features

  • High voltage capability allows for use in various power supply and amplifier circuits.
  • Low input capacitance minimizes the impact on high-frequency signal processing.
  • High current gain enables efficient signal amplification.
  • Low noise characteristics make it suitable for sensitive electronic applications.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low noise operation
  • Suitable for high-frequency applications

Disadvantages

  • Limited maximum collector current
  • Relatively low power dissipation rating

Working Principles

The JANTX2N2484UB operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its terminals to amplify or switch electronic signals.

Detailed Application Field Plans

The JANTX2N2484UB is commonly used in the following applications: - Audio amplifiers - Switching circuits - Voltage regulators - Oscillator circuits - RF amplifiers

Detailed and Complete Alternative Models

Some alternative models to the JANTX2N2484UB include: - 2N3904 - BC547 - 2N2222 - MPS2222A

In conclusion, the JANTX2N2484UB is a high-performance transistor with specific advantages and limitations, making it suitable for various electronic applications requiring high voltage capability and low noise operation.

[Word count: 366]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan JANTX2N2484UB dalam solusi teknis

  1. What is the JANTX2N2484UB transistor used for?

    • The JANTX2N2484UB is a high-reliability, high-performance NPN bipolar junction transistor commonly used in military and aerospace applications.

  2. What are the key specifications of the JANTX2N2484UB transistor?

    • The JANTX2N2484UB transistor typically has a maximum collector current of 600mA, a maximum power dissipation of 625mW, and a voltage rating of 40V.

  3. How does the JANTX2N2484UB compare to commercial-grade transistors?

    • The JANTX2N2484UB is designed and tested to meet stringent military and aerospace standards for reliability and performance, making it suitable for harsh environments and critical applications.

  4. Can the JANTX2N2484UB be used in commercial or industrial applications?

    • While the JANTX2N2484UB is primarily intended for military and aerospace use, it can also be utilized in certain high-reliability commercial and industrial applications where its ruggedness and performance characteristics are beneficial.

  5. What are the typical operating conditions for the JANTX2N2484UB?

    • The JANTX2N2484UB transistor is typically operated within a temperature range of -65°C to +200°C and is designed to withstand high levels of radiation and other environmental stresses.

  6. Are there any specific handling or storage requirements for the JANTX2N2484UB?

    • It is recommended to follow standard ESD (electrostatic discharge) precautions and store the JANTX2N2484UB in a controlled environment to maintain its reliability and performance.

  7. Can the JANTX2N2484UB be used in RF (radio frequency) applications?

    • The JANTX2N2484UB can be utilized in certain RF applications due to its high-frequency capabilities and low noise characteristics.

  8. What are the typical failure modes of the JANTX2N2484UB?

    • The JANTX2N2484UB may experience failures related to excessive voltage or current, thermal stress, or radiation exposure, which is why it is designed to withstand such conditions.

  9. Is the JANTX2N2484UB compatible with lead-free soldering processes?

    • Yes, the JANTX2N2484UB is compatible with lead-free soldering processes, but it is important to adhere to the recommended soldering profiles and techniques to prevent damage to the device.

  10. Where can I find detailed technical documentation for the JANTX2N2484UB?

    • Detailed technical documentation, including datasheets and application notes, for the JANTX2N2484UB can be obtained from authorized distributors or directly from the manufacturer's website.