Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
JANTX2N1486
Lihat Detail Lembar Data

JANTX2N1486

Product Overview

Category

The JANTX2N1486 belongs to the category of high-performance NPN transistors.

Use

It is commonly used in applications requiring high-speed switching and amplification of low-level signals.

Characteristics

  • High-speed switching capability
  • Low noise amplification
  • High reliability

Package

The JANTX2N1486 is typically available in a TO-39 metal can package.

Essence

This transistor is essential for electronic circuits requiring precise signal amplification and fast switching.

Packaging/Quantity

The JANTX2N1486 is usually packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Maximum Collector-Emitter Voltage: 80V
  • Maximum Collector-Base Voltage: 100V
  • Maximum Emitter-Base Voltage: 7V
  • Collector Current - Continuous: 0.5A
  • Power Dissipation: 0.8W
  • Transition Frequency: 50MHz
  • Noise Figure: 3dB

Detailed Pin Configuration

The JANTX2N1486 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High-speed switching
  • Low noise amplification
  • High reliability and stability

Advantages

  • Suitable for high-frequency applications
  • Low noise performance
  • Reliable and durable

Disadvantages

  • Limited maximum collector current
  • Relatively low power dissipation capability

Working Principles

The JANTX2N1486 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its three terminals to amplify or switch electronic signals.

Detailed Application Field Plans

The JANTX2N1486 is widely used in: - Radio frequency (RF) amplifiers - Oscillator circuits - High-frequency signal processing

Detailed and Complete Alternative Models

Some alternative models to the JANTX2N1486 include: - 2N2222 - BC547 - 2N3904 - MPS2222A

In conclusion, the JANTX2N1486 is a high-performance NPN transistor known for its high-speed switching and low noise amplification capabilities. It is commonly used in various electronic applications requiring precise signal amplification and fast switching, particularly in high-frequency circuits.

[Word count: 313]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan JANTX2N1486 dalam solusi teknis

  1. What is JANTX2N1486?

    • JANTX2N1486 is a high-reliability, military-grade NPN bipolar junction transistor (BJT) designed for use in demanding applications.

  2. What are the key specifications of JANTX2N1486?

    • The JANTX2N1486 features a maximum collector-emitter voltage of 80V, a maximum collector current of 3A, and a power dissipation of 25W.

  3. In what types of technical solutions is JANTX2N1486 commonly used?

    • JANTX2N1486 is commonly used in aerospace, defense, and other high-reliability applications where ruggedness and performance under harsh conditions are critical.

  4. What are the temperature range and operating conditions for JANTX2N1486?

    • JANTX2N1486 is designed to operate within a wide temperature range, typically from -65°C to +200°C, making it suitable for extreme environments.

  5. What are the typical applications for JANTX2N1486?

    • Typical applications include power switching, linear amplification, and signal processing in military and aerospace systems.

  6. What are the advantages of using JANTX2N1486 over commercial-grade transistors?

    • JANTX2N1486 offers higher reliability, extended temperature range, and enhanced performance compared to commercial-grade transistors, making it suitable for mission-critical applications.

  7. Are there any specific considerations for designing with JANTX2N1486?

    • Designers should consider the ruggedness, thermal management, and long-term reliability requirements when incorporating JANTX2N1486 into their systems.

  8. What are the potential failure modes of JANTX2N1486 and how can they be mitigated?

    • Potential failure modes include thermal stress, voltage spikes, and radiation exposure. Mitigation strategies may involve proper heat sinking, transient protection, and shielding in radiation-prone environments.

  9. Can JANTX2N1486 be replaced by commercial-grade transistors in non-military applications?

    • While technically possible, it's important to assess the specific environmental and reliability requirements of the application before considering a substitution.

  10. Where can I find detailed technical documentation and support for JANTX2N1486?

    • Detailed technical documentation and support for JANTX2N1486 can be obtained from authorized distributors, manufacturers, and military specification databases.