Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
JANTX1N4964C
Lihat Detail Lembar Data

JANTX1N4964C

Product Overview

Category

The JANTX1N4964C belongs to the category of semiconductor devices, specifically a Zener diode.

Use

It is commonly used for voltage regulation and protection in electronic circuits.

Characteristics

  • Voltage regulation
  • Reverse-bias operation
  • Precise breakdown voltage
  • Low dynamic impedance

Package

The JANTX1N4964C is typically available in a DO-41 package.

Essence

The essence of the JANTX1N4964C lies in its ability to maintain a constant voltage across its terminals when operated in reverse-bias mode.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Breakdown Voltage: 22V
  • Power Dissipation: 500mW
  • Zener Impedance: 10Ω
  • Operating Temperature Range: -65°C to 200°C

Detailed Pin Configuration

The JANTX1N4964C has a standard two-pin configuration, with the anode and cathode serving as the connection points.

Functional Features

  • Precise voltage regulation
  • Protection against voltage spikes
  • Stable operation over a wide temperature range

Advantages

  • Accurate voltage regulation
  • Robust protection capabilities
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to excessive current flow

Working Principles

The JANTX1N4964C operates based on the principle of the Zener effect, where it maintains a nearly constant voltage drop across its terminals when reverse-biased.

Detailed Application Field Plans

The JANTX1N4964C finds applications in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to the JANTX1N4964C include: - 1N4735A - BZX55C22 - LM385Z-2.5

In conclusion, the JANTX1N4964C Zener diode offers precise voltage regulation and protection in electronic circuits, making it a valuable component in various applications.

[Word count: 299]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan JANTX1N4964C dalam solusi teknis

  1. What is the JANTX1N4964C diode used for?

    • The JANTX1N4964C diode is commonly used for voltage regulation, surge suppression, and rectification in various technical solutions.

  2. What are the key specifications of the JANTX1N4964C diode?

    • The JANTX1N4964C diode is a 400V, 10A silicon rectifier with fast recovery times and low forward voltage drop.

  3. How does the JANTX1N4964C diode compare to other similar diodes?

    • The JANTX1N4964C diode offers high reliability, rugged construction, and consistent performance, making it suitable for demanding applications.

  4. In what types of circuits can the JANTX1N4964C diode be used?

    • The JANTX1N4964C diode can be used in power supplies, inverters, motor drives, and other high-power electronic circuits requiring efficient rectification and surge protection.

  5. What are the temperature and voltage ratings for the JANTX1N4964C diode?

    • The JANTX1N4964C diode is rated for operation over a wide temperature range (-65°C to +175°C) and can handle up to 400V of reverse voltage.

  6. Can the JANTX1N4964C diode be used in automotive applications?

    • Yes, the JANTX1N4964C diode is suitable for automotive systems, including battery charging, voltage regulation, and protection against electrical transients.

  7. Does the JANTX1N4964C diode require heatsinking in high-power applications?

    • Yes, in high-power applications, proper heatsinking is recommended to ensure optimal thermal performance and long-term reliability.

  8. Are there any common failure modes associated with the JANTX1N4964C diode?

    • Common failure modes include thermal overstress, reverse voltage breakdown, and excessive current surges beyond the diode's ratings.

  9. What are the typical applications where the JANTX1N4964C diode excels?

    • The JANTX1N4964C diode is well-suited for use in industrial power supplies, welding equipment, uninterruptible power supplies (UPS), and high-voltage DC systems.

  10. Where can I find detailed application notes and guidelines for using the JANTX1N4964C diode?

    • Detailed application notes and guidelines for the JANTX1N4964C diode can be found in the manufacturer's datasheet, technical documentation, and application-specific reference designs.