Microsemi Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
2N4856UB

2N4856UB

Product Overview

Category

The 2N4856UB belongs to the category of field-effect transistors (FETs).

Use

It is commonly used as a general-purpose amplifier or switch in electronic circuits.

Characteristics

  • Low noise figure
  • High input impedance
  • Moderate gain
  • Wide dynamic range

Package

The 2N4856UB is typically available in TO-92 packaging.

Essence

This FET is essential for amplifying weak signals and switching high-frequency signals in various electronic applications.

Packaging/Quantity

The 2N4856UB is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Drain-Source Voltage: 40V
  • Maximum Gate-Source Voltage: ±40V
  • Continuous Drain Current: 10mA
  • Power Dissipation: 350mW
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The 2N4856UB has three pins: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • High input impedance allows for minimal loading of preceding stages.
  • Low noise figure makes it suitable for low-noise amplifier applications.
  • Can be used as a switch due to its ability to handle high-frequency signals.

Advantages

  • Low noise figure enhances signal fidelity.
  • High input impedance minimizes signal distortion.
  • Versatile application in both amplification and switching circuits.

Disadvantages

  • Moderate gain may require additional amplification stages in some applications.
  • Limited maximum drain-source voltage compared to other FETs.

Working Principles

The 2N4856UB operates based on the control of current flow between the source and drain terminals through the manipulation of the gate-source voltage.

Detailed Application Field Plans

Audio Amplification

The 2N4856UB can be used in audio amplifiers to achieve low-noise amplification of weak audio signals.

RF Signal Switching

Due to its ability to handle high-frequency signals, the 2N4856UB is suitable for RF signal switching applications in communication systems.

Sensor Interface Circuits

Its high input impedance makes it ideal for interfacing with sensors to amplify and process weak sensor signals.

Detailed and Complete Alternative Models

  • 2N4857UB
  • J175
  • BF245A

In conclusion, the 2N4856UB is a versatile field-effect transistor with applications in audio amplification, RF signal switching, and sensor interface circuits. Its low noise figure and high input impedance make it an attractive choice for various electronic designs, despite its moderate gain and limited maximum drain-source voltage. Additionally, alternative models such as the 2N4857UB, J175, and BF245A offer similar functionality for different design considerations.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 2N4856UB dalam solusi teknis

  1. What is the 2N4856UB transistor used for?

    • The 2N4856UB is a general-purpose N-channel JFET (junction field-effect transistor) commonly used for low-frequency, small-signal amplification and switching applications.

  2. What are the key features of the 2N4856UB transistor?

    • The 2N4856UB features low noise, high input impedance, and low input capacitance, making it suitable for use in audio amplifiers, instrumentation, and control circuits.

  3. What are the typical applications of the 2N4856UB transistor?

    • Typical applications include audio preamplifiers, signal processing circuits, analog switches, and voltage-controlled resistors.

  4. What are the electrical characteristics of the 2N4856UB transistor?

    • The 2N4856UB has a maximum drain-source voltage of 40V, a maximum gate-source voltage of 40V, and a maximum continuous drain current of 10mA.

  5. How does the 2N4856UB compare to other similar transistors?

    • Compared to other JFETs, the 2N4856UB offers low noise performance and high input impedance, making it suitable for low-level signal amplification.

  6. What are the recommended operating conditions for the 2N4856UB transistor?

    • The 2N4856UB operates best within a temperature range of -55°C to 150°C and should be used with appropriate biasing and voltage levels as specified in the datasheet.

  7. Can the 2N4856UB be used in high-frequency applications?

    • The 2N4856UB is not typically recommended for high-frequency applications due to its inherent limitations in terms of cutoff frequency and transition frequency.

  8. Are there any specific considerations for circuit design when using the 2N4856UB?

    • Proper biasing, input impedance matching, and attention to thermal considerations are important for maximizing the performance of the 2N4856UB in a given circuit.

  9. What are the packaging options available for the 2N4856UB?

    • The 2N4856UB is commonly available in TO-92 packaging, which is suitable for through-hole PCB mounting and prototyping.

  10. Where can I find detailed specifications and application notes for the 2N4856UB?

    • Detailed specifications, application notes, and usage guidelines for the 2N4856UB can be found in the manufacturer's datasheet and application notes, which are available on their official website or through authorized distributors.