1PMT4621/TR7

Product Overview

Use

It is commonly used for voltage regulation and transient voltage suppression in electronic circuits.

Characteristics

Low leakage current
High surge capability
Fast response time

Package

The 1PMT4621/TR7 is typically available in a DO-214AC (SMA) package.

Essence

This product serves as a protective component, safeguarding electronic circuits from voltage spikes and surges.

Packaging/Quantity

It is usually packaged in reels with varying quantities depending on the manufacturer's specifications.

Specifications

Reverse Standoff Voltage: 15V
Breakdown Voltage: 16.7V
Maximum Clamping Voltage: 27.4V
Peak Pulse Current: 10A
Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The 1PMT4621/TR7 typically has two pins, with the anode connected to one pin and the cathode connected to the other.

Functional Features

Transient voltage suppression
Voltage regulation
Protection against voltage spikes

Advantages

Fast response time
High surge capability
Low leakage current

Disadvantages

Limited maximum clamping voltage
Requires careful handling during installation

Working Principles

The 1PMT4621/TR7 operates by diverting excessive voltage away from sensitive components in a circuit, thereby protecting them from damage due to voltage spikes or surges.

Detailed Application Field Plans

This product finds applications in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the 1PMT4621/TR7 include: - 1PMT5933B/TR13 - 1PMT5929B/TR12 - 1PMT5918B/TR9

In conclusion, the 1PMT4621/TR7 is a crucial component in electronic circuits, providing protection against voltage transients and regulating voltage levels. Its fast response time and high surge capability make it a valuable asset in various electronic applications.

[Word Count: 298]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 1PMT4621/TR7 dalam solusi teknis

What is 1PMT4621/TR7?
- 1PMT4621/TR7 is a type of zener diode, commonly used for voltage regulation and transient voltage suppression in electronic circuits.
What are the key specifications of 1PMT4621/TR7?
- The 1PMT4621/TR7 has a voltage rating of 15V, a power dissipation of 3W, and a tolerance of ±5%.
How is 1PMT4621/TR7 typically used in technical solutions?
- It is often used to regulate voltage in power supplies, protect sensitive components from voltage spikes, and stabilize voltage levels in various electronic devices.
What are the advantages of using 1PMT4621/TR7 in technical applications?
- Its compact size, high reliability, and precise voltage regulation make it suitable for a wide range of electronic designs.
Can 1PMT4621/TR7 be used for overvoltage protection?
- Yes, it can be employed to clamp or suppress transient overvoltages, safeguarding connected components from damage.
Are there any limitations to consider when using 1PMT4621/TR7?
- It's important to ensure that the maximum power dissipation and voltage ratings are not exceeded to prevent device failure.
What are some typical circuit configurations for integrating 1PMT4621/TR7?
- It can be used in series with a current-limiting resistor for voltage regulation or in parallel with other components for transient suppression.
How does 1PMT4621/TR7 compare to other zener diodes in terms of performance?
- It offers similar performance to other zener diodes but with specific voltage and power ratings that suit certain applications.
Can 1PMT4621/TR7 be used in automotive electronics?
- Yes, it can be utilized in automotive systems for voltage regulation and transient protection due to its robust design.
Where can I find detailed application notes for using 1PMT4621/TR7 in technical solutions?
- Detailed application notes and datasheets can be obtained from the manufacturer's website or distributor's resources for comprehensive guidance on its implementation.