Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
1N4679 (DO35)

1N4679 (DO35) - English Editing Encyclopedia Entry

Introduction

The 1N4679 (DO35) is a diode that belongs to the category of semiconductor devices. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Rectification, voltage regulation, signal demodulation
  • Characteristics: Small size, high reliability, low forward voltage drop
  • Package: DO35
  • Essence: Silicon diode
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Forward Voltage Drop: Typically 0.7V
  • Reverse Voltage: 20V
  • Maximum Continuous Forward Current: 150mA
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N4679 (DO35) diode has two pins, anode and cathode, with the anode being the positive terminal and the cathode being the negative terminal.

Functional Features

  • Fast Switching: Enables rapid response in electronic circuits
  • Low Leakage Current: Minimizes power loss in standby mode
  • High Reliability: Ensures consistent performance over time

Advantages and Disadvantages

Advantages

  • Small size allows for compact circuit design
  • Low forward voltage drop reduces power dissipation
  • High reliability ensures long-term functionality

Disadvantages

  • Limited reverse voltage tolerance compared to other diodes
  • Lower maximum current rating than some larger diode options

Working Principles

The 1N4679 (DO35) operates based on the principle of creating a one-way flow of current when forward-biased and blocking current flow when reverse-biased. This behavior makes it suitable for rectification and voltage regulation applications.

Detailed Application Field Plans

Rectification

The diode can be used in AC to DC conversion circuits, allowing only the positive half-cycle of the input waveform to pass through.

Voltage Regulation

By utilizing the forward voltage drop characteristic, the diode can be employed in voltage regulation circuits to maintain a stable output voltage.

Signal Demodulation

In radio frequency circuits, the diode can extract the modulating signal from a carrier wave, enabling signal demodulation.

Detailed and Complete Alternative Models

  • 1N4148 (DO-35)
  • 1N4001 (DO-41)
  • 1N5819 (DO-41)
  • 1N5399 (DO-15)

In conclusion, the 1N4679 (DO35) diode is a versatile semiconductor device with applications in rectification, voltage regulation, and signal demodulation. Its small size, fast switching, and low forward voltage drop make it suitable for various electronic circuits. While it has limitations in terms of reverse voltage tolerance and maximum current rating, it remains a popular choice for many design scenarios.

Word Count: 411

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 1N4679 (DO35) dalam solusi teknis

  1. What is the 1N4679 (DO35) diode used for?

    • The 1N4679 (DO35) diode is commonly used for general-purpose rectification, voltage regulation, and signal demodulation in electronic circuits.
  2. What are the key specifications of the 1N4679 (DO35) diode?

    • The 1N4679 (DO35) diode typically has a maximum repetitive peak reverse voltage of 1000V, a forward current of 40mA, and a forward voltage drop of around 1V at 10mA.
  3. Can the 1N4679 (DO35) diode be used for voltage regulation?

    • Yes, the 1N4679 (DO35) diode can be used for simple voltage regulation applications, especially in low-power circuits.
  4. Is the 1N4679 (DO35) diode suitable for high-frequency applications?

    • The 1N4679 (DO35) diode is not specifically designed for high-frequency applications, but it can be used in moderate frequency circuits with appropriate considerations for its characteristics.
  5. What are the typical applications of the 1N4679 (DO35) diode?

    • Typical applications include power supply rectification, reverse polarity protection, freewheeling diode in inductive loads, and signal demodulation in communication circuits.
  6. Does the 1N4679 (DO35) diode have any temperature limitations?

    • The 1N4679 (DO35) diode typically operates within a temperature range of -65°C to +175°C, making it suitable for a wide range of environments.
  7. Can the 1N4679 (DO35) diode handle surge currents?

    • The 1N4679 (DO35) diode has limited surge current capabilities, so it should be used with caution in applications where surge currents may occur.
  8. What are the potential failure modes of the 1N4679 (DO35) diode?

    • Common failure modes include overvoltage breakdown, excessive forward current leading to thermal damage, and mechanical stress on the package.
  9. Are there any specific layout considerations when using the 1N4679 (DO35) diode?

    • It's important to minimize lead lengths and keep the diode close to other components to reduce parasitic inductance and ensure proper performance.
  10. Can the 1N4679 (DO35) diode be used in automotive applications?

    • The 1N4679 (DO35) diode can be used in certain automotive applications, but it's essential to verify its suitability for specific requirements such as temperature range and reliability standards.