Micron Technology Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PC28F128G18AE
Lihat Detail Lembar Data

PC28F128G18AE

Basic Information Overview

  • Category: Flash Memory
  • Use: Data storage in electronic devices
  • Characteristics:
    • Non-volatile memory
    • High-density storage
    • Fast read and write speeds
  • Package: Integrated Circuit (IC)
  • Essence: Stores data electronically without the need for power
  • Packaging/Quantity: Typically sold individually or in bulk quantities

Specifications

  • Capacity: 128 gigabytes (GB)
  • Interface: Parallel
  • Voltage: 3.3 volts (V)
  • Access Time: 70 nanoseconds (ns)
  • Erase/Program Cycles: 100,000 cycles
  • Operating Temperature: -40 to 85 degrees Celsius

Detailed Pin Configuration

The PC28F128G18AE has a total of 48 pins. The pin configuration is as follows:

  1. VCC (Power Supply)
  2. A0-A19 (Address Inputs)
  3. DQ0-DQ15 (Data Inputs/Outputs)
  4. WE# (Write Enable)
  5. CE# (Chip Enable)
  6. OE# (Output Enable)
  7. RE# (Read Enable)
  8. WP# (Write Protect)
  9. RY/BY# (Ready/Busy)
  10. RP#/VP# (Reset/Validation)

Functional Features

  • High-speed data transfer
  • Reliable data retention
  • Low power consumption
  • Built-in error correction codes (ECC)
  • Block erase and sector erase operations
  • Hardware and software protection mechanisms

Advantages and Disadvantages

Advantages

  • Large storage capacity
  • Fast read and write speeds
  • High endurance
  • Compact size
  • Wide operating temperature range

Disadvantages

  • Relatively high cost compared to other storage options
  • Limited number of erase/program cycles
  • Requires specialized programming equipment

Working Principles

The PC28F128G18AE utilizes a floating gate transistor technology to store data. It consists of memory cells organized into blocks, with each cell capable of storing multiple bits of information. When data is written, electrons are trapped in the floating gate, altering the cell's electrical characteristics. This trapped charge determines the stored data. During read operations, the charge level is measured to retrieve the stored information.

Detailed Application Field Plans

The PC28F128G18AE is commonly used in various electronic devices that require high-capacity and non-volatile storage. Some application fields include: - Solid-state drives (SSDs) - Digital cameras - Mobile phones - Tablets - Automotive systems - Industrial control systems

Detailed and Complete Alternative Models

  1. PC28F256G18AE - 256GB capacity flash memory
  2. PC28F64G18AE - 64GB capacity flash memory
  3. PC28F512G18AE - 512GB capacity flash memory
  4. PC28F32G18AE - 32GB capacity flash memory
  5. PC28F1T8G18AE - 1TB capacity flash memory

These alternative models offer different storage capacities to cater to varying requirements.

Word count: 320 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PC28F128G18AE dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of PC28F128G18AE in technical solutions:

  1. Q: What is PC28F128G18AE? A: PC28F128G18AE is a specific model of NAND flash memory chip manufactured by Intel.

  2. Q: What are the key features of PC28F128G18AE? A: PC28F128G18AE offers a capacity of 128GB, uses a NAND flash architecture, and supports high-speed data transfer rates.

  3. Q: What are some typical applications of PC28F128G18AE? A: PC28F128G18AE is commonly used in various technical solutions such as solid-state drives (SSDs), embedded systems, industrial automation, and automotive electronics.

  4. Q: What is the interface used for connecting PC28F128G18AE to a system? A: PC28F128G18AE uses a standard NAND flash interface such as ONFI (Open NAND Flash Interface) or Toggle Mode.

  5. Q: What voltage levels does PC28F128G18AE operate at? A: PC28F128G18AE operates at a supply voltage of typically 3.3V or 1.8V, depending on the specific variant.

  6. Q: Can PC28F128G18AE be used as a boot device? A: Yes, PC28F128G18AE can be used as a boot device in many systems, including embedded devices and computers.

  7. Q: Does PC28F128G18AE support error correction codes (ECC)? A: Yes, PC28F128G18AE supports built-in ECC functionality to ensure data integrity and reliability.

  8. Q: What is the endurance rating of PC28F128G18AE? A: The endurance rating of PC28F128G18AE specifies the number of program/erase cycles it can reliably withstand, typically in the range of thousands to millions.

  9. Q: Can PC28F128G18AE operate in extreme temperature conditions? A: Yes, PC28F128G18AE is designed to operate reliably in a wide temperature range, including both industrial and automotive temperature grades.

  10. Q: Are there any specific software tools or drivers required for using PC28F128G18AE? A: Yes, Intel provides software development kits (SDKs) and drivers that enable easy integration and management of PC28F128G18AE in various operating systems and platforms.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of the technical solution.