Lihat spesifikasi untuk detail produk.
MT46V64M16P-6T IT:A
Product Overview
Category
The MT46V64M16P-6T IT:A belongs to the category of dynamic random access memory (DRAM) chips.
Use
This product is primarily used in electronic devices such as computers, smartphones, and tablets for storing and accessing data during operation.
Characteristics
- High-speed data storage and retrieval capabilities
- Volatile memory that requires constant power supply
- Offers large storage capacity
- Supports fast read and write operations
- Compatible with various electronic devices
Package
The MT46V64M16P-6T IT:A is typically packaged in a small form factor integrated circuit (IC) package. The specific package type may vary depending on the manufacturer.
Essence
The essence of this product lies in its ability to provide high-speed and reliable data storage and retrieval functions for electronic devices.
Packaging/Quantity
The MT46V64M16P-6T IT:A is usually sold in bulk packaging, which includes multiple units of the product. The exact quantity may vary depending on the supplier.
Specifications
- Memory Type: Dynamic Random Access Memory (DRAM)
- Capacity: 64 megabits (8 megabytes)
- Organization: 16M words x 16 bits
- Operating Voltage: 3.3V
- Speed Grade: -6T
- Interface: Synchronous DRAM (SDRAM)
- Pin Count: 66 pins
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MT46V64M16P-6T IT:A has a total of 66 pins. The pin configuration is as follows:
- VDD
- DQ0
- DQ1
- DQ2
- DQ3
- DQ4
- DQ5
- DQ6
- DQ7
- VSS
- DQ8
- DQ9
- DQ10
- DQ11
- DQ12
- DQ13
- DQ14
- DQ15
- VSS
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- A8
- A9
- A10
- A11
- A12
- A13
- A14
- A15
- A16
- A17
- A18
- A19
- A20
- A21
- A22
- A23
- A24
- A25
- A26
- A27
- A28
- A29
- A30
- A31
- /CAS
- /RAS
- /WE
- /CS
- /CKE
- /CK
- VDD
- VSS
- VREF
- /BL
- /AL
- /UDQM
- /LDQM
- VSS
- VDD
Functional Features
- High-speed data transfer rate
- Low power consumption
- Support for burst mode operations
- On-die termination (ODT) for improved signal integrity
- Auto-refresh and self-refresh modes for power-saving
- Error correction code (ECC) support for data integrity
Advantages and Disadvantages
Advantages
- Fast data access and transfer speeds
- Large storage capacity
- Low power consumption
- Support for various electronic devices
- Error correction capabilities for enhanced data reliability
Disadvantages
- Volatile memory requires constant power supply
- Relatively higher cost compared to other memory technologies
- Limited lifespan due to the finite number of write cycles
Working Principles
The MT46V64M16P-6T IT:A operates based on the principles of dynamic random access memory. It stores data in a matrix of capacitors, with each capacitor representing a single bit of information. The stored data needs to be periodically refreshed to maintain its integrity. When the device requires access to specific data, it sends appropriate signals to the memory chip, which retrieves and transfers the requested data.
Detailed Application Field Plans
The MT46V64M16P-6T IT:A is widely used in various electronic devices, including but not limited to: - Personal computers - Laptops - Servers - Smartphones - Tablets - Gaming consoles
Its high-speed data access and large storage capacity make it suitable
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MT46V64M16P-6T IT:A dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of MT46V64M16P-6T IT:A in technical solutions:
Q: What is the capacity of the MT46V64M16P-6T IT:A memory module? A: The MT46V64M16P-6T IT:A has a capacity of 64 megabytes (MB).
Q: What is the speed rating of the MT46V64M16P-6T IT:A memory module? A: The MT46V64M16P-6T IT:A has a speed rating of 6T, which indicates a clock cycle time of 6 nanoseconds.
Q: What type of memory interface does the MT46V64M16P-6T IT:A use? A: The MT46V64M16P-6T IT:A uses a DDR SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory) interface.
Q: Can the MT46V64M16P-6T IT:A be used in both desktop and laptop computers? A: Yes, the MT46V64M16P-6T IT:A can be used in both desktop and laptop computers as long as they support DDR SDRAM.
Q: Is the MT46V64M16P-6T IT:A compatible with different operating systems? A: Yes, the MT46V64M16P-6T IT:A is compatible with various operating systems such as Windows, Linux, and macOS.
Q: Can the MT46V64M16P-6T IT:A be used in embedded systems or industrial applications? A: Yes, the MT46V64M16P-6T IT:A is suitable for use in embedded systems and industrial applications that require DDR SDRAM.
Q: What is the voltage requirement for the MT46V64M16P-6T IT:A memory module? A: The MT46V64M16P-6T IT:A operates at a voltage of 2.5 volts (V).
Q: Does the MT46V64M16P-6T IT:A support ECC (Error Correction Code) functionality? A: No, the MT46V64M16P-6T IT:A does not support ECC functionality. It is a non-ECC memory module.
Q: Can the MT46V64M16P-6T IT:A be used in high-performance gaming systems? A: Yes, the MT46V64M16P-6T IT:A can be used in high-performance gaming systems that require DDR SDRAM.
Q: Is the MT46V64M16P-6T IT:A a commonly used memory module in the industry? A: Yes, the MT46V64M16P-6T IT:A is a widely used memory module due to its capacity, speed, and compatibility with various systems.
Please note that the answers provided here are based on general knowledge and may vary depending on specific technical requirements and configurations.