Micron Technology Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MT29F4G08ABADAH4-ITE:D

MT29F4G08ABADAH4-ITE:D

Product Overview

Category

The MT29F4G08ABADAH4-ITE:D belongs to the category of NAND Flash Memory.

Use

It is used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Large storage capacity
  • Low power consumption

Package

The MT29F4G08ABADAH4-ITE:D is typically available in a small form factor package suitable for surface mounting on printed circuit boards.

Essence

This NAND flash memory device is essential for storing and retrieving data in electronic devices.

Packaging/Quantity

The MT29F4G08ABADAH4-ITE:D is commonly packaged in reels or trays and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Storage Capacity: 4GB
  • Interface: Parallel
  • Voltage Supply: 2.7V - 3.6V
  • Operating Temperature: -40°C to 85°C
  • Data Transfer Rate: Up to 200MB/s

Detailed Pin Configuration

The detailed pin configuration for the MT29F4G08ABADAH4-ITE:D can be found in the product datasheet provided by the manufacturer.

Functional Features

  • Page Read and Program Operations
  • Block Erase Operation
  • Internal Data Organization
  • Error Correction Code (ECC) Support

Advantages

  • High-speed data transfer enhances device performance
  • Large storage capacity accommodates extensive data storage needs
  • Low power consumption prolongs battery life in portable devices

Disadvantages

  • Limited endurance compared to other non-volatile memory technologies
  • Susceptible to physical damage if not handled properly

Working Principles

The MT29F4G08ABADAH4-ITE:D operates based on the principles of NAND flash memory technology, utilizing electrically programmable cells to store and retrieve data.

Detailed Application Field Plans

The MT29F4G08ABADAH4-ITE:D is widely used in applications requiring high-density data storage, such as: - Smartphones and Tablets - Digital Cameras - Solid-State Drives (SSDs)

Detailed and Complete Alternative Models

Some alternative models to the MT29F4G08ABADAH4-ITE:D include: - Samsung K9K8G08U0M - Micron MT29F4G08ABBDAH4-ITE:D - Toshiba TH58NVG7D2FLA89

In conclusion, the MT29F4G08ABADAH4-ITE:D NAND flash memory device offers high-speed, reliable data storage solutions for a wide range of electronic devices, making it an essential component in modern technology.

[Word Count: 386]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MT29F4G08ABADAH4-ITE:D dalam solusi teknis

  1. What is the MT29F4G08ABADAH4-ITE:D?

    • The MT29F4G08ABADAH4-ITE:D is a NAND flash memory device commonly used in embedded systems and other technical solutions.

  2. What are the key features of the MT29F4G08ABADAH4-ITE:D?

    • The key features of this NAND flash memory include a capacity of 4Gb, a supply voltage range of 2.7V to 3.6V, and support for various interface options such as ONFI 2.3 and Toggle 2.0.

  3. How can the MT29F4G08ABADAH4-ITE:D be integrated into a technical solution?

    • The MT29F4G08ABADAH4-ITE:D can be integrated into a technical solution by connecting it to a suitable controller or processor using the supported interface protocols.

  4. What are the typical applications of the MT29F4G08ABADAH4-ITE:D?

    • Typical applications of this NAND flash memory include solid-state drives (SSDs), digital cameras, set-top boxes, and other embedded systems requiring non-volatile storage.

  5. What are the performance specifications of the MT29F4G08ABADAH4-ITE:D?

    • The performance specifications include fast program and erase times, high reliability, and support for various operational modes to optimize read and write operations.

  6. Are there any specific design considerations when using the MT29F4G08ABADAH4-ITE:D?

    • Design considerations may include proper signal integrity, power supply decoupling, and adherence to recommended operating conditions to ensure reliable operation.

  7. What are the potential challenges when integrating the MT29F4G08ABADAH4-ITE:D into a technical solution?

    • Challenges may include managing wear leveling, implementing error correction codes, and optimizing data management algorithms to maximize the lifespan and performance of the NAND flash memory.

  8. Does the MT29F4G08ABADAH4-ITE:D support security features?

    • The MT29F4G08ABADAH4-ITE:D may support security features such as hardware-based data protection and secure erase mechanisms, depending on the specific implementation.

  9. What are the recommended operating conditions for the MT29F4G08ABADAH4-ITE:D?

    • Recommended operating conditions typically include temperature ranges, voltage levels, and timing parameters that must be adhered to for proper functionality and longevity of the NAND flash memory.

  10. Where can I find detailed technical documentation for the MT29F4G08ABADAH4-ITE:D?

    • Detailed technical documentation, including datasheets and application notes, can be obtained from the manufacturer's website or authorized distributors.