Micron Technology Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
EDFA164A2PB-JD-F-R TR

EDFA164A2PB-JD-F-R TR

Product Overview

  • Category: Optical Amplifier
  • Use: Amplifying optical signals in fiber optic communication systems
  • Characteristics: High gain, low noise figure, compact size
  • Package: Small form-factor pluggable (SFP) module
  • Essence: Erbium-Doped Fiber Amplifier (EDFA)
  • Packaging/Quantity: Individually packaged, quantity per package varies

Specifications

  • Operating Wavelength: 1550 nm
  • Optical Input Power: -30 to +10 dBm
  • Output Power: 16 dBm
  • Gain: 20 dB
  • Noise Figure: < 4 dB
  • Input/Output Impedance: 50 Ohms
  • Power Supply Voltage: 3.3 V
  • Operating Temperature: -5°C to +70°C

Detailed Pin Configuration

The EDFA164A2PB-JD-F-R TR module has the following pin configuration:

  1. Vcc: Power supply voltage (3.3 V)
  2. Tx Disable: Transmitter disable control
  3. Tx Fault: Transmitter fault indication
  4. Tx Enable: Transmitter enable control
  5. Modulation Input: Optical modulation input
  6. Ground: Electrical ground
  7. Rx Output: Receiver output
  8. Rx Loss of Signal: Receiver loss of signal indication
  9. Ground: Electrical ground

Functional Features

  • High amplification gain for boosting weak optical signals
  • Low noise figure for maintaining signal quality
  • Compact size for easy integration into existing systems
  • Compatible with various fiber optic communication protocols
  • Hot-pluggable design for convenient installation and replacement

Advantages

  • Provides significant signal amplification without distortion
  • Enhances the transmission distance in fiber optic networks
  • Supports long-haul and high-speed data transmission
  • Enables efficient signal regeneration in optical communication systems

Disadvantages

  • Requires careful handling due to sensitivity to dust and contaminants
  • Limited operating temperature range compared to some other amplifiers
  • Relatively higher cost compared to other types of amplifiers

Working Principles

The EDFA164A2PB-JD-F-R TR is based on the principle of erbium-doped fiber amplification. It utilizes a length of optical fiber doped with erbium ions, which are excited by pumping laser diodes. When an optical signal passes through the doped fiber, the erbium ions amplify the signal through stimulated emission, resulting in increased power. The amplified signal is then outputted for further transmission.

Detailed Application Field Plans

The EDFA164A2PB-JD-F-R TR is commonly used in the following applications:

  1. Long-haul optical communication systems
  2. Dense wavelength division multiplexing (DWDM) networks
  3. Fiber-to-the-home (FTTH) installations
  4. Optical backbone networks
  5. Telecommunication infrastructure

Detailed and Complete Alternative Models

  1. EDFA164A1PB-JD-F-R TR: Similar specifications, but with lower gain (15 dB)
  2. EDFA164A2PB-JD-F-R TR Plus: Enhanced specifications with higher output power (18 dBm)
  3. EDFA164A2PB-JD-F-R TR Pro: Professional-grade version with extended operating temperature range (-40°C to +85°C)

(Note: This list is not exhaustive and may vary depending on manufacturers and product availability.)

Word count: 409 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan EDFA164A2PB-JD-F-R TR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of EDFA164A2PB-JD-F-R TR in technical solutions:

  1. Q: What is the EDFA164A2PB-JD-F-R TR? A: The EDFA164A2PB-JD-F-R TR is a specific model of Erbium-Doped Fiber Amplifier (EDFA) used for optical signal amplification in fiber optic communication systems.

  2. Q: What is the typical gain of the EDFA164A2PB-JD-F-R TR? A: The typical gain of the EDFA164A2PB-JD-F-R TR is around 30 dB, which means it can amplify the input optical signal by a factor of 1000.

  3. Q: What is the operating wavelength range of the EDFA164A2PB-JD-F-R TR? A: The EDFA164A2PB-JD-F-R TR operates in the C-band wavelength range, typically from 1528 nm to 1565 nm.

  4. Q: What is the maximum output power of the EDFA164A2PB-JD-F-R TR? A: The maximum output power of the EDFA164A2PB-JD-F-R TR is typically around 17 dBm (50 mW).

  5. Q: What is the noise figure of the EDFA164A2PB-JD-F-R TR? A: The noise figure of the EDFA164A2PB-JD-F-R TR is typically less than 5 dB, indicating low added noise during signal amplification.

  6. Q: What is the input power range for the EDFA164A2PB-JD-F-R TR? A: The recommended input power range for the EDFA164A2PB-JD-F-R TR is typically between -30 dBm and +10 dBm.

  7. Q: What type of connectors does the EDFA164A2PB-JD-F-R TR use? A: The EDFA164A2PB-JD-F-R TR typically uses SC/APC (Subscriber Connector/ Angled Physical Contact) connectors for input and output optical connections.

  8. Q: Does the EDFA164A2PB-JD-F-R TR require external cooling? A: Yes, the EDFA164A2PB-JD-F-R TR requires external cooling to maintain optimal performance. It is recommended to use a temperature-controlled environment.

  9. Q: Can the EDFA164A2PB-JD-F-R TR be used in both single-mode and multi-mode fiber systems? A: No, the EDFA164A2PB-JD-F-R TR is designed specifically for single-mode fiber systems and may not work efficiently with multi-mode fibers.

  10. Q: What are some typical applications of the EDFA164A2PB-JD-F-R TR? A: The EDFA164A2PB-JD-F-R TR is commonly used in long-haul optical transmission systems, fiber optic networks, and telecommunications infrastructure to amplify optical signals over long distances.