Microchip Technology
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SY100ELT20VZG-TR
Lihat Detail Lembar Data

SY100ELT20VZG-TR

Product Overview

Category

SY100ELT20VZG-TR belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for signal transmission and processing.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Small package size

Package

SY100ELT20VZG-TR is available in a small surface mount package.

Essence

The essence of this product lies in its ability to provide high-speed signal transmission and processing capabilities while consuming minimal power.

Packaging/Quantity

SY100ELT20VZG-TR is typically packaged in reels containing a specific quantity of units, depending on the manufacturer's specifications.

Specifications

  • Operating Voltage Range: 2.375V to 3.8V
  • Input Voltage Range: -2.0V to VCC + 2.0V
  • Output Voltage Range: -2.0V to VCC + 2.0V
  • Maximum Clock Frequency: 1.5 GHz
  • Propagation Delay: 250 ps (typical)
  • Output Skew: 50 ps (typical)

Detailed Pin Configuration

SY100ELT20VZG-TR has the following pin configuration:

  1. VCC
  2. GND
  3. CLK
  4. D
  5. Q
  6. /Q

Functional Features

  • High-speed clocked flip-flop
  • Differential inputs and outputs
  • Emitter-coupled logic (ECL) compatible
  • Edge-triggered operation

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient signal processing.
  • Low power consumption contributes to energy efficiency.
  • Wide operating voltage range provides flexibility in various applications.
  • Small package size enables space-saving designs.

Disadvantages

  • Emitter-coupled logic (ECL) compatibility may limit its use in certain systems.
  • Limited availability of alternative models from different manufacturers.

Working Principles

SY100ELT20VZG-TR operates based on the principles of emitter-coupled logic (ECL). It utilizes differential inputs and outputs to achieve high-speed signal transmission and processing. The flip-flop design allows for edge-triggered operation, ensuring accurate data capture.

Detailed Application Field Plans

SY100ELT20VZG-TR finds applications in various fields, including:

  1. Telecommunications: Used in high-speed data transmission systems.
  2. Networking: Employed in network switches and routers for efficient signal processing.
  3. Industrial Automation: Integrated into control systems for precise timing and synchronization.
  4. Test and Measurement: Utilized in equipment for accurate signal analysis and generation.

Detailed and Complete Alternative Models

While SY100ELT20VZG-TR is a reliable component, there are alternative models available from different manufacturers that offer similar functionality. Some notable alternatives include:

  1. MC10ELT20: Manufactured by ON Semiconductor.
  2. 74FCT20: Produced by Integrated Device Technology (IDT).
  3. SN54ACT20: Offered by Texas Instruments.

These alternative models can be considered based on specific requirements and availability.

Word count: 409 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SY100ELT20VZG-TR dalam solusi teknis

  1. Question: What is the SY100ELT20VZG-TR?
    Answer: The SY100ELT20VZG-TR is a high-speed differential receiver designed for use in various technical solutions.

  2. Question: What is the operating voltage range of the SY100ELT20VZG-TR?
    Answer: The operating voltage range of the SY100ELT20VZG-TR is typically between -4.2V and -5.7V.

  3. Question: What is the maximum data rate supported by the SY100ELT20VZG-TR?
    Answer: The SY100ELT20VZG-TR can support data rates up to 3.8 Gbps.

  4. Question: Can the SY100ELT20VZG-TR be used in both single-ended and differential applications?
    Answer: No, the SY100ELT20VZG-TR is specifically designed for differential applications.

  5. Question: What is the input common-mode voltage range of the SY100ELT20VZG-TR?
    Answer: The input common-mode voltage range of the SY100ELT20VZG-TR is typically between -2V and -4V.

  6. Question: Does the SY100ELT20VZG-TR have built-in termination resistors?
    Answer: No, the SY100ELT20VZG-TR does not have built-in termination resistors. External termination resistors are required.

  7. Question: Can the SY100ELT20VZG-TR be used in high-speed communication systems?
    Answer: Yes, the SY100ELT20VZG-TR is suitable for high-speed communication systems such as data transmission and clock distribution.

  8. Question: What is the power supply voltage required for the SY100ELT20VZG-TR?
    Answer: The power supply voltage required for the SY100ELT20VZG-TR is typically between -4.2V and -5.7V.

  9. Question: Is the SY100ELT20VZG-TR compatible with other logic families?
    Answer: Yes, the SY100ELT20VZG-TR is compatible with various logic families such as ECL, PECL, and LVPECL.

  10. Question: Can the SY100ELT20VZG-TR be used in industrial applications?
    Answer: Yes, the SY100ELT20VZG-TR is suitable for use in industrial applications that require high-speed data transmission and reliable performance.