Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SST38VF6402B-70-5I-EKE

SST38VF6402B-70-5I-EKE

Product Overview

Category

The SST38VF6402B-70-5I-EKE belongs to the category of non-volatile memory devices.

Use

This product is primarily used for data storage in various electronic devices, such as computers, smartphones, and embedded systems.

Characteristics

  • Non-volatile: The SST38VF6402B-70-5I-EKE retains stored data even when power is removed.
  • High capacity: This device has a storage capacity of 64 megabits (8 megabytes).
  • Fast access time: With a speed of 70 nanoseconds, it allows for quick retrieval of stored data.
  • Low power consumption: The SST38VF6402B-70-5I-EKE operates efficiently with low power requirements.
  • Wide temperature range: It can function reliably in temperatures ranging from -40°C to 85°C.

Package

The SST38VF6402B-70-5I-EKE comes in a compact and durable package, designed to protect the memory chip from external damage. The package type is an Integrated Circuit (IC) package.

Essence

The essence of this product lies in its ability to provide reliable and high-capacity non-volatile memory storage for electronic devices.

Packaging/Quantity

The SST38VF6402B-70-5I-EKE is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per package may vary, but it is commonly available in bulk quantities suitable for mass production.

Specifications

  • Memory Type: Flash
  • Memory Size: 64 Megabits (8 Megabytes)
  • Access Time: 70 ns
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: Integrated Circuit (IC) package

Detailed Pin Configuration

The SST38VF6402B-70-5I-EKE has a total of 48 pins. The pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. A0-A18 - Address inputs
  4. DQ0-DQ7 - Data input/output lines
  5. WE# - Write enable
  6. CE# - Chip enable
  7. OE# - Output enable
  8. RP# - Reset/Protection
  9. WP# - Write protect
  10. RY/BY# - Ready/busy status output

(Note: This is a simplified representation of the pin configuration. Please refer to the datasheet for the complete pinout details.)

Functional Features

  • High-speed data transfer: The SST38VF6402B-70-5I-EKE supports fast read and write operations, allowing for efficient data transfer.
  • Sector erase capability: It enables selective erasure of specific memory sectors, providing flexibility in managing stored data.
  • Built-in protection mechanisms: The device incorporates various protection features, such as write protection and reset functions, to ensure data integrity and prevent unauthorized access.
  • Compatibility: The SST38VF6402B-70-5I-EKE is designed to be compatible with industry-standard interfaces and protocols, making it easy to integrate into existing systems.

Advantages and Disadvantages

Advantages

  • High storage capacity
  • Fast access time
  • Low power consumption
  • Wide temperature range operation
  • Sector erase capability for flexible data management
  • Built-in protection mechanisms for data integrity

Disadvantages

  • Limited endurance: Flash memory devices have a limited number of erase/write cycles before they may become unreliable.
  • Higher cost compared to other types of memory technologies.

Working Principles

The SST38VF6402B-70-5I-EKE utilizes flash memory technology, which is based on the principle of storing data in floating-gate transistors. These transistors can retain their charge even when power is removed, allowing for non-volatile storage.

When data needs to be written, an electrical charge is applied to the floating gate, altering its state and storing the desired information. To read the stored data, the charge level of the floating gate is measured, determining the stored value.

Detailed Application Field Plans

The SST38VF6402B-70-5I-EKE finds applications in various electronic devices and systems, including but not limited to: - Computers and laptops - Smartphones and tablets - Automotive electronics - Industrial control systems - Medical devices - Consumer electronics

Its high capacity, fast access time, and reliability make it suitable for storing firmware, operating systems, application code, and other critical data in these applications.

Detailed and Complete Alternative Models

  • SST39VF6401B-70-4C-EKE: Similar to the SST38VF6402B-70-

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SST38VF6402B-70-5I-EKE dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of SST38VF6402B-70-5I-EKE in technical solutions:

  1. Q: What is the maximum operating frequency of the SST38VF6402B-70-5I-EKE? A: The maximum operating frequency of this device is 70 MHz.

  2. Q: What is the storage capacity of the SST38VF6402B-70-5I-EKE? A: This device has a storage capacity of 64 megabits (8 megabytes).

  3. Q: Can I use this flash memory for data storage in an embedded system? A: Yes, the SST38VF6402B-70-5I-EKE is commonly used for data storage in various embedded systems.

  4. Q: Does this flash memory support both read and write operations? A: Yes, the SST38VF6402B-70-5I-EKE supports both read and write operations.

  5. Q: What is the operating voltage range for this flash memory? A: The operating voltage range for this device is typically between 2.7V and 3.6V.

  6. Q: Is the SST38VF6402B-70-5I-EKE compatible with SPI (Serial Peripheral Interface)? A: Yes, this flash memory uses the SPI interface for communication.

  7. Q: Can I use this flash memory in automotive applications? A: Yes, the SST38VF6402B-70-5I-EKE is designed to meet the requirements of automotive applications.

  8. Q: What is the typical endurance of this flash memory? A: The typical endurance of this device is specified as 100,000 program/erase cycles.

  9. Q: Does this flash memory have any built-in security features? A: Yes, the SST38VF6402B-70-5I-EKE includes several security features like software write protection and hardware protection.

  10. Q: Can I operate this flash memory in a wide temperature range? A: Yes, this device is designed to operate in a wide temperature range, typically from -40°C to +85°C.

Please note that these answers are based on general information about the SST38VF6402B-70-5I-EKE flash memory. For specific technical details, it's always recommended to refer to the datasheet or consult the manufacturer's documentation.