Microchip Technology
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MCP2561-H/P
Lihat Detail Lembar Data

MCP2561-H/P

Introduction

The MCP2561-H/P is a high-speed CAN transceiver designed for use in automotive and industrial applications. This device is part of the Microchip Technology Inc.'s product line and offers reliable communication between microcontrollers and the CAN bus.

Basic Information Overview

  • Category: High-Speed CAN Transceiver
  • Use: Facilitates communication between microcontrollers and the CAN bus in automotive and industrial applications.
  • Characteristics: High-speed operation, robustness, and reliability.
  • Package: PDIP-8, SOIC-8
  • Essence: Enabling seamless communication in CAN networks.
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature: -40°C to 125°C
  • Data Rate: Up to 1 Mbps
  • ESD Protection: ±8 kV HBM
  • Transmit Data Dominant Timeout: 128 µs
  • Receive Data Dominant Timeout: 160 µs

Detailed Pin Configuration

The MCP2561-H/P features an 8-pin configuration: 1. VDD 2. VSS 3. S 4. CANH 5. CANL 6. STB 7. RXD 8. TXD

Functional Features

  • High-Speed Operation: Supports data rates of up to 1 Mbps, enabling fast and efficient communication.
  • Robustness: Built-in ESD protection and other features ensure reliable performance in harsh environments.
  • Low Power Consumption: Designed for efficiency, minimizing power requirements in the system.
  • Standby Mode: Includes a low-power standby mode for reduced power consumption during idle periods.

Advantages and Disadvantages

Advantages

  • Reliable communication in high-speed CAN networks.
  • Robust design for durability in challenging environments.
  • Low power consumption for energy-efficient operation.

Disadvantages

  • Limited compatibility with lower-speed CAN networks.
  • Higher cost compared to standard transceivers.

Working Principles

The MCP2561-H/P operates by facilitating the transmission and reception of data between a microcontroller and the CAN bus. It ensures proper signal conditioning and protection, allowing for seamless communication in high-speed CAN networks.

Detailed Application Field Plans

The MCP2561-H/P is well-suited for various applications, including: - Automotive: Used in vehicle control systems, engine management, and infotainment systems. - Industrial Automation: Enables communication in industrial control systems and machinery. - Medical Devices: Facilitates data exchange in medical equipment and devices.

Detailed and Complete Alternative Models

  • MCP2562: Similar high-speed CAN transceiver with different pin configurations.
  • TJA1040: Alternative high-speed CAN transceiver from NXP Semiconductors.
  • SN65HVD255: High-speed CAN transceiver from Texas Instruments offering similar functionality.

In conclusion, the MCP2561-H/P is a versatile and reliable high-speed CAN transceiver suitable for demanding automotive and industrial applications, providing robust communication capabilities and ensuring seamless integration into CAN networks.

Word Count: 457

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MCP2561-H/P dalam solusi teknis

  1. What is the maximum data rate supported by MCP2561-H/P?
    - The maximum data rate supported by MCP2561-H/P is 1 Mbps.

  2. Can MCP2561-H/P be used in automotive applications?
    - Yes, MCP2561-H/P is suitable for use in automotive applications.

  3. What is the operating voltage range of MCP2561-H/P?
    - The operating voltage range of MCP2561-H/P is 4.5V to 5.5V.

  4. Is MCP2561-H/P compatible with CAN 2.0B and ISO 11898-2?
    - Yes, MCP2561-H/P is fully compatible with CAN 2.0B and ISO 11898-2 standards.

  5. Does MCP2561-H/P have built-in protection features?
    - Yes, MCP2561-H/P includes built-in protection features such as thermal shutdown and short-circuit protection.

  6. Can MCP2561-H/P be used in industrial control systems?
    - Yes, MCP2561-H/P is suitable for use in industrial control systems.

  7. What is the typical standby current consumption of MCP2561-H/P?
    - The typical standby current consumption of MCP2561-H/P is 10 µA.

  8. Is MCP2561-H/P available in a small form factor package?
    - Yes, MCP2561-H/P is available in a small 8-pin PDIP or SOIC package.

  9. Can MCP2561-H/P operate in harsh environments?
    - Yes, MCP2561-H/P is designed to operate reliably in harsh environments.

  10. Are there any application notes or reference designs available for MCP2561-H/P?
    - Yes, application notes and reference designs for MCP2561-H/P are available to assist with implementation in technical solutions.