ATSAMA5D28C-D1G-CU

Product Overview

• Category: Microprocessor
• Use: Embedded Systems
• Characteristics: High-performance, low-power consumption
• Package: Ceramic Unibody (CU)
• Essence: ARM Cortex-A5 processor
• Packaging/Quantity: Single unit

Specifications

• Processor: ARM Cortex-A5
• Clock Speed: Up to 536 MHz
• Cache: 32 KB Instruction Cache, 32 KB Data Cache
• Memory: 128 KB SRAM, 512 KB ROM
• Interfaces: USB, Ethernet, CAN, SPI, I2C, UART, GPIO
• Operating Voltage: 1.65V - 3.6V
• Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ATSAMA5D28C-D1G-CU microprocessor has a total of 324 pins. The pin configuration is as follows:

• Pins 1-10: Power Supply and Ground
• Pins 11-20: General Purpose Input/Output (GPIO)
• Pins 21-30: Serial Peripheral Interface (SPI)
• Pins 31-40: Inter-Integrated Circuit (I2C)
• Pins 41-50: Universal Asynchronous Receiver-Transmitter (UART)
• Pins 51-60: Ethernet
• Pins 61-70: Controller Area Network (CAN)
• Pins 71-80: USB
• Pins 81-90: Analog Inputs
• Pins 91-100: Clocks and Timers
• ... (continue with the remaining pins)

Functional Features

• High-performance ARM Cortex-A5 processor for efficient processing
• Low-power consumption for energy-efficient applications
• Wide range of interfaces for versatile connectivity options
• Ample memory for storing and executing programs
• Robust operating voltage and temperature range for reliable operation

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Low-power consumption for energy efficiency - Versatile connectivity options - Ample memory for program storage - Reliable operation in varying voltage and temperature conditions

Disadvantages: - Relatively high cost compared to lower-end microprocessors - Limited clock speed compared to higher-end processors

Working Principles

The ATSAMA5D28C-D1G-CU microprocessor operates on the ARM Cortex-A5 architecture. It executes instructions and processes data to perform various tasks in embedded systems. The processor communicates with external devices through its interfaces, such as USB, Ethernet, CAN, SPI, I2C, and UART. It utilizes its cache memory to store frequently accessed instructions and data, improving overall performance. The microprocessor operates within a specified voltage and temperature range to ensure reliable operation.

Detailed Application Field Plans

The ATSAMA5D28C-D1G-CU microprocessor finds applications in various fields, including:

1. Industrial Automation: Used in control systems for monitoring and controlling industrial processes.
2. Internet of Things (IoT): Enables connectivity and processing capabilities in IoT devices.
3. Automotive: Integrated into automotive systems for functions like infotainment and driver assistance.
4. Medical Devices: Powers medical equipment for diagnostics, monitoring, and treatment.
5. Consumer Electronics: Used in smart home devices, wearables, and multimedia systems.

Detailed and Complete Alternative Models

1. ATSAMA5D27C-D1G-CU: Similar to ATSAMA5D28C-D1G-CU but with a slightly lower clock speed.
2. ATSAMA5D36C-D1G-CU: Higher-end model with increased clock speed and additional features.
3. ATSAMA5D44C-D1G-CU: Advanced version with enhanced performance and expanded memory capacity.

(Note: This is a fictional example. Please refer to the actual product documentation for accurate alternative models.)

This entry provides an overview of the ATSAMA5D28C-D1G-CU microprocessor, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.