Microchip Technology
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
AT89C51RD2-RLRUM
Lihat Detail Lembar Data

AT89C51RD2-RLRUM

Product Overview

Category

The AT89C51RD2-RLRUM belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic applications that require embedded control systems.

Characteristics

  • High-performance 8-bit microcontroller
  • Incorporates Flash memory for program storage
  • Features a wide range of peripherals for versatile applications
  • Supports both serial and parallel communication interfaces

Package

The AT89C51RD2-RLRUM is available in a compact and industry-standard 40-pin Dual In-Line Package (DIP).

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control capabilities for a wide range of electronic devices and systems.

Packaging/Quantity

The AT89C51RD2-RLRUM is typically packaged in reels, with each reel containing a specific quantity of microcontrollers. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 33 MHz
  • Program Memory Size: 64 KB
  • RAM Size: 2 KB
  • Number of I/O Pins: 32
  • Timers/Counters: 3
  • Serial Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The AT89C51RD2-RLRUM microcontroller has a total of 40 pins. Here is a detailed pin configuration:

  1. P0.0 - Port 0, Pin 0
  2. P0.1 - Port 0, Pin 1
  3. P0.2 - Port 0, Pin 2
  4. P0.3 - Port 0, Pin 3
  5. P0.4 - Port 0, Pin 4
  6. P0.5 - Port 0, Pin 5
  7. P0.6 - Port 0, Pin 6
  8. P0.7 - Port 0, Pin 7
  9. RST - Reset Pin
  10. P1.0 - Port 1, Pin 0
  11. P1.1 - Port 1, Pin 1
  12. P1.2 - Port 1, Pin 2
  13. P1.3 - Port 1, Pin 3
  14. P1.4 - Port 1, Pin 4
  15. P1.5 - Port 1, Pin 5
  16. P1.6 - Port 1, Pin 6
  17. P1.7 - Port 1, Pin 7
  18. XTAL1 - Crystal Oscillator Input
  19. XTAL2 - Crystal Oscillator Output
  20. GND - Ground
  21. VCC - Power Supply
  22. P2.0 - Port 2, Pin 0
  23. P2.1 - Port 2, Pin 1
  24. P2.2 - Port 2, Pin 2
  25. P2.3 - Port 2, Pin 3
  26. P2.4 - Port 2, Pin 4
  27. P2.5 - Port 2, Pin 5
  28. P2.6 - Port 2, Pin 6
  29. P2.7 - Port 2, Pin 7
  30. ALE/PROG - Address Latch Enable/Program Pulse
  31. PSEN - Program Store Enable
  32. EA/VPP - External Access Enable/Voltage Programming Pin
  33. P3.0 - Port 3, Pin 0
  34. P3.1 - Port 3, Pin 1
  35. P3.2 - Port 3, Pin 2
  36. P3.3 - Port 3, Pin 3
  37. P3.4 - Port 3, Pin 4
  38. P3.5 - Port 3, Pin 5
  39. P3.6 - Port 3, Pin 6
  40. P3.7 - Port 3, Pin 7

Functional Features

The AT89C51RD2-RLRUM microcontroller offers several functional features, including:

  • High-performance CPU with efficient instruction set
  • Flash memory for program storage and easy reprogramming
  • On-chip peripherals such as timers/counters, UART, SPI, and I2C interfaces
  • Analog-to-Digital Converter (ADC) for precise analog signal measurements
  • Interrupt capability for real-time event handling
  • Low-power consumption for energy-efficient applications

Advantages and Disadvantages

Advantages

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan AT89C51RD2-RLRUM dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of AT89C51RD2-RLRUM in technical solutions:

  1. Q: What is the AT89C51RD2-RLRUM microcontroller used for? A: The AT89C51RD2-RLRUM is a popular microcontroller used for various embedded applications, including industrial automation, consumer electronics, and automotive systems.

  2. Q: What is the maximum clock frequency supported by the AT89C51RD2-RLRUM? A: The AT89C51RD2-RLRUM can operate at a maximum clock frequency of 33 MHz.

  3. Q: How much program memory does the AT89C51RD2-RLRUM have? A: The AT89C51RD2-RLRUM has 64 KB of Flash program memory.

  4. Q: Can I expand the program memory of the AT89C51RD2-RLRUM? A: No, the program memory of the AT89C51RD2-RLRUM cannot be expanded beyond its built-in 64 KB capacity.

  5. Q: How many I/O pins are available on the AT89C51RD2-RLRUM? A: The AT89C51RD2-RLRUM has a total of 32 I/O pins.

  6. Q: Does the AT89C51RD2-RLRUM support analog inputs? A: No, the AT89C51RD2-RLRUM does not have built-in analog-to-digital converters (ADCs), so it does not directly support analog inputs.

  7. Q: Can I use the AT89C51RD2-RLRUM for real-time applications? A: Yes, the AT89C51RD2-RLRUM has built-in timers and interrupts that can be used for real-time applications.

  8. Q: What programming languages can I use to program the AT89C51RD2-RLRUM? A: The AT89C51RD2-RLRUM can be programmed using assembly language or high-level languages like C.

  9. Q: Is the AT89C51RD2-RLRUM compatible with other microcontrollers? A: The AT89C51RD2-RLRUM follows the 8051 architecture, so it is generally compatible with other 8051-based microcontrollers.

  10. Q: Can I use the AT89C51RD2-RLRUM in battery-powered applications? A: Yes, the AT89C51RD2-RLRUM has low power consumption features, making it suitable for battery-powered applications.

Please note that these answers are general and may vary depending on specific application requirements and configurations.