Micro Commercial Co
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
3EZ15D5-TP
Lihat Detail Lembar Data

3EZ15D5-TP Product Overview

Introduction

The 3EZ15D5-TP is a semiconductor product belonging to the category of voltage regulator diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diode
  • Use: Voltage regulation in electronic circuits
  • Characteristics: High precision, low leakage current, and stable performance
  • Package: Through-hole or surface mount
  • Essence: Ensures a constant output voltage despite variations in input voltage
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Part Number: 3EZ15D5-TP
  • Voltage - Zener (Nom) (Vz): 15V
  • Power Dissipation (Max): 1.5W
  • Impedance (Max) (Zzt): 10 Ohm
  • Current - Reverse Leakage @ Vr: 5µA @ 11V
  • Operating Temperature: -65°C ~ 200°C

Detailed Pin Configuration

The 3EZ15D5-TP typically consists of two pins, with the cathode connected to the ground and the anode connected to the input voltage source.

Functional Features

  • Voltage Regulation: Maintains a constant output voltage despite fluctuations in the input voltage.
  • Overvoltage Protection: Safeguards connected components from damage due to excessive voltage.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low leakage current
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Susceptible to voltage spikes

Working Principles

The 3EZ15D5-TP operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased.

Detailed Application Field Plans

The 3EZ15D5-TP finds extensive use in various electronic circuits requiring stable voltage regulation. Common applications include: - Power supplies - Voltage reference circuits - Battery management systems

Detailed and Complete Alternative Models

  • 3EZ12D5-TP: 12V Zener voltage, similar characteristics
  • 3EZ18D5-TP: 18V Zener voltage, similar characteristics
  • 3EZ20D5-TP: 20V Zener voltage, similar characteristics

In conclusion, the 3EZ15D5-TP is a vital component in electronic circuits requiring precise voltage regulation and overvoltage protection. Its stable performance, low leakage current, and wide operating temperature range make it a preferred choice for various applications.

[Word Count: 366]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 3EZ15D5-TP dalam solusi teknis

  1. What is 3EZ15D5-TP?

    • 3EZ15D5-TP is a type of diode, specifically a 3A surface mount glass passivated rectifier with a voltage rating of 50V.

  2. What are the typical applications of 3EZ15D5-TP?

    • It is commonly used in power supplies, converters, and other electronic equipment where high-speed switching is required.

  3. What are the key features of 3EZ15D5-TP?

    • Some key features include its low forward voltage drop, high current capability, and fast reverse recovery time.

  4. What are the operating temperature and storage temperature ranges for 3EZ15D5-TP?

    • The operating temperature range is typically -65°C to +175°C, while the storage temperature range is usually -65°C to +175°C.

  5. What are the recommended soldering conditions for 3EZ15D5-TP?

    • It is recommended to use a soldering iron with a power rating of 25W or less, with a soldering temperature of 260°C for 10 seconds.

  6. What are the potential failure modes for 3EZ15D5-TP?

    • Common failure modes include thermal runaway, reverse voltage breakdown, and solder joint fatigue under mechanical stress.

  7. Can 3EZ15D5-TP be used in automotive applications?

    • Yes, it can be used in automotive electronics, provided it meets the necessary automotive industry standards and specifications.

  8. What are the packaging options available for 3EZ15D5-TP?

    • It is typically available in a surface mount package, such as the SMB (DO-214AA) package.

  9. What are the important parameters to consider when designing with 3EZ15D5-TP?

    • Parameters such as maximum forward voltage, reverse leakage current, and junction capacitance are crucial for design considerations.

  10. Are there any specific layout or PCB design recommendations for 3EZ15D5-TP?

    • It is important to minimize trace lengths, provide adequate thermal relief for solder connections, and ensure proper heat sinking for efficient operation.