The MAX881REUB+ has the following pin configuration:
Advantages: - High efficiency ensures optimal power usage - Low quiescent current prolongs battery life - Small package size allows for compact designs - Thermal shutdown and protection features enhance reliability
Disadvantages: - Limited output current capacity (up to 150mA) - Input voltage range is restricted to 2.5V to 5.5V
The MAX881REUB+ is a voltage regulator IC that converts an input voltage within the range of 2.5V to 5.5V into a regulated output voltage between 1.25V and 5.5V. It achieves high efficiency by utilizing a low-dropout (LDO) architecture. The enable input allows for power management control, enabling the device to be turned on or off as needed. The IC also incorporates various protection features such as thermal shutdown, short-circuit, and reverse polarity protection.
The MAX881REUB+ is widely used in various portable electronic devices where efficient power management is crucial. Some common application fields include:
These alternative models provide flexibility and options based on specific requirements.
Word Count: 275 words
Sure! Here are 10 common questions and answers related to the application of MAX881REUB+ in technical solutions:
Question: What is the maximum input voltage for MAX881REUB+?
Answer: The maximum input voltage for MAX881REUB+ is 5.5V.
Question: What is the output current capability of MAX881REUB+?
Answer: MAX881REUB+ can provide an output current of up to 500mA.
Question: Can MAX881REUB+ be used as a voltage regulator?
Answer: Yes, MAX881REUB+ is a low-dropout (LDO) linear voltage regulator.
Question: What is the dropout voltage of MAX881REUB+?
Answer: The dropout voltage of MAX881REUB+ is typically 120mV at 100mA load.
Question: Is MAX881REUB+ suitable for battery-powered applications?
Answer: Yes, MAX881REUB+ is designed for low-power applications and is suitable for battery-powered devices.
Question: Does MAX881REUB+ have built-in thermal shutdown protection?
Answer: Yes, MAX881REUB+ features thermal shutdown protection to prevent overheating.
Question: Can MAX881REUB+ operate in a wide temperature range?
Answer: Yes, MAX881REUB+ can operate in a temperature range of -40°C to +85°C.
Question: Does MAX881REUB+ require any external components for operation?
Answer: Yes, MAX881REUB+ requires a few external components such as input/output capacitors and resistors for stability.
Question: Can MAX881REUB+ handle short-circuit conditions?
Answer: Yes, MAX881REUB+ has built-in current limit protection to handle short-circuit conditions.
Question: Is MAX881REUB+ available in a small package?
Answer: Yes, MAX881REUB+ is available in a space-saving 10-pin µMAX package.
Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.