Maxim Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MAX6519UKP115+T
Lihat Detail Lembar Data

MAX6519UKP115+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Temperature Sensor
  • Characteristics: High accuracy, low power consumption
  • Package: 8-pin µMAX
  • Essence: Monitors and reports temperature
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Temperature Range: -40°C to +125°C
  • Accuracy: ±1.5°C (max) from -20°C to +100°C
  • Supply Voltage: 2.7V to 5.5V
  • Current Consumption: 45µA (typ)

Detailed Pin Configuration

  1. GND
  2. VCC
  3. ALERT
  4. SCL
  5. SDA
  6. NC
  7. GND
  8. TEMP_OUT

Functional Features

  • Digital output
  • I2C interface
  • Programmable temperature threshold
  • Low standby current
  • Small form factor

Advantages and Disadvantages

Advantages

  • High accuracy over a wide temperature range
  • Low power consumption
  • Small package size
  • Easy interfacing with microcontrollers

Disadvantages

  • Limited temperature range compared to some alternatives
  • Requires external pull-up resistors for I2C communication

Working Principles

The MAX6519UKP115+T is based on the principle of using a bandgap temperature sensor to accurately measure the device's die temperature. It then converts this temperature into a digital output using an analog-to-digital converter (ADC). The I2C interface allows easy communication with a microcontroller or other digital devices.

Detailed Application Field Plans

The MAX6519UKP115+T is suitable for various applications where accurate temperature monitoring is essential, such as: - Industrial control systems - Consumer electronics - Automotive systems - Medical devices - HVAC (Heating, Ventilation, and Air Conditioning) equipment

Detailed and Complete Alternative Models

Some alternative models to the MAX6519UKP115+T include: - LM75: Digital temperature sensor with similar accuracy and I2C interface - TMP36: Analog temperature sensor with wider temperature range but lower accuracy - DS18B20: Digital temperature sensor with 1-wire interface and higher temperature range

In conclusion, the MAX6519UKP115+T is a highly accurate and low-power temperature sensor suitable for a wide range of applications, especially those requiring precise temperature monitoring within a limited range.

[Word Count: 341]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MAX6519UKP115+T dalam solusi teknis

  1. What is the MAX6519UKP115+T?

    • The MAX6519UKP115+T is a precision analog-output temperature sensor with an I2C-compatible serial interface.

  2. What is the operating temperature range of the MAX6519UKP115+T?

    • The operating temperature range of the MAX6519UKP115+T is -40°C to +125°C.

  3. How accurate is the temperature measurement of the MAX6519UKP115+T?

    • The MAX6519UKP115+T has a typical accuracy of ±1.5°C over the entire temperature range.

  4. What is the supply voltage range for the MAX6519UKP115+T?

    • The supply voltage range for the MAX6519UKP115+T is 2.7V to 5.5V.

  5. Can the MAX6519UKP115+T be used in automotive applications?

    • Yes, the MAX6519UKP115+T is suitable for automotive applications due to its wide operating temperature range.

  6. Does the MAX6519UKP115+T require external calibration?

    • No, the MAX6519UKP115+T does not require external calibration as it is factory calibrated.

  7. What is the resolution of the temperature output from the MAX6519UKP115+T?

    • The MAX6519UKP115+T provides a 12-bit digital temperature output with a resolution of 0.0625°C per LSB.

  8. Is the MAX6519UKP115+T compatible with microcontrollers and digital signal processors (DSPs)?

    • Yes, the MAX6519UKP115+T features an I2C-compatible serial interface, making it compatible with microcontrollers and DSPs.

  9. Can the MAX6519UKP115+T be used in battery-powered applications?

    • Yes, the low supply voltage range of 2.7V to 5.5V makes the MAX6519UKP115+T suitable for battery-powered applications.

  10. What are some typical applications for the MAX6519UKP115+T?

    • Typical applications for the MAX6519UKP115+T include temperature monitoring and control in industrial, automotive, and consumer electronic systems.