Meixin Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MAX5991BETP+T
Lihat Detail Lembar Data

MAX5991BETP+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power over Ethernet (PoE) Controller
  • Characteristics: High efficiency, compact size, advanced features
  • Package: 20-pin TQFN (Thin Quad Flat No-Lead) package
  • Essence: Provides power and control for PoE applications
  • Packaging/Quantity: Tape and reel packaging, 2500 units per reel

Specifications

  • Input Voltage Range: 36V to 57V
  • Output Voltage Range: 3.3V to 5.5V
  • Maximum Output Current: 600mA
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 92%
  • Protection Features: Overcurrent, overvoltage, and thermal shutdown

Detailed Pin Configuration

The MAX5991BETP+T has a total of 20 pins. The pin configuration is as follows:

  1. VDD: Power supply input
  2. GND: Ground reference
  3. EN: Enable pin for controlling the device
  4. FLT: Fault indicator output
  5. VOUT: Output voltage pin
  6. PGND: Power ground reference
  7. FB: Feedback pin for voltage regulation
  8. NC: No connection
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection

Functional Features

  • Integrated high-efficiency DC-DC converter
  • Supports IEEE 802.3af/at compliant PoE applications
  • Provides power and control for PoE devices
  • Advanced protection features ensure safe operation
  • Compact size allows for space-saving designs

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption - Compact size enables smaller form factor designs - Advanced protection features enhance system reliability - Supports IEEE 802.3af/at standards for compatibility

Disadvantages: - Limited output current may not be suitable for high-power applications - Higher cost compared to non-PoE power solutions

Working Principles

The MAX5991BETP+T is a PoE controller that integrates a high-efficiency DC-DC converter. It operates by receiving an input voltage within the range of 36V to 57V and converting it to a regulated output voltage between 3.3V and 5.5V. The device provides power and control for PoE applications, allowing for the transmission of both data and power over Ethernet cables.

Detailed Application Field Plans

The MAX5991BETP+T is commonly used in various PoE applications, including:

  1. IP Cameras: Provides power and control for surveillance cameras over Ethernet cables.
  2. Wireless Access Points: Enables power delivery to wireless networking devices.
  3. VoIP Phones: Supplies power to Voice over IP phones for seamless communication.
  4. Network Switches: Facilitates power distribution to network switches for efficient operation.
  5. Industrial Automation: Powers and controls various industrial devices through Ethernet connectivity.

Detailed and Complete Alternative Models

  1. MAX5969AETM+: Similar PoE controller with higher output current capability (up to 800mA).
  2. LTC4267IGN#PBF: PoE controller with advanced power management features and extended temperature range.
  3. TPS23754PWPR: Integrated PoE controller with built-in protection features and adjustable output voltage.

(Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's documentation for a complete list of alternatives.)

Word count: 452 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MAX5991BETP+T dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MAX5991BETP+T in technical solutions:

Q1: What is the MAX5991BETP+T? A1: The MAX5991BETP+T is a power-over-Ethernet (PoE) controller designed for use in various technical solutions.

Q2: What is the maximum input voltage supported by the MAX5991BETP+T? A2: The MAX5991BETP+T supports a maximum input voltage of 57V.

Q3: How many PoE ports can be controlled by the MAX5991BETP+T? A3: The MAX5991BETP+T can control up to 8 PoE ports.

Q4: What is the maximum current that can be delivered per port by the MAX5991BETP+T? A4: The MAX5991BETP+T can deliver a maximum current of 600mA per port.

Q5: Can the MAX5991BETP+T support both IEEE 802.3af and IEEE 802.3at standards? A5: Yes, the MAX5991BETP+T supports both IEEE 802.3af and IEEE 802.3at standards.

Q6: Does the MAX5991BETP+T have built-in thermal protection? A6: Yes, the MAX5991BETP+T has built-in thermal protection to prevent overheating.

Q7: Can the MAX5991BETP+T operate in a wide temperature range? A7: Yes, the MAX5991BETP+T can operate in a temperature range of -40°C to +85°C.

Q8: Is the MAX5991BETP+T compatible with various Ethernet speeds? A8: Yes, the MAX5991BETP+T is compatible with 10Mbps, 100Mbps, and 1000Mbps Ethernet speeds.

Q9: Can the MAX5991BETP+T be used in both indoor and outdoor applications? A9: Yes, the MAX5991BETP+T can be used in both indoor and outdoor applications.

Q10: Does the MAX5991BETP+T support advanced power management features? A10: Yes, the MAX5991BETP+T supports advanced power management features such as power prioritization and power budgeting.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.