Meixin Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MAX5954AETX+T
Lihat Detail Lembar Data

MAX5954AETX+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-efficiency, programmable current-sinking LED driver
  • Package: 36-pin TQFN (Thin Quad Flat No-Lead) package
  • Essence: Provides a compact and efficient solution for driving multiple LEDs in various applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Current Range: Up to 100mA per channel
  • Number of Channels: 16
  • Dimming Control: PWM (Pulse Width Modulation)
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Protection Features: Overvoltage, undervoltage, overtemperature, and short-circuit protection

Detailed Pin Configuration

The MAX5954AETX+T features a 36-pin TQFN package with the following pin configuration:

  1. EN (Enable)
  2. VCC (Power Supply)
  3. GND (Ground)
  4. SDI (Serial Data Input)
  5. SDO (Serial Data Output)
  6. SCLK (Serial Clock)
  7. CS (Chip Select)
  8. RST (Reset)
  9. INT (Interrupt)
  10. FAULT (Fault Indicator) 11-26. LED1-LED16 (LED Channel Outputs) 27-36. NC (No Connection)

Functional Features

  • High integration: The MAX5954AETX+T integrates 16 LED channels, reducing external component count.
  • Programmable current sinking: Each LED channel can be individually programmed to sink up to 100mA of current.
  • PWM dimming control: Allows precise brightness control by adjusting the duty cycle of the PWM signal.
  • Fault detection: The device provides a fault indicator (FAULT) to detect overvoltage, undervoltage, and overtemperature conditions.

Advantages and Disadvantages

Advantages: - High efficiency, reducing power consumption - Compact package size for space-constrained applications - Individual channel control allows flexibility in LED configurations - Comprehensive protection features ensure reliable operation

Disadvantages: - Limited output current per channel may not be suitable for high-power LED applications - Requires external microcontroller or host system for configuration and control

Working Principles

The MAX5954AETX+T is a programmable current-sinking LED driver. It utilizes a serial interface to communicate with an external microcontroller or host system. The microcontroller sends commands to configure the desired current level and dimming settings for each LED channel.

The device uses a high-efficiency buck converter to regulate the input voltage and provide constant current sinking for the LEDs. The PWM dimming control adjusts the duty cycle of the LED current, allowing precise brightness control.

Detailed Application Field Plans

The MAX5954AETX+T is suitable for various applications that require driving multiple LEDs, such as:

  1. Automotive lighting systems: Provides efficient and flexible LED driving for interior and exterior lighting applications in vehicles.
  2. Display backlighting: Enables uniform and adjustable backlighting for LCD panels in consumer electronics devices.
  3. Architectural lighting: Offers programmable LED control for decorative and accent lighting in buildings and structures.
  4. Industrial automation: Facilitates LED illumination in industrial equipment and machinery for status indication and visual feedback.

Detailed and Complete Alternative Models

  1. MAX16834: High-voltage, high-brightness LED driver with integrated boost converter.
  2. TLC5940: 16-channel LED driver with grayscale control and built-in error detection.
  3. LT3595: Triple-output LED driver with integrated boost and buck converters for driving RGB LEDs.

These alternative models provide similar functionality to the MAX5954AETX+T and can be considered based on specific application requirements.

Word count: 529 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MAX5954AETX+T dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MAX5954AETX+T in technical solutions:

1. What is the MAX5954AETX+T? The MAX5954AETX+T is a power-over-Ethernet (PoE) controller designed for use in network devices that require both data and power over a single Ethernet cable.

2. What is the maximum power output of the MAX5954AETX+T? The MAX5954AETX+T can deliver up to 13W of power to the connected device.

3. Can the MAX5954AETX+T be used with any Ethernet switch? Yes, the MAX5954AETX+T is compatible with standard Ethernet switches that support the IEEE 802.3af/at PoE standards.

4. How many devices can be powered simultaneously using the MAX5954AETX+T? The MAX5954AETX+T can power up to four devices simultaneously.

5. Does the MAX5954AETX+T support power management features? Yes, the MAX5954AETX+T includes various power management features such as overcurrent protection, thermal shutdown, and under-voltage lockout.

6. What is the input voltage range for the MAX5954AETX+T? The MAX5954AETX+T operates from an input voltage range of 36V to 57V.

7. Can the MAX5954AETX+T provide power to devices that require higher voltages? No, the MAX5954AETX+T is designed to provide power at the standard PoE voltage levels of 48V.

8. Is the MAX5954AETX+T suitable for outdoor applications? Yes, the MAX5954AETX+T is designed to operate in a wide temperature range and can be used in outdoor applications.

9. Does the MAX5954AETX+T support power classification? Yes, the MAX5954AETX+T supports power classification based on the IEEE 802.3af/at standards.

10. Can the MAX5954AETX+T be used in non-PoE applications? Yes, the MAX5954AETX+T can also be used in non-PoE applications as a general-purpose power controller.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.