Meixin Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MAX31091AUA/V+192
Lihat Detail Lembar Data

MAX31091AUA/V+192

Overview

  • Category: Integrated Circuit
  • Use: UART Transceiver
  • Characteristics:
    • High-speed, full-duplex communication
    • Low power consumption
    • Small form factor
  • Package: TSSOP-16
  • Essence: Serial Communication Interface
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications and Parameters

  • Supply Voltage Range: 1.71V to 3.6V
  • Data Rate: Up to 3Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 1
  • Interface Standards: UART, IrDA
  • RoHS Compliant: Yes

Pin Configuration

The MAX31091AUA/V+192 features a TSSOP-16 package with the following pin configuration:

| Pin No. | Name | Description | |---------|------|-------------| | 1 | VCC | Power Supply | | 2 | GND | Ground | | 3 | RX | Receive Data Input | | 4 | TX | Transmit Data Output | | 5 | RTS | Request to Send | | 6 | CTS | Clear to Send | | 7 | IRQ | Interrupt Request | | 8 | SCL | Serial Clock | | 9 | SDA | Serial Data | | 10 | AD0 | Address Bit 0 | | 11 | AD1 | Address Bit 1 | | 12 | AD2 | Address Bit 2 | | 13 | AD3 | Address Bit 3 | | 14 | AD4 | Address Bit 4 | | 15 | AD5 | Address Bit 5 | | 16 | AD6 | Address Bit 6 |

Functional Characteristics

The MAX31091AUA/V+192 is a highly integrated UART transceiver with the following functional characteristics:

  • Full-duplex communication
  • Automatic baud rate detection
  • Programmable FIFO buffers
  • IrDA mode support
  • Hardware flow control (RTS/CTS)
  • Interrupt-driven operation
  • Low-power sleep mode

Advantages and Disadvantages

Advantages: - High-speed communication - Low power consumption - Small form factor - Flexible addressing options

Disadvantages: - Limited number of channels - Requires external crystal oscillator

Applicable Range of Products

The MAX31091AUA/V+192 is suitable for various applications that require reliable serial communication, such as: - Industrial automation - Internet of Things (IoT) devices - Medical equipment - Consumer electronics

Working Principles

The MAX31091AUA/V+192 operates based on the principles of UART (Universal Asynchronous Receiver Transmitter) communication. It receives and transmits data in a serial format using start and stop bits, allowing for asynchronous communication between devices.

Detailed Application Field Plans

  1. Industrial Automation: The MAX31091AUA/V+192 can be used in PLCs (Programmable Logic Controllers) to enable communication with various sensors and actuators.
  2. IoT Devices: This UART transceiver can facilitate data exchange between IoT devices, enabling seamless connectivity and control.
  3. Medical Equipment: The MAX31091AUA/V+192 can be utilized in medical devices like patient monitors and diagnostic equipment to transmit vital data reliably.
  4. Consumer Electronics: It can be integrated into consumer electronics products, such as smart home devices and wearable gadgets, to enable communication with other devices.

Detailed Alternative Models

  • MAX3109: UART transceiver with similar features but different package options.
  • MAX14830: Multi-channel UART transceiver with enhanced functionality.
  • MAX3232: RS-232 transceiver for legacy serial communication applications.

5 Common Technical Questions and Answers

  1. Q: What is the maximum data rate supported by the MAX31091AUA/V+192? A: The MAX31091AUA/V+192 supports data rates of up to 3Mbps.

  2. Q: Can I use this UART transceiver with a 5V supply voltage? A: No, the MAX31091AUA/V+192 operates within a supply voltage range of 1.71V to 3.6V.

  3. Q: Does the MAX31091AUA/V+192 support hardware flow control? A: Yes, it supports hardware flow control using RTS (Request to Send) and CTS (Clear to Send) signals.

  4. Q: Is the MAX31091AUA/V+192 RoHS compliant? A: Yes, it is RoHS compliant, ensuring environmental friendliness.

  5. Q: Can I use multiple MAX