Meixin Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MAX14745DEWX+T
Lihat Detail Lembar Data

MAX14745DEWX+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 14-WLP (Wafer Level Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1.5A
  • Quiescent Current: 17µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX14745DEWX+T has a total of 14 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator
  7. SS: Soft-Start Capacitor
  8. BST: Boost Pin
  9. LX: Switching Node
  10. AGND: Analog Ground
  11. PGND: Power Ground
  12. VDD: Supply Voltage
  13. VREF: Reference Voltage
  14. NC: No Connection

Functional Features

  • High Efficiency: The MAX14745DEWX+T offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a quiescent current of only 17µA, the IC ensures minimal power consumption during standby or low-load conditions.
  • Power Good Indicator: The PG pin provides a signal indicating when the output voltage is within the specified range, ensuring reliable operation.
  • Soft-Start Capacitor: The SS pin allows for a controlled startup, preventing excessive inrush current and voltage overshoot.
  • Enable Pin: The EN pin allows for easy on/off control of the IC, conserving power when not in use.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption during standby - Power good indicator for reliable operation - Controlled startup to prevent excessive inrush current

Disadvantages: - Limited output current capacity (maximum 1.5A) - Restricted input voltage range (2.7V to 5.5V)

Working Principles

The MAX14745DEWX+T is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves this through a combination of switching and control circuitry. The IC efficiently steps down the input voltage to provide a stable output voltage, ensuring proper operation of connected devices.

Detailed Application Field Plans

The MAX14745DEWX+T finds applications in various fields, including but not limited to:

  1. Portable Electronics: It can be used in smartphones, tablets, and portable gaming devices to regulate the voltage supplied to different components, such as processors, memory, and display modules.
  2. IoT Devices: The IC is suitable for IoT devices that require efficient power management, such as smart home sensors, wearable devices, and connected appliances.
  3. Industrial Automation: It can be utilized in industrial automation systems to regulate power supply for control circuits, sensors, and actuators.
  4. Automotive Electronics: The MAX14745DEWX+T can be employed in automotive applications, providing stable power to infotainment systems, lighting modules, and other electronic components.

Detailed and Complete Alternative Models

  1. MAX14746DEWX+T: Similar to MAX14745DEWX+T, but with a higher maximum output current of 2A.
  2. MAX14747DEWX+T: A variant with an extended input voltage range of 2.5V to 5.5V, suitable for applications with lower input voltages.
  3. MAX14748DEWX+T: Offers multiple output voltage options, allowing flexibility in powering different components within a system.

These alternative models provide similar functionality and can be considered as alternatives based on specific requirements.

Word count: 527 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MAX14745DEWX+T dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of MAX14745DEWX+T in technical solutions:

  1. Q: What is MAX14745DEWX+T? A: MAX14745DEWX+T is a highly integrated power management IC (PMIC) designed for use in portable devices, IoT applications, and other battery-powered systems.

  2. Q: What are the key features of MAX14745DEWX+T? A: Some key features include multiple voltage regulators, a charger, a fuel gauge, a push-button controller, and various protection circuits.

  3. Q: Can MAX14745DEWX+T support multiple voltage rails? A: Yes, it can support up to five different voltage rails, making it suitable for powering various components in a system.

  4. Q: Does MAX14745DEWX+T have built-in charging capabilities? A: Yes, it includes a charger with programmable current and voltage limits, allowing efficient and safe charging of the battery.

  5. Q: Can MAX14745DEWX+T monitor the battery's state of charge? A: Absolutely, it incorporates a fuel gauge that accurately measures the battery's state of charge and provides this information to the system.

  6. Q: Is MAX14745DEWX+T compatible with lithium-ion batteries? A: Yes, it is specifically designed to work with single-cell lithium-ion or lithium-polymer batteries.

  7. Q: How does MAX14745DEWX+T handle overvoltage and overcurrent protection? A: It includes overvoltage protection (OVP) and overcurrent protection (OCP) circuits to safeguard the system and prevent damage to connected devices.

  8. Q: Can MAX14745DEWX+T control the system's power sequencing? A: Yes, it has a push-button controller that can manage the power-up and power-down sequencing of various components in the system.

  9. Q: Does MAX14745DEWX+T have any sleep modes to conserve power? A: Yes, it offers multiple low-power modes, including a shutdown mode, to minimize power consumption when the system is not in use.

  10. Q: What is the package type for MAX14745DEWX+T? A: It comes in a small 40-pin TQFN (Thin Quad Flat No-Lead) package, which is suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific application and requirements.