Maxim Integrated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
DS2417P+T&R
Lihat Detail Lembar Data

DS2417P+T&R

Introduction

The DS2417P+T&R is a digital thermometer and thermostat sensor belonging to the category of temperature sensors. It is commonly used in various electronic devices and systems to measure and control temperature. This entry provides an overview of the DS2417P+T&R, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Temperature Sensor
  • Use: Measure and Control Temperature
  • Characteristics: Digital Thermometer and Thermostat Sensor
  • Package: T&R (Tape and Reel)
  • Essence: Accurate Temperature Sensing and Control
  • Packaging/Quantity: Tape and Reel Packaging, Quantity Varies

Specifications

  • Temperature Range: -55°C to +125°C
  • Accuracy: ±2°C from -10°C to +85°C
  • Resolution: 0.5°C
  • Supply Voltage: 3V to 5.5V
  • Interface: 1-Wire® Bus

Detailed Pin Configuration

  • Pin 1: GND (Ground)
  • Pin 2: DQ (Data Input/Output)
  • Pin 3: VCC (Power Supply)

Functional Features

  • Accurate Temperature Measurement
  • 1-Wire Interface for Easy Integration
  • Programmable Temperature Thresholds
  • Nonvolatile Memory for Storage

Advantages and Disadvantages

Advantages

  • Wide Temperature Range
  • High Accuracy
  • Simple Integration with 1-Wire Interface
  • Nonvolatile Memory for Data Storage

Disadvantages

  • Limited Resolution (0.5°C)
  • Requires 1-Wire Bus Master for Communication

Working Principles

The DS2417P+T&R operates by converting temperature into a digital signal using its internal sensor. It communicates with the host system through the 1-Wire interface, allowing for easy integration and data retrieval. The nonvolatile memory enables the storage of temperature thresholds and historical data.

Detailed Application Field Plans

The DS2417P+T&R finds applications in various fields, including: - HVAC Systems - Industrial Automation - Consumer Electronics - Automotive Systems - Medical Devices

Detailed and Complete Alternative Models

Some alternative models to the DS2417P+T&R include: - DS18B20: Digital Temperature Sensor with Higher Resolution - TMP36: Analog Temperature Sensor with Lower Power Consumption - LM35: Precision Analog Temperature Sensor with Linear Output

In conclusion, the DS2417P+T&R is a versatile digital thermometer and thermostat sensor with wide-ranging applications and reliable performance. Its accurate temperature measurement, 1-Wire interface, and nonvolatile memory make it a valuable component in temperature sensing and control systems.

[Word Count: 411]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan DS2417P+T&R dalam solusi teknis

  1. What is the DS2417P+T&R?

    • The DS2417P+T&R is a 1-Wire time chip with an integrated temperature sensor, real-time clock (RTC), and alarm functionality.

  2. How do I interface the DS2417P+T&R with my microcontroller?

    • You can interface the DS2417P+T&R with a microcontroller using the 1-Wire communication protocol, which requires only a single data line and ground connection.

  3. Can the DS2417P+T&R be used for temperature monitoring in my application?

    • Yes, the DS2417P+T&R includes a built-in temperature sensor that can accurately measure temperature and provide this data to your system.

  4. Does the DS2417P+T&R have battery backup for the real-time clock?

    • Yes, the DS2417P+T&R has an onboard power-fail monitor and a lithium energy source to maintain the real-time clock operation during power interruptions.

  5. What is the accuracy of the temperature sensor in the DS2417P+T&R?

    • The temperature sensor in the DS2417P+T&R has an accuracy of ±2°C over the temperature range of -10°C to +85°C.

  6. Can the DS2417P+T&R trigger alarms based on temperature thresholds?

    • Yes, the DS2417P+T&R has programmable high and low temperature alarm thresholds that can trigger an alarm output when exceeded.

  7. Is the DS2417P+T&R suitable for battery-powered applications?

    • Yes, the low power consumption of the DS2417P+T&R makes it well-suited for battery-powered applications, extending the operational lifetime of the device.

  8. What is the typical communication range for the 1-Wire interface of the DS2417P+T&R?

    • The 1-Wire interface of the DS2417P+T&R can typically communicate over distances of up to 100 meters, depending on the wiring and environmental conditions.

  9. Can the DS2417P+T&R be used in industrial environments?

    • Yes, the DS2417P+T&R is designed to operate reliably in industrial environments, with a wide temperature range and robust construction.

  10. Are there any application notes or reference designs available for integrating the DS2417P+T&R into technical solutions?

    • Yes, application notes and reference designs are available from the manufacturer to assist in the integration of the DS2417P+T&R into various technical solutions.