MX25V4006EM1I-13G

Product Overview

Category

MX25V4006EM1I-13G belongs to the category of non-volatile memory integrated circuits.

Use

This product is primarily used for storing and retrieving data in electronic devices such as microcontrollers, digital cameras, and mobile phones.

Characteristics

• Non-volatile: The stored data is retained even when power is removed.
• High capacity: The MX25V4006EM1I-13G has a storage capacity of 4 megabits (512 kilobytes).
• Fast access time: It provides quick read and write operations, ensuring efficient data transfer.
• Low power consumption: The device is designed to minimize power usage, making it suitable for battery-powered devices.

Package

The MX25V4006EM1I-13G is available in a small form factor package, commonly known as SOP-8 (Small Outline Package). This package is compact and allows for easy integration into various electronic devices.

Essence

The essence of MX25V4006EM1I-13G lies in its ability to provide reliable and high-capacity non-volatile memory storage for electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of MX25V4006EM1I-13G chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Memory Capacity: 4 Megabits (512 Kilobytes)
• Interface: Serial Peripheral Interface (SPI)
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Retention: Up to 20 years
• Erase/Program Cycles: 100,000 cycles

Detailed Pin Configuration

The MX25V4006EM1I-13G has a total of 8 pins, each serving a specific purpose. The pin configuration is as follows:

1. Chip Select (/CS): Used to enable or disable the device for communication.
2. Serial Clock (SCLK): Provides the clock signal for data transfer.
3. Serial Data Input (SI): Used to input data into the device during programming or writing operations.
4. Serial Data Output (SO): Outputs data from the device during read operations.
5. Write Protect (/WP): When this pin is enabled, it protects the memory from accidental write operations.
6. Hold (/HOLD): Allows the device to be temporarily paused during an ongoing operation.
7. Ground (GND): Connected to the ground reference of the system.
8. Power Supply (VCC): Supplies power to the device.

Functional Features

• Fast Read/Write Operations: The MX25V4006EM1I-13G offers high-speed data transfer, allowing for efficient read and write operations.
• Sector Erase Capability: It supports sector-based erasure, enabling selective erasure of specific memory sectors.
• Software Protection: The device provides software-based protection mechanisms to prevent unauthorized access to stored data.
• Low Power Consumption: Designed with power efficiency in mind, the MX25V4006EM1I-13G minimizes power consumption, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

• High storage capacity
• Fast access time
• Non-volatile memory
• Compact package size
• Low power consumption

Disadvantages

• Limited erase/write cycles
• Relatively higher cost compared to other memory technologies

Working Principles

The MX25V4006EM1I-13G utilizes the Serial Peripheral Interface (SPI) protocol for communication with the host device. It stores data in a grid of memory cells, with each cell capable of holding one bit of information. The device uses a combination of electrical charges and transistors to store and retrieve data.

During read operations, the host device sends commands and addresses to the MX25V4006EM1I-13G, which then retrieves the requested data and sends it back to the host device. Write operations involve sending data to be stored in specific memory locations within the device.

Detailed Application Field Plans

The MX25V4006EM1I-13G is widely used in various electronic devices that require non-volatile memory storage. Some common application fields include:

1. Microcontrollers: Used for storing firmware, configuration data, and program code.
2. Digital Cameras: Used for storing captured images and videos.
3. Mobile Phones: Used for storing user data, such as contacts, messages, and multimedia files.
4. Automotive Electronics: Used for storing critical data related to vehicle systems and diagnostics.
5. Consumer Electronics: Used in devices like smart TVs, set-top boxes, and gaming consoles for data storage purposes.

Detailed and Complete Alternative Models

1