M/A-Com Technology Solutions
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
JANTXV1N827UR-1
Lihat Detail Lembar Data

JANTXV1N827UR-1

Product Overview

Category:

The JANTXV1N827UR-1 belongs to the category of semiconductor devices.

Use:

It is commonly used as a high-reliability diode for various electronic applications.

Characteristics:

  • High reliability
  • Low forward voltage drop
  • Fast switching speed
  • High surge current capability

Package:

The JANTXV1N827UR-1 is typically available in a DO-41 package.

Essence:

This diode is essential for providing reliable and efficient rectification and protection in electronic circuits.

Packaging/Quantity:

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Maximum Reverse Voltage: [specify value]
  • Average Rectified Current: [specify value]
  • Forward Voltage Drop: [specify value]
  • Maximum Surge Current: [specify value]
  • Operating Temperature Range: [specify range]

Detailed Pin Configuration

The JANTXV1N827UR-1 has two pins, anode, and cathode, which are identified by their respective markings on the diode body.

Functional Features

  • Reliable rectification
  • Protection against reverse voltage
  • Fast switching for high-speed applications

Advantages

  • High reliability for critical applications
  • Low forward voltage drop minimizes power loss
  • Fast switching speed enhances circuit performance

Disadvantages

  • Higher cost compared to standard diodes
  • Limited availability from certain suppliers

Working Principles

The JANTXV1N827UR-1 operates based on the principles of semiconductor junction behavior, allowing current flow in one direction while blocking it in the reverse direction.

Detailed Application Field Plans

The JANTXV1N827UR-1 is widely used in: - Power supply units - Signal processing circuits - Electronic control systems - Automotive electronics - Aerospace and defense applications

Detailed and Complete Alternative Models

  • JANTXV1N827UR-2
  • JANTXV1N827UR-3
  • JANTXV1N827UR-4

Note: The alternative models may vary based on specific manufacturer designations.

This comprehensive entry provides a detailed overview of the JANTXV1N827UR-1, covering its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan JANTXV1N827UR-1 dalam solusi teknis

Sure, here are 10 common questions and answers related to the application of JANTXV1N827UR-1:

  1. What is the JANTXV1N827UR-1?

    • The JANTXV1N827UR-1 is a high-reliability, military-grade silicon rectifier diode designed for use in demanding applications.

  2. What are the key features of the JANTXV1N827UR-1?

    • The key features include high surge current capability, low forward voltage drop, and high reliability under harsh environmental conditions.

  3. What are the typical applications of the JANTXV1N827UR-1?

    • Typical applications include power supplies, inverters, converters, and other high-reliability electronic systems in aerospace, defense, and industrial sectors.

  4. What is the maximum forward voltage of the JANTXV1N827UR-1?

    • The maximum forward voltage is typically around 1.1 volts at a specified forward current.

  5. What is the maximum reverse voltage of the JANTXV1N827UR-1?

    • The maximum reverse voltage is typically around 200 volts.

  6. What is the operating temperature range of the JANTXV1N827UR-1?

    • The operating temperature range is typically from -65°C to +175°C, making it suitable for extreme environments.

  7. Is the JANTXV1N827UR-1 compliant with any specific industry standards?

    • Yes, it is compliant with MIL-PRF-19500/534, which ensures its suitability for military and aerospace applications.

  8. Can the JANTXV1N827UR-1 be used in high-frequency applications?

    • Yes, it can be used in high-frequency applications due to its fast switching characteristics.

  9. What packaging options are available for the JANTXV1N827UR-1?

    • It is available in various package options such as axial lead, surface mount, and chip form to accommodate different assembly requirements.

  10. Are there any recommended design considerations when using the JANTXV1N827UR-1?

    • Design considerations include proper heat sinking, current derating, and protection against transient over-voltage events to ensure reliable operation in the intended application.