Littelfuse Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
5KP10
Lihat Detail Lembar Data

5KP10 Product Overview

Introduction

The 5KP10 is a high-power transient voltage suppressor (TVS) diode designed to protect electronic circuits from voltage transients. This entry provides a comprehensive overview of the 5KP10, including its product details, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Product Information Overview

  • Category: Electronic Component
  • Use: Voltage Transient Suppression
  • Characteristics: High Power, Fast Response Time
  • Package: DO-201AD
  • Essence: Protection against Voltage Transients
  • Packaging/Quantity: Tape & Reel, 500 units per reel

Specifications

  • Peak Power Dissipation: 5000 W
  • Breakdown Voltage: 10 V
  • Operating Voltage: 8.55 V
  • Maximum Clamping Voltage: 14.5 V
  • Peak Pulse Current: 227.3 A
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 5KP10 TVS diode has a standard DO-201AD package with two leads. The anode is connected to the positive side of the circuit, while the cathode is connected to the ground or negative side.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect sensitive electronic components.
  • Fast Response Time: Rapid reaction to voltage transients ensures minimal impact on the protected circuitry.

Advantages

  • High Power Handling: Capable of dissipating large amounts of transient power.
  • Robust Protection: Shields electronic circuits from voltage spikes and surges.
  • Wide Operating Temperature Range: Suitable for diverse environmental conditions.

Disadvantages

  • Reverse Recovery Time: May exhibit a slight delay in returning to a non-conducting state after a transient event.

Working Principles

When a voltage transient occurs, the 5KP10 TVS diode rapidly conducts, diverting excess current away from the protected circuit. This action limits the voltage across the circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The 5KP10 is commonly used in various applications, including: - Power Supplies: Protects power supply units from voltage surges. - Telecommunication Equipment: Safeguards sensitive telecom devices from lightning-induced transients. - Automotive Electronics: Shields automotive control systems from electrical disturbances.

Detailed and Complete Alternative Models

  • 5KP6.8: Similar TVS diode with lower breakdown voltage (6.8 V).
  • 5KP13: Comparable TVS diode with higher breakdown voltage (13 V).
  • 5KP15A: Alternative model with higher peak pulse current handling capacity.

In conclusion, the 5KP10 TVS diode offers robust transient voltage suppression capabilities, making it an essential component in protecting electronic circuits from damaging voltage transients.

Word Count: 410

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 5KP10 dalam solusi teknis

  1. What is 5KP10 and its application in technical solutions?

    • 5KP10 is a type of transient voltage suppressor diode that is commonly used to protect electronic circuits from voltage spikes or transients.

  2. How does a 5KP10 work in protecting electronic circuits?

    • When a voltage spike occurs, the 5KP10 diode conducts and shunts the excess energy to ground, preventing it from reaching sensitive components.

  3. What are the typical voltage and current ratings for a 5KP10?

    • The 5KP10 typically has a peak pulse power rating of 5000 watts and a clamping voltage of 10 volts.

  4. In what kind of applications are 5KP10 diodes commonly used?

    • 5KP10 diodes are commonly used in power supplies, automotive electronics, telecommunications equipment, and industrial control systems.

  5. Are there any specific considerations when using 5KP10 diodes in high-frequency applications?

    • In high-frequency applications, it's important to consider the capacitance of the 5KP10 diode to ensure it doesn't introduce unwanted signal distortion.

  6. Can 5KP10 diodes be used for surge protection in outdoor or harsh environments?

    • Yes, 5KP10 diodes are often used for surge protection in outdoor or harsh environments due to their rugged construction and ability to withstand transient events.

  7. What are the key differences between 5KP10 and other types of transient voltage suppressor diodes?

    • One key difference is the higher power handling capability of the 5KP10 compared to smaller TVS diodes, making it suitable for higher energy transients.

  8. How should 5KP10 diodes be mounted on a PCB for optimal performance?

    • To ensure optimal performance, 5KP10 diodes should be mounted as close as possible to the input terminals of the circuit they are protecting, with short traces to minimize inductance.

  9. What are the temperature considerations for 5KP10 diodes in operation?

    • 5KP10 diodes have a wide operating temperature range, typically from -55°C to 175°C, making them suitable for a variety of environmental conditions.

  10. Are there any industry standards or certifications that apply to the use of 5KP10 diodes in technical solutions?

    • Yes, 5KP10 diodes may need to comply with industry standards such as IEC 61000-4-5 for surge immunity, and certifications like UL or CE depending on the application and location.