Linear Technology/QD Devices
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LTC6811IG-2#3ZZTRPBF

LTC6811IG-2#3ZZTRPBF

Overview

Product Category

The LTC6811IG-2#3ZZTRPBF belongs to the category of integrated circuits (ICs) specifically designed for battery management systems.

Use

This product is primarily used in applications where accurate monitoring and control of battery parameters are essential, such as electric vehicles, renewable energy systems, and portable electronics.

Characteristics

  • High precision: The LTC6811IG-2#3ZZTRPBF offers exceptional accuracy in measuring battery voltage, current, and temperature.
  • Multi-cell support: It can handle up to 12 series-connected battery cells, making it suitable for a wide range of battery pack configurations.
  • Communication interface: The IC supports an isolated serial communication interface, enabling seamless integration with microcontrollers or other control systems.
  • Fault detection: It incorporates various protection features like overvoltage, undervoltage, and overtemperature detection, ensuring safe operation of the battery system.
  • Low power consumption: The LTC6811IG-2#3ZZTRPBF is designed to minimize power consumption, thus extending the battery life.

Package and Quantity

The LTC6811IG-2#3ZZTRPBF is available in a small-outline integrated circuit (SOIC) package. It is typically sold in reels containing a specified quantity of units, usually 250 or 1000 pieces per reel.

Specifications

  • Operating Voltage Range: 2.7V to 5.5V
  • Number of Battery Cells: Up to 12
  • Measurement Resolution: 16 bits
  • Communication Interface: Isolated SPI
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOIC

Pin Configuration

The LTC6811IG-2#3ZZTRPBF has a total of 48 pins. Here is a detailed pin configuration:

  1. VREF-
  2. VREF+
  3. GPIO1
  4. GPIO2
  5. GPIO3
  6. GPIO4
  7. GPIO5
  8. GPIO6
  9. GPIO7
  10. GPIO8
  11. GPIO9
  12. GPIO10
  13. GPIO11
  14. GPIO12
  15. GPIO13
  16. GPIO14
  17. GPIO15
  18. GPIO16
  19. GPIO17
  20. GPIO18
  21. GPIO19
  22. GPIO20
  23. GPIO21
  24. GPIO22
  25. GPIO23
  26. GPIO24
  27. GPIO25
  28. GPIO26
  29. GPIO27
  30. GPIO28
  31. GPIO29
  32. GPIO30
  33. GPIO31
  34. GPIO32
  35. GPIO33
  36. GPIO34
  37. GPIO35
  38. GPIO36
  39. GPIO37
  40. GPIO38
  41. GPIO39
  42. GPIO40
  43. GPIO41
  44. GPIO42
  45. GPIO43
  46. GPIO44
  47. GPIO45
  48. GPIO46

Functional Features

The LTC6811IG-2#3ZZTRPBF offers the following functional features:

  1. Battery voltage measurement: It accurately measures the voltage of each battery cell in a series-connected configuration.
  2. Current sensing: The IC provides precise current measurements, enabling accurate monitoring of battery charging and discharging.
  3. Temperature monitoring: It includes temperature sensors to monitor the battery pack's temperature, ensuring safe operation.
  4. Communication interface: The isolated SPI interface allows seamless communication with external control systems.
  5. Fault detection and protection: The IC incorporates various protection mechanisms to detect and prevent overvoltage, undervoltage, and overtemperature conditions.

Advantages and Disadvantages

Advantages

  • High precision measurements ensure accurate monitoring of battery parameters.
  • Multi-cell support allows flexibility in battery pack configurations.
  • Isolated communication interface ensures reliable data transfer.
  • Comprehensive fault detection and protection features enhance the safety of battery systems.
  • Low power consumption extends battery life.

Disadvantages

  • Limited to a maximum of 12 series-connected battery cells.
  • Requires external microcontroller or control system for full functionality.

Working Principles

The LTC6811IG-2#3ZZTRPBF operates based on the principle of measuring voltage differentials across each battery cell. It utilizes an internal analog-to-digital converter (ADC) to convert the measured voltages into digital values. These values are then communicated through the isolated SPI interface to an external microcontroller or control system for further processing and analysis.

The IC also incorporates temperature sensors to monitor the battery pack's temperature, ensuring safe operation. Fault detection mechanisms continuously monitor the battery parameters, triggering appropriate actions in case of overvoltage, undervoltage, or overtemperature conditions.

Application Field Plans

The LTC6811IG-2#3ZZTRP

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LTC6811IG-2#3ZZTRPBF dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LTC6811IG-2#3ZZTRPBF in technical solutions:

Q1: What is LTC6811IG-2#3ZZTRPBF? A1: LTC6811IG-2#3ZZTRPBF is a specific model number for a battery stack monitor integrated circuit (IC) manufactured by Linear Technology (now part of Analog Devices). It is used for monitoring and balancing the voltage levels of individual cells in a battery stack.

Q2: What is the purpose of LTC6811IG-2#3ZZTRPBF? A2: The purpose of LTC6811IG-2#3ZZTRPBF is to accurately measure the voltage of each cell in a battery stack, detect any imbalances, and provide data for battery management systems to ensure optimal performance and safety.

Q3: How many cells can LTC6811IG-2#3ZZTRPBF monitor? A3: LTC6811IG-2#3ZZTRPBF can monitor up to 12 series-connected battery cells. It has 12 input channels, one for each cell.

Q4: Can LTC6811IG-2#3ZZTRPBF measure other parameters besides voltage? A4: No, LTC6811IG-2#3ZZTRPBF is specifically designed for measuring cell voltages only. It does not measure current, temperature, or other parameters directly.

Q5: How accurate is LTC6811IG-2#3ZZTRPBF in measuring cell voltages? A5: LTC6811IG-2#3ZZTRPBF has a typical measurement accuracy of ±0.04% of full-scale range. However, the actual accuracy may vary depending on factors such as noise, temperature, and calibration.

Q6: Can LTC6811IG-2#3ZZTRPBF balance the voltage levels of battery cells? A6: Yes, LTC6811IG-2#3ZZTRPBF has built-in balancing functionality. It can actively balance the voltage levels of individual cells by diverting excess charge from higher voltage cells to lower voltage cells.

Q7: What communication interface does LTC6811IG-2#3ZZTRPBF support? A7: LTC6811IG-2#3ZZTRPBF supports a serial communication interface called SPI (Serial Peripheral Interface). This allows it to communicate with microcontrollers or other devices.

Q8: Is LTC6811IG-2#3ZZTRPBF suitable for automotive applications? A8: Yes, LTC6811IG-2#3ZZTRPBF is commonly used in automotive applications where battery monitoring and management are critical, such as electric vehicles (EVs) and hybrid electric vehicles (HEVs).

Q9: Can multiple LTC6811IG-2#3ZZTRPBF ICs be connected together? A9: Yes, multiple LTC6811IG-2#3ZZTRPBF ICs can be daisy-chained together using the SPI interface to monitor larger battery stacks with more than 12 cells.

Q10: Are there any evaluation boards or development kits available for LTC6811IG-2#3ZZTRPBF? A10: Yes, Analog Devices provides evaluation boards and development kits that include LTC6811IG-2#3ZZTRPBF, allowing engineers to quickly prototype and test their battery management systems.