Lihat spesifikasi untuk detail produk.
LTC4273ITK-1
Product Overview
Category
LTC4273ITK-1 belongs to the category of integrated circuits (ICs) specifically designed for power management applications.
Use
This product is commonly used in various electronic devices and systems to manage power distribution, control, and monitoring functions.
Characteristics
- Integrated power management solution
- High efficiency and reliability
- Compact size
- Wide operating voltage range
- Advanced protection features
Package
LTC4273ITK-1 is available in a small form factor package, typically a 20-pin ThinSOT or similar package.
Essence
The essence of LTC4273ITK-1 lies in its ability to efficiently manage power distribution and control within electronic systems, ensuring optimal performance and protection.
Packaging/Quantity
LTC4273ITK-1 is usually packaged in reels or tubes, with a typical quantity of 250 units per reel/tube.
Specifications
- Input Voltage Range: 4.5V to 80V
- Output Voltage Range: Programmable from 0.8V to 60V
- Maximum Output Current: Up to 2A
- Operating Temperature Range: -40°C to 85°C
- Control Interface: I2C/SMBus compatible
Detailed Pin Configuration
- VIN: Power input pin
- VOUT: Power output pin
- GND: Ground reference pin
- SDA: Serial data input/output pin
- SCL: Serial clock input pin
- EN: Enable pin
- FAULT: Fault indication pin
- REF: Reference voltage pin
- MODE: Mode selection pin
- ...
(Note: Detailed pin configuration continues for all pins)
Functional Features
- Power distribution and control
- Voltage regulation and monitoring
- Overcurrent and overvoltage protection
- Thermal shutdown protection
- Fault indication and reporting
Advantages
- High efficiency power management
- Compact size for space-constrained applications
- Wide operating voltage range for versatility
- Advanced protection features ensure system reliability
- Easy integration with I2C/SMBus control interface
Disadvantages
- Limited maximum output current (up to 2A)
- Requires external components for complete power management solution
- Relatively higher cost compared to simpler power management ICs
Working Principles
LTC4273ITK-1 operates by receiving an input voltage (VIN) and regulating it to a programmable output voltage (VOUT). It incorporates various control mechanisms to monitor and protect the system from faults such as overcurrent, overvoltage, and thermal issues. The device communicates with the host system through the I2C/SMBus interface, enabling configuration and monitoring of power-related parameters.
Detailed Application Field Plans
LTC4273ITK-1 finds applications in a wide range of electronic systems, including but not limited to: - Industrial automation - Telecommunications equipment - Networking devices - Power distribution units - Embedded systems - Automotive electronics
In these applications, LTC4273ITK-1 provides efficient power management, ensuring stable operation and protection against potential faults.
Detailed and Complete Alternative Models
- LTC4272ITK-1: Similar functionality with slightly different specifications
- LTC4274ITK-1: Higher maximum output current capability
- LTC4275ITK-1: Lower cost alternative with reduced features
(Note: Additional alternative models can be listed here)
Word Count: 550
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LTC4273ITK-1 dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of LTC4273ITK-1 in technical solutions:
Q1: What is LTC4273ITK-1? A1: LTC4273ITK-1 is a Power over Ethernet (PoE) controller designed for use in various technical solutions.
Q2: What is the maximum power that LTC4273ITK-1 can deliver? A2: LTC4273ITK-1 can deliver up to 25.5W of power to connected devices.
Q3: Can LTC4273ITK-1 be used with both 802.3af and 802.3at PoE standards? A3: Yes, LTC4273ITK-1 is compatible with both 802.3af and 802.3at PoE standards.
Q4: What is the input voltage range supported by LTC4273ITK-1? A4: LTC4273ITK-1 supports an input voltage range of 36V to 57V.
Q5: Can LTC4273ITK-1 be used in industrial applications? A5: Yes, LTC4273ITK-1 is suitable for use in industrial applications due to its wide operating temperature range and robust design.
Q6: Does LTC4273ITK-1 support power management features? A6: Yes, LTC4273ITK-1 includes power management features such as prioritization and classification.
Q7: Can LTC4273ITK-1 be used in high-power applications? A7: Yes, LTC4273ITK-1 can be used in high-power applications as it supports the 802.3at standard, which allows for power delivery up to 25.5W.
Q8: Is LTC4273ITK-1 compatible with both Ethernet and Fast Ethernet? A8: Yes, LTC4273ITK-1 is compatible with both Ethernet (10 Mbps) and Fast Ethernet (100 Mbps) networks.
Q9: Does LTC4273ITK-1 support power sourcing equipment (PSE) or powered device (PD) applications? A9: LTC4273ITK-1 can be used in both PSE and PD applications, making it versatile for various system configurations.
Q10: What are the key features of LTC4273ITK-1? A10: Some key features of LTC4273ITK-1 include integrated power MOSFETs, programmable current limit, thermal shutdown protection, and a small form factor package.
Please note that these answers are general and may vary depending on the specific application and requirements.