Linear Technology/QD Devices
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
LTC1387CG#PBF
Lihat Detail Lembar Data

LTC1387CG#PBF

Product Overview

Category: Integrated Circuit (IC)

Use: LTC1387CG#PBF is a high-speed, low-power RS485/RS422 transceiver. It is designed to provide robust communication in industrial applications.

Characteristics: - High-speed data transmission - Low power consumption - Robust communication in noisy environments - Wide operating voltage range - ESD protection

Package: LTC1387CG#PBF comes in a 20-pin SSOP package.

Essence: This IC serves as a reliable interface between microcontrollers or other digital devices and the RS485/RS422 bus, enabling secure and efficient data transfer.

Packaging/Quantity: LTC1387CG#PBF is available in tape and reel packaging with a quantity of 250 units per reel.

Specifications

  • Supply Voltage Range: 3V to 5.5V
  • Data Rate: Up to 20Mbps
  • Operating Temperature Range: -40°C to 85°C
  • Receiver Input Sensitivity: ±200mV
  • Driver Output Voltage Swing: ±1.5V into a 54Ω load
  • Quiescent Current: 300μA (typical)
  • Shutdown Current: 1μA (maximum)

Pin Configuration

LTC1387CG#PBF has a total of 20 pins. The pin configuration is as follows:

Pin 1: DE (Driver Enable) Pin 2: RE (Receiver Enable) Pin 3: RO (Receiver Output) Pin 4: DI (Driver Input) Pin 5: GND (Ground) Pin 6: A (Non-Inverting Differential Bus Terminal) Pin 7: B (Inverting Differential Bus Terminal) Pin 8: VCC (Supply Voltage) ... (Pins 9 to 20 are not listed for brevity)

Functional Features

  • High-speed data transmission: LTC1387CG#PBF supports data rates up to 20Mbps, making it suitable for applications requiring fast communication.
  • Robust communication in noisy environments: The IC incorporates ESD protection and features a receiver input sensitivity of ±200mV, ensuring reliable data reception even in electrically noisy environments.
  • Low power consumption: With a quiescent current of only 300μA, LTC1387CG#PBF minimizes power consumption, making it ideal for battery-powered devices.
  • Wide operating voltage range: The IC can operate within a wide voltage range of 3V to 5.5V, providing flexibility in various applications.

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Robust communication in noisy environments - Low power consumption - Wide operating voltage range - ESD protection

Disadvantages: - Limited pin configuration options - Not suitable for applications requiring higher data rates beyond 20Mbps

Working Principles

LTC1387CG#PBF operates as an RS485/RS422 transceiver by converting the digital signals from a microcontroller or other digital device into differential voltage signals suitable for transmission over long distances. It uses a combination of driver and receiver circuits to achieve bidirectional communication on the RS485/RS422 bus.

The driver circuit amplifies the digital signals received from the microcontroller and converts them into differential voltage signals. These signals are then transmitted over the bus lines A and B. On the receiving end, the receiver circuit detects the differential voltage signals and converts them back into digital signals for further processing by the microcontroller.

The IC also incorporates features such as driver enable (DE) and receiver enable (RE) pins, which allow control over the direction of data transmission.

Detailed Application Field Plans

LTC1387CG#PBF finds applications in various industrial fields where reliable and high-speed communication is required. Some specific application areas include:

  1. Industrial Automation: The IC can be used in PLCs (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition) systems, and other automation devices to enable robust communication between different components.

  2. Building Automation: It can be employed in building management systems for efficient communication between sensors, actuators, and control units.

  3. Instrumentation: LTC1387CG#PBF can be utilized in measurement and control instruments, ensuring accurate and reliable data transfer.

  4. Robotics: The IC enables communication between different modules and controllers in robotic systems, facilitating seamless operation.

  5. Automotive: It can be integrated into automotive electronics for communication between various subsystems, such as engine control units, sensors, and displays.

Detailed and Complete Alternative Models

  1. MAX485: This IC offers similar functionality to LTC1387CG#PBF and is widely used in RS485/RS422 communication applications.
  2. SN75176:

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan LTC1387CG#PBF dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of LTC1387CG#PBF in technical solutions:

  1. Q: What is LTC1387CG#PBF? A: LTC1387CG#PBF is a specific model of a low-power, high-speed RS485/RS422 transceiver integrated circuit (IC).

  2. Q: What is the purpose of LTC1387CG#PBF? A: The LTC1387CG#PBF is designed to facilitate long-distance communication between devices using the RS485 or RS422 protocols.

  3. Q: What are the key features of LTC1387CG#PBF? A: Some key features include low power consumption, high data rates, wide supply voltage range, and built-in protection against electrical transients.

  4. Q: How can I connect LTC1387CG#PBF to my microcontroller or device? A: LTC1387CG#PBF typically connects to the UART or USART interface of your microcontroller or device using standard serial communication lines.

  5. Q: Can LTC1387CG#PBF be used for half-duplex communication? A: Yes, LTC1387CG#PBF supports both half-duplex and full-duplex communication modes.

  6. Q: What is the maximum data rate supported by LTC1387CG#PBF? A: LTC1387CG#PBF can support data rates up to 20 Mbps, making it suitable for high-speed communication applications.

  7. Q: Does LTC1387CG#PBF require external components for operation? A: Yes, LTC1387CG#PBF requires external resistors for termination and biasing, as well as capacitors for stability.

  8. Q: Is LTC1387CG#PBF compatible with 3.3V and 5V systems? A: Yes, LTC1387CG#PBF is compatible with both 3.3V and 5V systems, thanks to its wide supply voltage range.

  9. Q: Can LTC1387CG#PBF handle long-distance communication? A: Yes, LTC1387CG#PBF is designed for long-distance communication, with support for cable lengths up to several hundred meters.

  10. Q: Are there any application notes or reference designs available for LTC1387CG#PBF? A: Yes, the manufacturer of LTC1387CG#PBF provides application notes and reference designs that can help you in implementing the IC in your technical solution.

Please note that these answers are general and may vary depending on specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.