Knowles
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SPM0423HE4H

SPM0423HE4H

Introduction

The SPM0423HE4H is a surface-mountable, omnidirectional, digital microphone designed for various applications. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Digital Microphone
  • Use: Capturing audio in electronic devices such as smartphones, tablets, laptops, and IoT devices
  • Characteristics: Omnidirectional, surface-mountable, digital output
  • Package: Surface-mount package
  • Essence: High-quality audio capture in a compact form factor
  • Packaging/Quantity: Typically available in reels or trays

Specifications

  • Sensitivity: Typically -26 dBFS
  • Signal-to-Noise Ratio (SNR): Up to 64 dBA
  • Frequency Range: 100 Hz to 10 kHz
  • Supply Voltage: 1.5 V to 3.6 V
  • Current Consumption: 180 µA at 1.8 V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VDD: Power supply input
  2. GND: Ground connection
  3. DOUT: Digital output

Functional Features

  • Omnidirectional pickup pattern for capturing sound from all directions
  • Digital output for direct interface with digital signal processors or microcontrollers
  • Low power consumption for energy-efficient operation
  • Wide operating temperature range for versatile environmental conditions

Advantages and Disadvantages

Advantages

  • Compact size and surface-mountable design
  • High sensitivity for clear audio capture
  • Digital output eliminates the need for analog-to-digital conversion
  • Wide frequency range suitable for various audio applications

Disadvantages

  • Limited frequency range compared to some high-end studio microphones
  • Sensitivity to environmental noise due to omnidirectional pickup pattern

Working Principles

The SPM0423HE4H operates based on the principle of converting sound waves into electrical signals. Its omnidirectional nature allows it to capture sound from all directions, and the digital output simplifies integration with digital systems.

Detailed Application Field Plans

  1. Smartphones: Integration into smartphone designs for voice calls, video recording, and voice commands
  2. Laptops and Tablets: Inclusion in portable computing devices for video conferencing, speech recognition, and multimedia recording
  3. IoT Devices: Incorporation into smart home devices, wearables, and other IoT products for voice control and audio sensing applications

Detailed and Complete Alternative Models

  1. SPM0408HE5H-WB: Similar omnidirectional digital microphone with enhanced SNR
  2. SPM1423HM4H-B: Unidirectional digital microphone for noise-cancelling applications
  3. SPM0204LE5H-1: Miniature digital microphone for space-constrained designs

In conclusion, the SPM0423HE4H digital microphone offers a compact and versatile solution for capturing high-quality audio in a wide range of electronic devices.

Word Count: 443

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SPM0423HE4H dalam solusi teknis

  1. What is the SPM0423HE4H?

    • The SPM0423HE4H is a miniature, high-performance, low power, bottom-port silicon microphone.

  2. What are the key features of the SPM0423HE4H?

    • The key features include a small form factor, high sensitivity, low power consumption, and a wide frequency response range.

  3. What are the typical applications for the SPM0423HE4H?

    • Typical applications include smartphones, tablets, laptops, wearables, IoT devices, and other consumer electronics.

  4. What is the frequency response range of the SPM0423HE4H?

    • The frequency response range is typically from 100Hz to 10kHz.

  5. What is the sensitivity of the SPM0423HE4H?

    • The sensitivity is typically -26 dBFS.

  6. What is the power consumption of the SPM0423HE4H?

    • The power consumption is typically very low, making it suitable for battery-powered devices.

  7. What is the recommended operating voltage for the SPM0423HE4H?

    • The recommended operating voltage is typically 1.64V.

  8. Is the SPM0423HE4H suitable for use in noisy environments?

    • Yes, the SPM0423HE4H has a high signal-to-noise ratio and is designed to perform well in noisy environments.

  9. Can the SPM0423HE4H be used for voice recognition applications?

    • Yes, the SPM0423HE4H is suitable for voice recognition and other audio capture applications.

  10. Are there any specific design considerations when integrating the SPM0423HE4H into a technical solution?

    • Designers should consider proper acoustic design, PCB layout, and signal processing to optimize the performance of the SPM0423HE4H in their specific application.